The Race Car Romance

I recently had the opportunity to interview one of my favorite up-and-coming racers and wanted to share with you some of her advice and story. This is just an awesome look into the winning mentality of one of SCCA’s Wendi Allen Scholarship prominent women Racers! From where she started to where she’s headed and some info in between, you’ll get a chance to hear direct from Johanna Foege in this interview.

Mazdaspeed 6 racing car

How long have you been racing? What got you started?

My brothers both got involved with auto-crossing while I was in college and were always trying to convince me to come out and race with them. It wasn’t until the end of 2011 when a friend offered me a co-drive in their Mazda3 (and a year after I purchased my first MazdaSpeed3) that I finally gave it a try.

At that first event, I ended up taking first in my novice (open) class of 7, on my first run, nonetheless! Naturally, I was immediately hooked.

Gray Racing Mazdaspeed 3

What have been the best outcomes for you since starting racing?

This year I received the SCCA Wendi Allen Scholarship. I suppose this means that I’ve made enough positive impressions on SCCA members to have been nominated for this award, which is intended for young women drivers that show promise at driving and inspiring other women. This scholarship has made a crazy year of racing possible for me, and I’m so grateful to have received the recognition and the opportunity to compete in 8 national tour events throughout 2018!

What have been your best standings thus far?

My first taste of victory was at a local event in Champaign, IL when I took the fastest run of the day (out of all the drivers), in the Mazdaspeed6 back in June 2014. I’ve only made it to one National event which was in September 2017 at Lincoln, NE, but I managed to trophy there, finishing 3rd in my class. And just last week at the Championship Tour Event in Peru, IN, I managed to finish 16th out of 275 drivers.

What do you believe is the best MOD for racing – if you had to pick the best one?

I think this entirely depends on your car and the kind of racing you do! For autocross, the rear sway bar has been my favorite in my Mazdaspeed3, as it helps combat the understeer, pushy front-wheel drive characteristics. My favorite mod on the Mazdaspeed6 has been the custom valved, high spring rate coilover setup since that car has relatively soft suspension and a lot of body roll from the factory.

What is your favorite MOD – other than the Driver Mod, which we know you invested in already?

If awesome tires count as a mod, definitely that! All other mods depend entirely on how much grip your tires have on the surface at any given moment. This applies to the street, too. Also, have you seen our Hoosiers?

What has been the most memorable mistake you’ve made on the track?

At 2017 SCCA SOLO Nationals, I had a KILLER run- 0.7 seconds faster than the rest of mine, and 0.5 seconds ahead of first place in my class. I’d been working on looking ahead while driving throughout the year and was doing such a good job of this that I hit a cone that was right in front of me on that run. I remember seeing it at the last second and thinking, “There’s no way I’m getting around that now!” What I didn’t know at that moment, was that cone was going to cost me first place at my first Nationals.

Mazdaspeed 6 Track racing

What is your best advice for other Drivers starting out?

Take a school, ask people for help and advice (and be receptive to it), and don’t give up! Don’t be too hard on yourself, driving skills take a long time to polish, and do come more naturally to some people. In the end, racing is really about mental preparation, confidence, and ambition composure on course.

Why do you believe women in racing is important?

I think it’s time we see a paradigm shift about the activities that women (and men) pursue. I’m all about supporting whatever healthy hobbies people find themselves interested in, and I don’t think there needs to be gender stereotypes associated with any of them. I love to see women participating in motorsports because it serves as a reminder to all that we are on the same playing field as men, and are capable of just as much. As more women enter the world of racing, I really hope it opens the door to other ladies feeling comfortable pursuing what has historically been an atypical interest. I just hear way too many women say “That’s so cool that you race, but I could never do that!” You can, and you should give it a try!!! Maybe someday, they will.

SCCA Women Racers

Lastly, feel free to add anything you’d like the public to know about you, your car or your racing experience!

I’ve made efforts in the Mazdaspeed (forum) community to support and encourage all members, but particularly other women, to participate in the sport of autocross. I’ve taken part in organizing four different national meets, and assured autocross was on our schedule at each one. I also made myself available to instruct at these events, and really focused on getting the women members to take part with me. I’ve gotten several of the local member’s girlfriends into the driver’s seat at autocross events as well. It has been rewarding to watch them find enjoyment from it and help them grow into better drivers, as many have found it easier to learn from a fellow woman, than their significant other, lol.

Mazdaspeed 6 woman racer

My teammate and partner of 5 years, Clint, and I live nearly 600 miles apart. He’s been my inspiration, engineer, coach, mechanic, and best friend all along, and I credit him for bringing me to where I am today, and for building us an amazingly capable and unique car. I just started a blog to keep track of our long-distance relationship racing adventures this year, as well as driving tips, goals, and my progress through each event!

Connect with us

You may also like

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

2018 CorkSport Garage Update

CorkSport's Mazda 3 guide.

CorkSport Garage

How about something a little different from the usual CS blog? I thought I would give you all a little insight into all the different Mazdas that are owned by employees. Some are daily drivers, some are full racecars, and some are…different (more on that later). So grab a cold refreshment, we’ve got quite a few cars to go through.

The Mazdaspeeds

Mazdaspeed Miata
Owner: Corey
Year/Model: 2004 Mazdaspeed Miata
Mileage: 28,800

Modifications: Full Flyin’ Miata CAI, polished stainless piping, Turbosmart recirculating bypass valve, manual boost controller, O2 signal modifier, boost gauge. Recent Mustang Dyno showed a consistent 189.9WHP.

Corey’s Comments: Purchased new to me at 17,000 miles in 2012 for my 40th birthday. The Mazdaspeed Miata had been stored for 4 years-everything was original, even the tires. This Miata came from California and had never seen rain. I keep it in the garage and it’s mainly a fair weather/weekend car except during the summer. I enjoy taking a ride in the MSM with each of my kids, but love honking the horn at people and making my son wave back…like he knows them.

2009 Red Mazdaspeed 3  GT
Owner: Luke
Year/Model: 2009 Mazdaspeed 3 GT
Mileage: 124,000

Modifications: Full bolted, built engine, CS prototype turbo, methanol injection. Too many CorkSport Parts.

Luke’s Comments: Car has been through stock turbo/stock block, CS turbo/stock block, CS turbo/built block, 35r/built block, and now CS prototype turbo/built block.  Fun fact: my girlfriend went faster in my car than I did when I first bought it.  Stock turbo went 12.8 @ 110mph in the  1320.

Owner: Daniel
Year/Model: 2007 Mazdaspeed 6
Mileage: 68,000

Modifications: Custom front license plate delete, CS Interior LED Kit, daily driver dirt.

Daniel’s Comments: Just bought the Mazdaspeed6 a few weeks ago, doing a ton of maintenance before mods. This er fleet vehicle (whatever that means). Bought it from a guy who owned it the past ~9 years. Hoping to sneak some new Mazdaspeed 6 parts into the CS catalog and feed the zoom-zoom obsession!

Owner: CorkSport (shop car)
Year/Model: 2013 Mazdaspeed 3
Mileage: 14,000

Modifications: Virtually everything in the CS catalog for MS3. Plus a few prototype parts that never made their way to the market.

Comments:  Affectionately called “Whitey”. On its 2nd built engine (we use and abuse this thing). This was one of Vincent’s first projects when he arrived at CS: rebuild Whitey’s engine. He just got done rebuilding it for the second time and is now breaking it in.

Owner: Barett
Year/Model: 2009 Mazdaspeed 3
Mileage: ~135,000

Modifications: Manley internals, L19 head studs, CS cams, bowl work & porting, all the bolt-ons, 28gph methanol injection, prototype CS turbo, 330mm BBK, other suspension bits.

Barett’s Comments: More info on the engine build here. Made ~465whp at the 2017 CS dyno day. My car hates me and is a constant work in progress. (Check out all the updates for Barett’s Mazdaspeed 3)

Owner: Brett
Year/Model: 2013 MazdaspeeD 3
Mileage: 37,000

Modifications: Full CS bolt-ons, big turbo, meth injection, making 430whp 385ft-lbs. BC coilovers w/ custom rated Swift springs, BMSPEC front splitter, Varis rear diffuser, custom side skirt extensions, Volk TE37SL: front 18×11 rear 18×10, paint matched 240Z flares, 330mm Mazdaspeed3 Big Brake Kit.

Brett’s Comments:  I’ve had the Mazdaspeed3 for about 4 years now. It has every CS bolt on in the catalog. Helps that I work here now. This MS3 makes ~430 WHP, and is a stock block for now; built block soon to come. I take more pictures of this car than I do anything else. 

The GEN 3’s

CorkSport's Mazda 3 guide.
Ready to mod your Mazda 3? You will be after you read this!
Owner: Jennifer
Year/Model: 2014 Mazda 3 2.5L Hatch
Mileage: 100,000

Modifications: Most of the CS catalog for GEN3: Intake, exhaust, lowering springs, adjustable struts, rear sway bar, aluminum skid tray, etc., GEN2 MS3 wheels, big CS livery.

Jennifer’s Comments: The car has been used for the majority of the Mazda3 research and design at CS. This Mazda 3 is daily driven ~80miles each day to torture test CorkSport parts, it helps that the commute to my house is that far round trip. Basically, my daily drive is a perfect example of “running up a hill both ways” for this Mazda 3.  

(Left)

Owner: Collin
Year/Model: 2016 Mazda 6
Mileage: 40,000

Modifications: CS RSB, prototype CS Front Strut Bar, CS RMM, prototype CS performance header, CS license plate kit.

Collin’s Comments: Aside from the performance parts available at CS, I chose this car due to the extra ~30HP compared to most commuter cars. I still get 42MPG on my freeway commute. This is my first New Car I bought myself and I have loved learning how to modify on it. 

(Right)

Owner: Rich
Year/Model: 2014 Mazda 6 GT

Modifications: CS lowe\ring springs/struts, CS front camber plates, CS rear camber arms, CS SRI, CS catback, CS radio control knob, CS license plate kit, 25mm wheel spacers

Rich’s Comments: I drove around the same B2300 for many years while we built CorkSport from the ground up. I finally decided to treat myself and picked this Mazda6 up in 2014. Big shift, and I’ve loved having the luxuries of this Mazda 6

Owner: Derrick
Year/Model: 2014 Mazda 3 2.5L Sedan

Modifications: Caged, stripped, CS SRI, straight pipe to CS axleback, bunch of custom adjustable suspension, Big Brake Kit (sometimes), custom racetrack-modified bodywork.

Derrick’s Comments: This Mazda3 could not be sold as a road legal car, so I don’t drive it on the road. There are a TON of track hours on this Mazda 3 and all of it’s modifications. We basically TRY to break our test parts before we let them hit the market, which is good for me because I love to go fast.

Owner: CorkSport (shop car)
Year/Model: 2018 Mazda 3 2.5L Hatch
Mileage: 2900

Modifications: CS struts, CS lowering springs, CS camber plates, CS RMM.

Comments: Mainly stock so far, big things to come to the “CBR” (CorkSport Branded Ride). Brett, who has been dailying the CBR, somehow only is getting 23mpg. Expect more parts for facelifted GEN3’s with the CBR’s arrival.

The Others

Just because you may not have seen much about them and they don’t get their own category does not mean they’re not special. For me, some of the most interesting cars are down below.

Owner: CorkSport (shop truck)
Year/Model: 1995 Mazda B2300
Mileage: 160,000

Modifications: Sweet stickers for extra HP, tire shop wheels, custom faded paint

Comments: Vincent used to own this truck before selling it to be the “new” CS shop truck. He notes that it was involved in 3 accidents, each time the insurance company did not total the truck, leaving Vincent with more money than he spent to buy the truck. No power steering provides an arm workout for those lucky enough to drive this beast.

Owner: Derrick
Year/Model: 2016 Miata Launch Edition.
Mileage: 24,000

Modifications: Full CorkSport ND Miata catalogCS cold air intake, CS catback exhaust, CS front sway bar, rear sway bar, CS lowering springs, CS adjustable front end links, VersaTune CS parts tune, CS short shifter – Sparco Drift wheels, Bridgestone Blizzak run flats

Derrick’s Comments: The ND is an interesting car for me as being a lifelong Mazda enthusiast I had never owned a Miata before.  When the ND was announced I had already converted the Mazda 2 into a B-Spec car so I stopped street driving it and went back to my Rx7 turbo as my daily driver so I had gotten used to driving a car with “issues” again.  When I got into the ND for the first time and drove it home it was very surreal expecting some weird sound or smelling hydrocarbons (the Rx7 is old and catless) and the car handled incredible right out of the box.  Of course that lasted all of 3 months until we have Kenton Koch behind the wheel helping us out with the suspension development.  It is one of those cars that I warn people, if you drive it you will want to buy one.

Owner: Vincent
Year/Model: 2010 Mazda RX-8 R3
Mileage: 60,000 (original engine, no issues)

Modifications: Turbo XS exhaust, K&N high flow filter, custom VersaTune tune, DBA club spec rotors, Hawk Street/Race pads, Goodridge stainless steel brake lines.

Vincent’s Comments: I had been wanting a 2nd gen RX-8 since high school. This thing revs out to 9400RPM and is super fun to drive. Just recently sold (hi Aaron) but too good to not include in this blog.

Owner: Derrick
Year/Model: 1993 Spec Miata
Mileage: “Lots and lots” (this car has run 25hours of Thunderhill a few times on top of all its other racing)

Modifications: Spec Miata Bilstein shock package, Eibach swaybars, illegal plunge cut cylinder head (lookup spec Miata plunge gate 2014), GLoc brakes, 949 6ul Spec Miata wheels, AIM dash & datalog system, ESR drive side drop floor, Really big radiator.

Derrick’s Comments: I took the advice of all the spec miata people and bought a built car so I didn’t have to spend 6 months building one myself.  The local car was raced for a long time in the northwest and was a front running car before it was parked for a few years.  I picked it up for ~6k with some extra spares and was immediately able to get on the track and go racing after the installation of the drop floor and new seatbelts.  The big question I have people ask me is why did you get a SM?  The real answer is the level of drivers in the class.  At any sanctioned race event weekend there are always SM and someone to race against and I have personally known several drivers go into SM a novice and come out the other side in pro racing.  To win at SM you have to have your shit together.  To be the best you need to compete against and beat the best so here I am.

Owner: Barett
Model: Mazda B2600i
Mileage: ?

Modifications: Solid axle swap with Toyota running gear, 4.88:1 axle gears, rear locker, 3 feet of articulation, 8000lb winch, high bolstered seats, 35×14.5R15 Super Swamper Bogger Tires, “lots of f*ckery fabrication.”

Barett’s Comments: This was my first real vehicle, and it taught me lots about owning a vehicle, modifying a vehicle and I have more memories with this beast than I can come up with right now. I beat the SH*T out of this truck and it’s always put away wet.

 Owner: Rich
Model: 1988 Mazda Rx- CONVERTIBLE

Modifications: Turbo engine swap, Apexi Power FC, CS Border Style body kit, CS front mount intercooler, CS turbo back exhaust, many other mods.

Rich’s Comments: The Rx-7 is kept in the garage and it’s mainly a fair weather/weekend car except during the summer. I take it out for special occasions or to just show off every once in a while. It’s a nostalgia piece for me. 

Not Pictured:

  • 2016 Mazda 3 Sedan. Derrick’s 2nd racecar. Caged, stripped, 2.0L AT converted to 2.5L MT.
  • Mazda RX-7 FC. Owned by Derrick.
  • NA Mazda Miata. Parts car for Derrick’s Spec Miata
  • Mazda 5. Derrick’s wife’s car.
  • Mazda CX7. Kelly’s daily driver.

For those keeping score, that’s 22 Mazdas in the CorkSport garage. The cars have come and gone over the years but one thing will always stay true: our cars will be fun to drive because they are Mazdas. Here’s to more Mazdas finding their way into the CS (and your) garage.

Oh and if you have any questions on the above cars, please let us know down below, we’ll be sure to pass on your question to the car’s owner.

-Daniel

Connect with us

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

Brett’s Mazdaspeed 3 Build: Part 1, The Basic Beginnings

It all started in Phoenix AZ, back in 2014 when I was graduating tech school. I was finally working enough to buy a Mazdaspeed that I had wanted for a while. At this time, it probably would have been smart for me to just start saving, instead of taking on a hefty car payment. But, as a car enthusiast, I’m sure you understand the temptations we often face, and I went for it. Since then, I’ve never looked back.

Red 2013 Mazdaspeed 3

 

I found my 2013 Mazdaspeed3 in the fall. Completely spotless, 6k miles on it, and bone stock. It was truly a blank canvas. At that time I was barely making enough to own the car and pay for insurance. So, modding wasn’t an option at the time. So, as I saved and Saved, I was introduced to Nator Arizona by Thomas Graham, who later became a good friend of mine. He got me involved in the community, and on the right track for learning. From that point on, everything changed, and I loved it.

At the time, I was nothing more than a technician, fresh out of school and stuck on the lube rack for a bit. So, as you can imagine when I finally had enough to get my Accessport and Fuel Pump internals for the Mazdaspeed 3, I was STOKED. I caught the modding bug, and before I knew it, I had bigger aspirations for the car than ever thought I would have had. The next year was filled with countless Nator garage days, fun drives, Mexico pulls, and slowly adding parts when I could afford them.

By mid-2015, my time in AZ was coming to a close. At this point, I had all the basic bolt-ons offered for the Mazdaspeed 3. Rear motor mount, short ram intake, upgraded BPV,  upgraded TMIC, and turbo back exhaust. The car otherwise looked completely stock, just MUCH louder!  The icing on the cake was the pro-tune 320 WHP on Stock turbo with some e85. A couple of days later I departed AZ for my next chapter and got the MS3 on the trailer.

Towing Mazdaspeed 3

Funny looking back now, how I thought I was done with my Mazdaspeed, and that was enough power to keep me happy. Not even close! The next couple years would be the catalyst that started to shape my MS3 into what it looks like now. Stay tuned for Part 2!

Mazdaspeed 3

Connect with us

You may also like

Ceramic Coating: Hype or Reality?

Ceramic coating has been an up and coming thing for the past few years now.

By now I’m sure most of you have heard of it a time or two. Car enthusiasts have been utilizing it more and more as it has grown in popularity. Most professional detail shops offer this service now, but it doesn’t come cheap.

You may be asking yourself:

Why is this so expensive?

Why is it better than Wax?

Does it work that well?

I was skeptical at first too. I figured it was just the next curved TV. The next fad that’s taking over. However, I have a close friend here in the PNW that does professional detailing, and he convinced me to give it a shot. Afterwards, all I can say is, the hype is very real, and this stuff is amazing! My Mazdaspeed3 looks amazing! I used C-Quartz, but there are lots of different brands and options out there.

I’m going to walk you guys through the process it takes to do the ceramic coat, and you can decide for yourself if it’s truly worth it for you and your Mazda.

So what is Ceramic Coating?

Ceramic Coating is essentially a new achievement in car paint coating.

It chemically bonds to the paint surface allowing for a “Permanent” paint seal. Protecting it from dust, dirt, oxidation, chemicals, or anything that can compromise the paint. Unlike wax, it won’t break down or wash away in a few months. Depending on how many coats you have of ceramic, it can last from months to years.

That’s right… Years.

For those that want to keep their paint sealed and protected for a long time, even after rough winters, this will be the best way to do it. Water, dust, grime, anything that normally sticks to your paint, will have a much tougher time staying in your car due to the properties of the ceramic.

It has fantastic UV protection, and cleaning your car will take half the time. Not only because it prevents as much dirt from staying on your car, but because the water beads off and drying is so much faster! You can even do it on wheels and calipers to prevent dust from sticking as bad, making it much easier to keep clean and looking nice.

The Process

Even for an excellent detailer, this is still a day-long process, if not more. It takes great attention to detail, and some elbow grease to fully prep the car for the ceramic coating. Think of it like painting anything, the better the prep work, the better the final product will be.

It all starts with a car wash/ bath for your Mazda. Remove all the big stuff. Bugs, dirt, grime, etc.

Next comes a full paint correction. They need to get it as smooth and free of defects as possible. In this picture, you can clearly see the difference between left and right sides.

A clay bar is now put to work. Removing any bonded contaminants to the paint. Any bumps that can be felt with your fingers, will be removed, causing the paint to feel smooth like glass again. Quick spray wax is typically used as a lubricant to prevent scratching.

The amazing thing about a clay bar is that it reveals on the contaminants you can’t typically see as well.

After this, the time now comes for the polish! The clear coat is essentially “Rearranged” by heat generated from the polish and the buffing pad. Making it even smoother and glossy again. It takes a lot of practice to know when it’s just right, and not go too far. Otherwise, it will burn the paint.

Now that the swirl Marks are gone, we use what’s called an IPA (Not the 5’Oclock somewhere kind of IPA) This is an isopropyl alcohol and water mixture that will get rid any polish and oil from the paint and lift dust to be removed. Creating a perfect bonding surface to apply the ceramic. This will allow for a stronger chemical bond to the paint.

 

Now comes the time we have all been waiting for; the application process.

A small applicator that involves a foam block and a suede microfiber cloth is used. Ceramic is applied to the cloth, and then its wiped onto the paint. The method is like wax, in the regard that it must harden a bit before it is buffed off. They go panel by panel and apply it, then wipe off. It is important that the cloth is monitored for hardness too.

The ceramic in the cloth will eventually harden, and then it becomes unusable. The number of coats they do depends typically on how much you pay for. The more coats, the longer it will last.

After the coat, its good to give the ceramic about a day to harden. Then this silica sealant can be applied. This preserves and maintains the ceramic. Every few months apply this to the car like a spray wax to keep it glossy and shiny.

The best part is finally being able to do the first wash (Give it about a week or so before the first wash) and seeing how well it repels the water. It practically jumps off the car. But the crazy part is, it will continue to do this for months, or even years. A normal wax coating to protect your paint Is no longer necessary. Just can sit back and relax knowing the paint is protected.

For anyone who loves their car and maintaining the paint. You will truly enjoy the outcome of this. Professional shops charge quite a bit. But I know plenty of DIY guys like myself that enjoy putting in the elbow grease. Either way, I believe its worth it, no matter the Mazda or Mazdaspeed you’re driving, and I thought I would share my experience with the Mazda Family!

Thanks for checking in,

Regards,
CorkSport Team

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

You may also like:

Mazda 3 TCR

An interesting article popped up a few days ago in which John Dagy, a journalist with Sportscar365, was discussing the TCR class of cars with John Doonan, the head of Mazda Motorsports program.

I have been following the TCR series for a while now with some interest in it as the car Mazda offers that fits best is the Mazda 3, and I enjoy the time I have had racing CorkSport’s Gen3 Mazda 3.

What is nice about the series is that it is meant to race four-door saloons, all with a 2.0 turbo motor and a price-capped ceiling of 135,000.  Most people would freak out a bit with that price but what you are getting is a fully developed car with a spec sheet.  Each manufacturer designates a builder, whether themselves or a shop, to assemble the cars and provide support.

Mazda is in an interesting spot; they have their successful Global MX5 cup series and the IMSA Prototypes with Joest, but there is a middle-ground hole that has been filled with the older NC Miatas.  With the NCs not being a current production model, it makes sense to get something in there to fill in the blanks.

 In the past, Mazda had used the Mazdaspeed 3 as the basis, and it did well capturing the championships in PWC and IMSA ST class, but the lack of a turbo model makes this a challenge.

One option out there would be to use one of our upcoming 2.5 Skyactiv Mazda 3 turbo kits and bridge the gap so to speak to have a powerplant.  Granted the turbo kit is for the 2.5 but with enough encouragement and feedback from people, the 2.0 kit is looking likely.

Work on some aero and really good suspension, and you would be set.  Maybe I am just daydreaming too much at work again….

-Derrick

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required