CorkSport Built Engine

CorkSport Built Long Blocks for the 2006-2013 DISI MZR

You’ve probably seen the stellar videos posted on our news feed or heard the rumors about CorkSport building stout long blocks for our employee’s Mazdaspeeds and the company R&D Mazdapeed.  Today, we are ready to let the “cat out of the bag.”

CorkSport is building long blocks for your Mazdaspeed and here’s why it will interest you:

We have complete long-blocks ready for installation with blueprint certificates. These long-blocks are in-stock and are ready to ship. If you’d rather send us your motor, we guarantee one month or less turnaround.  

Let’s check it out:

Every engine is meticulously inspected and measured to extremely precise tolerances per our ASE certified master technicians.  Critical surfaces are measured to the 0.0005” for the pistons, bearings, and camshafts to create a tight, powerful, and reliable engine setup that you can depend on. To support this, every engine comes with a blueprint certificate to confirm all critical tolerances in your engine.

Better yet, this precision doesn’t come with at the cost of a  3-6 month wait. We intend to have these motors in stock. Even if you send us yours for a rebuild, we guarantee we will have your engine ready to ship faster than the industry standard! 

No bull pricing means you get exactly what we list out here.  

At no point will you get a call from CorkSport stating extra work or cost is needed to get your engine complete and ready for you.  We’ve all been through this; starting a build with one budget and ending with a different, much larger, budget. We hate it and we won’t let it happen to you.  

Other than the block and cylinder head themselves; all the parts going into your build are brand new, not reconditioned or re-used.  This includes genuine OEM Mazda components; Manley connecting rods and Mahle pistons, ARP fasteners (specifications depend on Dankai Build), along with CorkSport Camshafts, Injector Seals, and other supporting parts.  

Finally, what good is all this if your engine can’t get back to you safe and secure?  

We want your new built block to arrive for delivery without issue, that’s why we use heavy duty sealed plastic crates that are designed to ship engines.  This provides ample mounting and restraining of the engine block in the upright position for easy access for you. Along with that your engine ships free of charge within the lower 48 states.  Just return your good engine core in the provided crate and get the core charges refunded.  

This sounds pretty great, right?  If you’re thinking about a built engine for your Mazdaspeed, then I invite you to check on the CorkSport Dankai Engine Builds to see which version fits your goals and desires.  

-Barett @ CS

2018 CorkSport Garage Update

CorkSport's Mazda 3 guide.

CorkSport Garage

How about something a little different from the usual CS blog? I thought I would give you all a little insight into all the different Mazdas that are owned by employees. Some are daily drivers, some are full racecars, and some are…different (more on that later). So grab a cold refreshment, we’ve got quite a few cars to go through.

The Mazdaspeeds

Mazdaspeed Miata
Owner: Corey
Year/Model: 2004 Mazdaspeed Miata
Mileage: 28,800

Modifications: Full Flyin’ Miata CAI, polished stainless piping, Turbosmart recirculating bypass valve, manual boost controller, O2 signal modifier, boost gauge. Recent Mustang Dyno showed a consistent 189.9WHP.

Corey’s Comments: Purchased new to me at 17,000 miles in 2012 for my 40th birthday. The Mazdaspeed Miata had been stored for 4 years-everything was original, even the tires. This Miata came from California and had never seen rain. I keep it in the garage and it’s mainly a fair weather/weekend car except during the summer. I enjoy taking a ride in the MSM with each of my kids, but love honking the horn at people and making my son wave back…like he knows them.

2009 Red Mazdaspeed 3  GT
Owner: Luke
Year/Model: 2009 Mazdaspeed 3 GT
Mileage: 124,000

Modifications: Full bolted, built engine, CS prototype turbo, methanol injection. Too many CorkSport Parts.

Luke’s Comments: Car has been through stock turbo/stock block, CS turbo/stock block, CS turbo/built block, 35r/built block, and now CS prototype turbo/built block.  Fun fact: my girlfriend went faster in my car than I did when I first bought it.  Stock turbo went 12.8 @ 110mph in the  1320.

Owner: Daniel
Year/Model: 2007 Mazdaspeed 6
Mileage: 68,000

Modifications: Custom front license plate delete, CS Interior LED Kit, daily driver dirt.

Daniel’s Comments: Just bought the Mazdaspeed6 a few weeks ago, doing a ton of maintenance before mods. This er fleet vehicle (whatever that means). Bought it from a guy who owned it the past ~9 years. Hoping to sneak some new Mazdaspeed 6 parts into the CS catalog and feed the zoom-zoom obsession!

Owner: CorkSport (shop car)
Year/Model: 2013 Mazdaspeed 3
Mileage: 14,000

Modifications: Virtually everything in the CS catalog for MS3. Plus a few prototype parts that never made their way to the market.

Comments:  Affectionately called “Whitey”. On its 2nd built engine (we use and abuse this thing). This was one of Vincent’s first projects when he arrived at CS: rebuild Whitey’s engine. He just got done rebuilding it for the second time and is now breaking it in.

Owner: Barett
Year/Model: 2009 Mazdaspeed 3
Mileage: ~135,000

Modifications: Manley internals, L19 head studs, CS cams, bowl work & porting, all the bolt-ons, 28gph methanol injection, prototype CS turbo, 330mm BBK, other suspension bits.

Barett’s Comments: More info on the engine build here. Made ~465whp at the 2017 CS dyno day. My car hates me and is a constant work in progress. (Check out all the updates for Barett’s Mazdaspeed 3)

Owner: Brett
Year/Model: 2013 MazdaspeeD 3
Mileage: 37,000

Modifications: Full CS bolt-ons, big turbo, meth injection, making 430whp 385ft-lbs. BC coilovers w/ custom rated Swift springs, BMSPEC front splitter, Varis rear diffuser, custom side skirt extensions, Volk TE37SL: front 18×11 rear 18×10, paint matched 240Z flares, 330mm Mazdaspeed3 Big Brake Kit.

Brett’s Comments:  I’ve had the Mazdaspeed3 for about 4 years now. It has every CS bolt on in the catalog. Helps that I work here now. This MS3 makes ~430 WHP, and is a stock block for now; built block soon to come. I take more pictures of this car than I do anything else. 

The GEN 3’s

CorkSport's Mazda 3 guide.
Ready to mod your Mazda 3? You will be after you read this!
Owner: Jennifer
Year/Model: 2014 Mazda 3 2.5L Hatch
Mileage: 100,000

Modifications: Most of the CS catalog for GEN3: Intake, exhaust, lowering springs, adjustable struts, rear sway bar, aluminum skid tray, etc., GEN2 MS3 wheels, big CS livery.

Jennifer’s Comments: The car has been used for the majority of the Mazda3 research and design at CS. This Mazda 3 is daily driven ~80miles each day to torture test CorkSport parts, it helps that the commute to my house is that far round trip. Basically, my daily drive is a perfect example of “running up a hill both ways” for this Mazda 3.  

(Left)

Owner: Collin
Year/Model: 2016 Mazda 6
Mileage: 40,000

Modifications: CS RSB, prototype CS Front Strut Bar, CS RMM, prototype CS performance header, CS license plate kit.

Collin’s Comments: Aside from the performance parts available at CS, I chose this car due to the extra ~30HP compared to most commuter cars. I still get 42MPG on my freeway commute. This is my first New Car I bought myself and I have loved learning how to modify on it. 

(Right)

Owner: Rich
Year/Model: 2014 Mazda 6 GT

Modifications: CS lowe\ring springs/struts, CS front camber plates, CS rear camber arms, CS SRI, CS catback, CS radio control knob, CS license plate kit, 25mm wheel spacers

Rich’s Comments: I drove around the same B2300 for many years while we built CorkSport from the ground up. I finally decided to treat myself and picked this Mazda6 up in 2014. Big shift, and I’ve loved having the luxuries of this Mazda 6

Owner: Derrick
Year/Model: 2014 Mazda 3 2.5L Sedan

Modifications: Caged, stripped, CS SRI, straight pipe to CS axleback, bunch of custom adjustable suspension, Big Brake Kit (sometimes), custom racetrack-modified bodywork.

Derrick’s Comments: This Mazda3 could not be sold as a road legal car, so I don’t drive it on the road. There are a TON of track hours on this Mazda 3 and all of it’s modifications. We basically TRY to break our test parts before we let them hit the market, which is good for me because I love to go fast.

Owner: CorkSport (shop car)
Year/Model: 2018 Mazda 3 2.5L Hatch
Mileage: 2900

Modifications: CS struts, CS lowering springs, CS camber plates, CS RMM.

Comments: Mainly stock so far, big things to come to the “CBR” (CorkSport Branded Ride). Brett, who has been dailying the CBR, somehow only is getting 23mpg. Expect more parts for facelifted GEN3’s with the CBR’s arrival.

The Others

Just because you may not have seen much about them and they don’t get their own category does not mean they’re not special. For me, some of the most interesting cars are down below.

Owner: CorkSport (shop truck)
Year/Model: 1995 Mazda B2300
Mileage: 160,000

Modifications: Sweet stickers for extra HP, tire shop wheels, custom faded paint

Comments: Vincent used to own this truck before selling it to be the “new” CS shop truck. He notes that it was involved in 3 accidents, each time the insurance company did not total the truck, leaving Vincent with more money than he spent to buy the truck. No power steering provides an arm workout for those lucky enough to drive this beast.

Owner: Derrick
Year/Model: 2016 Miata Launch Edition.
Mileage: 24,000

Modifications: Full CorkSport ND Miata catalogCS cold air intake, CS catback exhaust, CS front sway bar, rear sway bar, CS lowering springs, CS adjustable front end links, VersaTune CS parts tune, CS short shifter – Sparco Drift wheels, Bridgestone Blizzak run flats

Derrick’s Comments: The ND is an interesting car for me as being a lifelong Mazda enthusiast I had never owned a Miata before.  When the ND was announced I had already converted the Mazda 2 into a B-Spec car so I stopped street driving it and went back to my Rx7 turbo as my daily driver so I had gotten used to driving a car with “issues” again.  When I got into the ND for the first time and drove it home it was very surreal expecting some weird sound or smelling hydrocarbons (the Rx7 is old and catless) and the car handled incredible right out of the box.  Of course that lasted all of 3 months until we have Kenton Koch behind the wheel helping us out with the suspension development.  It is one of those cars that I warn people, if you drive it you will want to buy one.

Owner: Vincent
Year/Model: 2010 Mazda RX-8 R3
Mileage: 60,000 (original engine, no issues)

Modifications: Turbo XS exhaust, K&N high flow filter, custom VersaTune tune, DBA club spec rotors, Hawk Street/Race pads, Goodridge stainless steel brake lines.

Vincent’s Comments: I had been wanting a 2nd gen RX-8 since high school. This thing revs out to 9400RPM and is super fun to drive. Just recently sold (hi Aaron) but too good to not include in this blog.

Owner: Derrick
Year/Model: 1993 Spec Miata
Mileage: “Lots and lots” (this car has run 25hours of Thunderhill a few times on top of all its other racing)

Modifications: Spec Miata Bilstein shock package, Eibach swaybars, illegal plunge cut cylinder head (lookup spec Miata plunge gate 2014), GLoc brakes, 949 6ul Spec Miata wheels, AIM dash & datalog system, ESR drive side drop floor, Really big radiator.

Derrick’s Comments: I took the advice of all the spec miata people and bought a built car so I didn’t have to spend 6 months building one myself.  The local car was raced for a long time in the northwest and was a front running car before it was parked for a few years.  I picked it up for ~6k with some extra spares and was immediately able to get on the track and go racing after the installation of the drop floor and new seatbelts.  The big question I have people ask me is why did you get a SM?  The real answer is the level of drivers in the class.  At any sanctioned race event weekend there are always SM and someone to race against and I have personally known several drivers go into SM a novice and come out the other side in pro racing.  To win at SM you have to have your shit together.  To be the best you need to compete against and beat the best so here I am.

Owner: Barett
Model: Mazda B2600i
Mileage: ?

Modifications: Solid axle swap with Toyota running gear, 4.88:1 axle gears, rear locker, 3 feet of articulation, 8000lb winch, high bolstered seats, 35×14.5R15 Super Swamper Bogger Tires, “lots of f*ckery fabrication.”

Barett’s Comments: This was my first real vehicle, and it taught me lots about owning a vehicle, modifying a vehicle and I have more memories with this beast than I can come up with right now. I beat the SH*T out of this truck and it’s always put away wet.

 Owner: Rich
Model: 1988 Mazda Rx- CONVERTIBLE

Modifications: Turbo engine swap, Apexi Power FC, CS Border Style body kit, CS front mount intercooler, CS turbo back exhaust, many other mods.

Rich’s Comments: The Rx-7 is kept in the garage and it’s mainly a fair weather/weekend car except during the summer. I take it out for special occasions or to just show off every once in a while. It’s a nostalgia piece for me. 

Not Pictured:

  • 2016 Mazda 3 Sedan. Derrick’s 2nd racecar. Caged, stripped, 2.0L AT converted to 2.5L MT.
  • Mazda RX-7 FC. Owned by Derrick.
  • NA Mazda Miata. Parts car for Derrick’s Spec Miata
  • Mazda 5. Derrick’s wife’s car.
  • Mazda CX7. Kelly’s daily driver.

For those keeping score, that’s 22 Mazdas in the CorkSport garage. The cars have come and gone over the years but one thing will always stay true: our cars will be fun to drive because they are Mazdas. Here’s to more Mazdas finding their way into the CS (and your) garage.

Oh and if you have any questions on the above cars, please let us know down below, we’ll be sure to pass on your question to the car’s owner.

-Daniel

Connect with us

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

Servicing Your CorkSport Oil Catch Can for Winter

Servicing your OCC

   We at CorkSport hope all of you are staying safe, warm, and happy during this winter season.  As the weather changes, so do components in your Mazda.  Making sure to take the time to properly do some maintenance on your Mazda will go a long way. Whether you own a Mazdaspeed or an NA Mazda, I wanted to make sure and take a little bit of time for you guys to explain how to service your CorkSport oil catch can, and why that is important as the weather starts to become colder.

 

 

Why Use an Oil Catch Can

Having an oil catch can on your Mazda is always a good idea.  Over time, the engines will start to wear down allowing oil to blow by the piston rings.  Due to this, you can have oil pass back into your intake causing unwanted smoke to come out of the tailpipe.  Keeping that oil from contaminating the engine will result in a much cleaner engine over time.  

Also, having an OCC on your car is a good way to tell if you have internal engine issues, or if you have a bad PCV.  We recommend draining your catch can every oil change.  If you see a bunch of oil in your catch can, then you know, it’s time to start looking into why the can is filling up with oil.

 

 

Servicing Your Catch Can for Winter

     Making sure to catch all the nasty vapors an engine puts off is an important thing to do in regards to longevity of the engine.  However, making sure the CorkSport OCC is working properly is just as important.  The reason why this is important is that you want to make sure your oil catch can continue to filter out the nasty vapors otherwise you will dirty up your engine faster than you want.  However, it is very easy to maintain a good working oil catch can.  

Follow these couple steps below on getting that catch can back up to a new status:
  1. Remove top dipstick
  2. Remove bottom plug
  3. Spray Brakleen through dipstick hole
  4. Allow draining
  5. Repeat a couple of times to ensure your can is clean
  6. Check all rubber hoses.  Make sure none of them are cracked or look dry

 


 

Why You Should Service Your Oil Catch Can

   Even though oil/gas takes really cold temperatures to freeze, water vapors still make it into the system which most definitely can freeze.  The last thing you want is to have your oil catch can no longer able to catch the nasty vapors the engine puts off.  

 

If you have a frozen can, those will pass by the baffle and make it into the intake.  Make sure to drain that OCC, and continue to drain it every time you change your oil.  As long as you do that, there should be no problem with having your catch can freeze, or getting too dirty.  

 

Be sure to check in with us and see other tips and tricks for your Mazda.

Keep on driving Mazda fam!

Cheers,

Luke

CorkSport Balance Shaft Delete Kit for 2006-2013 DISI MZR

Looking to add some Extra Excitement to your Mazdaspeed?

What if we told you could add extra engine protection at the same time? Introducing the new CorkSport Balance Shaft Delete Kit for 2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, and 2007-2012 Mazda CX-7. It contains all the parts you need to safely remove the OE balance shaft from your MZR DISI engine and give it the extra rev-happiness that it needs.

The OE balance shaft is an 18-pound lump that lives in your oil pan to help balance out the natural vibration and harshness that are inherently present with an inline four-cylinder engine. It does this by connecting to a large gear on your crankshaft and using rotating mass to help cancel out the vibrations from the engine. By removing the balance shaft, your engine has less weight to turn and thus, can change RPM more rapidly. If this sounds familiar, it’s because lightweight flywheels do the same thing; remove some of the rotating mass of the engine to gain a faster revving engine and even a few bonus horsepower.

The OE balance shaft needs an oil supply to ensure that it stays well lubricated and does not lock up. The CorkSport BSD Kit uses a stainless steel plug and O-ring to seal this oil passage. The O-ring is not enough to seal and keep the plug in place, however, it is locked down by a securing plate which gets attached using one of the OE balance shaft mounting holes. We chose stainless for its strength over aluminum. By doing so allowed us to create a lower profile plug with a thicker O-ring for better sealing. We were also very careful to choose an O-ring that is safe for all types of oil and safe up to 400°F.

But you may be asking where does the engine protection come from?

Since the OE balance shaft lives in the oil pan, it takes up some volume that could otherwise be used for oil capacity. This means roughly a quart of extra oil can be used once the BSD kit is installed. Also, the CorkSport Balance Shaft Delete Kit comes with an oil pan baffle to help control your oil’s movement during aggressive driving.

While rapidly changing direction or during a long sweeper at high speed, the oil in your oil pan can move around a surprising amount. If the wrong set of circumstances happen, your engine can be starved of oil, which can easily damage vital engine components. The CorkSport Oil Baffle controls your oil’s movement, ensuring that your engine will have a good supply of oil no matter the driving situation.

We again choose stainless over aluminum for the oil baffle, so that it is rigid enough to control your oil and prevent any vibrations or rattles while your engine is running. The oil baffle is made from two laser cut pieces that are then attached using stainless steel rivets to eliminate any risk of corrosion or improper hole alignment.

Note: the CS BSD Kit comes fully assembled and ready for installation.

Since the CorkSport BSD Kit removes a stock component designed to make the car more comfortable, it will naturally have an increase in noise and vibration coming from the engine compartment. As such, we cannot in good conscience recommend this mod to everyone. That does not mean it is unbearable though, Barett at CorkSport still daily drives his fully mounted Mazdaspeed3 with a CS BSD Kit installed.

If you are looking for the next mod to get some more excitement from your Mazdaspeed, look no further than the CorkSport Balance Shaft Delete Kit. After all, how many mods come with some extra engine health as well?

New Year, New Gains

As the New Year rolls around, most people are looking for a change for the better in their lives.

At CorkSport we think one of the best changes you can make is more power for your Mazdaspeed. We have all the parts you need to liven up your Mazdaspeed3 or Mazdaspeed6 in the New Year.

Safety First

One of the first things to consider when modifying your Speed is the health of its engine. Performing maintenance is very important but it only gets you so far. When adding power, one of the first modifications on your list should be the CorkSport Max Flow Fuel Pump Internals.

These pump internals allow you to maximize your stock fuel system for optimum power capabilities and safer than OE A/R ratios. This means you can add the power you want and have peace of mind that your engine will get the fuel it needs.

Put the Power Down

Like the CS fuel pump internals, the CorkSport Stage 2 RMM for Mazdaspeed 3 will not directly increase the power levels of your car; however, it helps you put all that hard-earned power down. By decreasing the amount the engine can rotate, the Rear Motor Mount allows for reduced wheel hop and torque steer while providing faster throttle response and crisper shift feel.

Even we are surprised how much this engine mount changes how a Mazdaspeed 3 feels. Don’t worry Mazdaspeed 6 guys and gals, we have an RMM for you too.

Improving Airflow

Engines in an extremely simple sense are air pumps; so the faster you can get air in and out of the system, the better. That being said, some of the simplest and easiest power gains you can get from your Mazdaspeed are from upgrading the intake and exhaust. We have seen peak gains of 25ft-lbs and 33WHP from only the CorkSport Stage 2 Intake and a CorkSport Racepipe.

Checkout the dyno sheet below.

Power and torque levels will be further increased if you install a full CorkSport Turbo Back Exhaust instead of just the race pipe section.

The catback exhaust section has proven to gain up to 14WHP while the downpipe section alone has proven to gain up to 21WHP. In the dyno graph below, the downpipe car had a CorkSport Intake installed at the same time as the downpipe (hence the 50hp gain).

If that wasn’t enough flow for you, we also offer 3” and 3.5” intakes for even more airflow into your turbo. Keep in mind though, once you get into those you will need to use a new tune to ensure your car runs optimally. But check out the extra flow you get!

Turbo Upgrade

The CorkSport Drop-In Turbo is a fantastic upgrade to the stock K04 turbo that allows your car to make more power on an equivalent boost pressure. It will work with any mods you already had on your OE Mazdaspeed turbo as the CS turbo is truly a drop in upgrade. With supplemental tuning, fueling, and supporting parts, you can push your Speed to its limits.

Stay Up-to-date with CorkSport   


The Next Level

CorkSport also manufactures parts that can take your Speed beyond the parts discussed above. A short list of the parts with the best power gains can be seen below:

  • CorkSport Intake Manifold: A higher flowing IM can support much more power than the relatively restrictive OE unit. Best when paired with a larger throttle body.
  • CorkSport Camshafts: Replacement cams with extra lift to provide increased power and torque across the entire RPM range.

  • Bigger CorkSport Turbo? Yes, there is one in development. See this blog post for details.

No matter what your goals are for this year, CorkSport is here to help you achieve them. Whether you just picked up a Mazdaspeed and are unsure where to start, or have been driving one for years and want the excitement you once had back, CorkSport has a part for you.

Daniel

CorkSport Engineer

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required