Home/Mazdaspeed 3/2010-2013 Mazdaspeed 3/Mazdaspeed 3 Parts Full Catalog

Mazdaspeed 3 Parts Full Catalog

Every 2010-2013 Mazdaspeed 3 performance part we offer is here listed out with no category filters in order from newest to oldest.

Billet aluminum is CNC machined and then anodized for great fitment and a clean look.

No need to hassle with OEM gaskets- an O-ring is supplied with each spacer for an easy install.

Three pre-tapped methanol ports can be used with most nozzles on the market.

Each methanol port is in a usable location, even with the stock intake manifold.

72mm Throttle Body Spacer for Mazdaspeed ...

$79.99

Quick view

Upgrade the look of your interior with the CorkSport Leather Wrapped Steering Wheel for the 2010-2010 Mazdaspeed 3 and Mazda 3.

Each leather steering wheel is hand stitched.

The CorkSport Performance Steering Wheel uses high quality genuine leather to upgrade the look of you interior.

Direct OEM bolt-on replacement with no modifications or stitching required.

Alcantara Suede

2010-2013 Mazdaspeed 3 Leather Steering W...

$379.99

Quick view

Our Mazdaspeed Dankai 1 engine utilizes Mahle Sport Compact pistons and Manley H Beam rods.

Both the Dankai 1 and Dankai 2 built engines include the CorkSport Mazdaspeed Camshafts installed.

Our Mazdaspeed 3 rebuilds include a range of new OEM Mazda replacement parts.

We perform cleanup work on the exhaust to improve flow over the OEM DISI head casting.

Our Dankai 1 have cleanup of both sides of the intake ports.

Dankai 1: Built Long Block for 2006-2013 ...

$5,999.99

Quick view

Ready to install DISI Turbo engine, no long waits required.

Our Mazdaspeed Dankai 2 engine utilizes Mahle Powerpak Plus pistons and Manley H Tuff rods.

Our Mazdaspeed 3 rebuilds include a range of new OEM Mazda replacement parts.

Both the Dankai 1 and Dankai 2 built engines include the CorkSport Mazdaspeed Camshafts installed.

Dankai 2 engines include ARP 625 head studs and the ARP main stud kit for the MZR

Optimized exhaust ports go beyond the clean up work on the OEM port over our Dankai 1 engines.

We removed the stock VTCS divider on the intake port and do extensive port work to improve flow.

Dankai 2: Built Long Block for 2006-2013 ...

$7,499.99

Quick view

13” 2-Piece Rotors & Large 4-Piston Forged Calipers Define the CorkSport BBK

The Complete Stage 2 BBK Provides all the needed components for the Street & Track

2-Piece Rotor Design provides proper strength and cooling in a light weight package

Old vs New, the CorkSport BBK provides more clamping force is a smaller package

Old vs New, the CorkSport 2-Piece Rotors provide more thermal capacity and brake fad resistance due to the larger diameter and thicker rotor

Mounted and ready for action, the CorkSport BBK is ready for the track and the back roads

13" Big Brake Kit for 2007-2013 Mazdaspee...

$1,599.99

Quick view

Quick readouts at a glance

Audio and visual warnings can be programmed for limit values.

Mazdaspeed Coolant Temperature Gauge

$109.99

Quick view

A fluoroelastomer O-ring provides optimum temperature and chemical resistance.

Removing the OE balance shaft allows your engine to rev easier and provides about 18lbs of weight reduction.

The oil pan baffle ensures a good oil level is retained throughout the pan to prevent oil starvation during aggressive driving.

Tested and verified on a 450+WHP Mazdapeed3.

Balance Shaft Delete Kit for 2006-2013 DI...

$99.99

Quick view

Throttle Body, Silicone and all the Installation Hardware is included

The CorkSport Throttle Body offers increased flow and performance without compromising OE fitment and drivability.

The increased opening size has been maximized within the OE bolt pattern to optimize flow.

Flat face throttle plate improves flow and retains all the strength of OE.

OE Fit and Finish helps the CS Throttle Blend In

The CorkSport Intake Manifold works great in tandem with the CS Throttle Body.

Flowbench Testing shows a 33% improvement in peak flow capacity

GT3582R Testing show improved spool and is to high range power increases

Performance Throttle Body for 2006-2013 D...

$329.99

Quick view

Easily remove the injectors from your Mazdaspeed with the CorkSport Injector Puller Tool.

The tool head was designed specifically for DISI MZR injectors and slides on for a precise removal that won’t damage the injectors.

By utilizing a slide hammer design, the Mazdaspeed injectors can be easily removed.

Using the CorkSport Injector Puller is a snap once you access the injectors.

Fuel Injector Puller for 2006-2013 DISI M...

$39.99

Quick view

VersaTuner License & Versalink Cable

VersaTuner Mazda and Mazdaspeed ECU Tunin...

$549.99

Quick view

Manufactured from A356-T6 aluminum and post machined for OE fitment

All the necessary hardware is installed on the DISI-MZR intake manifold

Integrated methanol ports are machined into each runner of the CorkSport Intake Manifold

Runner inlets are post-machined to remove any excessive slag from casting.

Engine bay packaging exceeds that of the OE design with a tighter package yet all the necessary OE mounting points

The CorkSport Intake Manifold allows for easy access to the MAP sensor and other engine accessories typically hidden

The cast aluminum finish and OE style design allows the CorkSport Intake Manifold to blend into the engine

2007-2013 Mazdaspeed 3 & 6 Intake Manifold

$599.99

Quick view

Easy to use design allows the front and top to open to gain access to the battery and ECU

The 51r battery is secured with a singe aluminum bracket and integrated mounting

The CS 51r battery box is designed to work with all styles of IC piping and large intakes

Hood clearance is not an issue with the CS battery box

The CS 51r battery box encloses the battery, wiring and ECU for a clean look

2007-2013 Mazdaspeed 3 51r Battery Box

$199.99

Quick view

← Prev

1 2 3 4 5 6 7 8

Next →