Home/New Products

New Products

Featuring the latest and greatest that CorkSport has to offer for the Mazda and Mazdaspeed enthusiast! These are the latest releases of parts for your Mazda and Mazdaspeed listed newest items on top.

Designed specifically for the turbocharged 2.5L SkyActiv.

Improve power and sound in as little as 30 minutes.

Open up the poor flowing OEM intake system and let your turbo breathe

Laser cut and formed bracket supports the CS SRI in the engine bay

4-ply reinforced silicone removes the OE intake elbow for a smooth flow design.

Custom laser-cut silicone & precision laser cut bracket ensure a perfect fit.

Precision billet aluminum MAF housing guarantees no air leaks or CELs.

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9 - S...

$189.99

Quick view

The CS vacuum block helps clean up your Mazda engine bay.

Easily connect a boost gauge or methanol system without the need for tees

Precision machined billet aluminum is anodized for a long lasting finish that looks great

Seven 1/8" NPT threaded ports offer use with a variety of fittings

Simplify your vacuum and boost sources into one location

Small size and end mounting location gives tons of freedom for install location

Vacuum/Boost Distribution Block

$49.99

Quick view

Lightweight and strong design improves handling and driver feedback in your Mazda 6

2018+ Mazda 6 2.5L Turbo - Front Strut To...

$179.99

Quick view

The CST6 includes a free MAP sensor for your Mazdaspeed 3, 6, or Cx7

Stock flange Mazdaspeed 3 power record holder

Billet compressor wheel with the latest tech for quick response and airflow for your Mazdaspeed

Balanced rotating assembly for durability

Stock Mazdaspeed 3 and 6 downpipe bolt pattern

The stock flange Mazdaspeed power dyno pull

Save 11%

CST6 Turbo Upgrade - 2006-2013 DISI MZR

$1,499.99 $1,334.99

Quick view

A complete intercooler upgrade kit for your Mazda 6

Cast endtanks and think runners provide a durable and high performance intercooler system

Keep your boost temps down with the CorkSport Performance Intercooler Upgrade

Power gains from intercooler upgrade alone. No tuning changes!

4-ply silicone and your color choice of T-bolt clamps

Front Mount Intercooler Upgrade for 18+ M...

$499.99

Quick view

A conservative drop of 1 inch lower in the front and 0.75 inches lower in the rear.

Approximately 25% stiffer in the front and 45% stiffer in the rear gives great handling without sacrificing ride quality.

Extra spring stiffness in the rear reduces understeer and body roll on your 2018 Mazda 6.

Wake up your new Mazda 6’s handling with the CorkSport Performance Lowering Springs.

• Natural frequency analysis of the suspension ensures a comfortable, yet sporty ride.

2018+ Mazda 6 Turbo 2.5L - Sport Lowering...

$249.99

Quick view

Help your turbo breathe easier with the CorkSport Intercooler Piping Upgrade.

Performance piping design gets boost to the intercooler as fast as possible.

Large diameter cold pipe means better throttle response and less boost lag.

Combine the intercooler and piping for the best upgrade for you SkyActiv Turbo.

Intercooler Piping Upgrade | 2018+ Mazda ...

$299.99

Quick view

Open up your Mazda 6 Turbo with the CorkSport Cat Back Exhaust.

High flowing resonators remove drone and other unwanted noise without affecting performance.

Description: Gain some power and much needed noise from your SkyActiv Turbo.

Retain the OEM oxygen sensor for no CELs and no tuning required.

Polished 80mm piping looks great and livens up your Mazda 6.

Save 9%

2018+ Mazda 6 2.5L Turbo Cat Back Exhaust

$1,099.99 $999.99

Quick view

Switch to an external wastegate on your CST4 and CST5 using the CorkSport EWG housing.

0.82 A/R turbine housing offers large swallowing capacity for greater peak exhaust flow.

Specially designed turbine housing and supplied EWG elbow give flexibility for EWG fitment.

Optimum boost control, easy wastegate spring swaps, and quick servicing with an EWG setup.

Optional dump tube eliminates the need for fabrication during your EWG install.

EWG Upgrade Kit - CST4 & CST5 Turbo

$399.99

Quick view

Stock flange fitment, boost by 3600rpm and power to 7500...the CST5 is the turbo for your Speed

500whp+ and all the power on under the curve

500whp+ and all the power on under the curve for your Speed3

Pair the CST5 with a CS EGR Delete kit for improved clearance with your Mazdaspeed 3 3.5” intake

Efficient 11-blade billet compressor wheel delivers fast response and power under the curve to pull your speed 3 out of the hole.

High flow 9-blade turbine wheel reduces weight for fast response and low RPM spool from your DISI powered Mazdaspeed

The easiest 500whp option today with functional IWG setup for your Mazdaspeed.

CST5 Turbo Upgrade - 2006-2013 DISI MZR

$1,299.99

Quick view

Polished 80mm piping looks great for years to come.

Wake up your 2014-2018 Mazda 3 with the CorkSport 80mm Cat Back Exhaust.

Plan ahead for future CorkSport mods with the 80mm exhaust upgrade.

Add some much needed volume to you SkyActiv Mazda 3. CorkSport-Performance-Exhaust-Mazda3

Mandrel bent piping and flow thru resonators offer the best in performance.

Look great and sound great with 100mm exhaust tips.

2014-2018 Mazda 3 80mm Cat-Back Exhaust

$999.99

Quick view

← Prev

1 2 3 4 5 6 7 8

Next → 2 - 11

New Products

About CorkSport

Shopping

Connect

Social links