Mazdaspeed 6 Rear Motor Mount by CorkSport

Get improved handling and shifting while maintaining a comfortable ride with the CorkSport Rear Motor Mount for Mazdaspeed 6. Designed as solid single piece, the CorkSport Mazdaspeed 6 Rear Motor Mount maintains OEM fitment while adding a large urethane thrust surface for added stiffness and improved driver responsiveness.

Read The BlogDouble Product Release! CorkSport Mazdaspeed 3/Mazda 3 and Mazdaspeed 6 Rear Motor Mount

The CorkSport Advantage:

Large Thrust Surface for reduced vibration versus other aftermarket motor mounts.
Black Anodized with Zinc Coated Sleeves for a durable, lasting finish and long life.
70 Durometer Urethane Get a stiffer ride without all the NVH (noise, vibration and harshness) associated with stiffer grade urethane.
OEM Fitment Designed as a direct OEM replacement for a worry free install
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

mazdaspeed 6 engine mount installation instructions

Like Stephen (@reviews) said: this thing is a unicorn. No more cluncky noises, and MUCH better handling. I tend to be skeptical at all parts but this one is just golden.

Love it! Great value. Tip: maybe add a front left/right replacement as well? Bought it somewhere else and makes ALL the difference also.

Stino01/24/2023, 06:21 AM

This thing is a unicorn. It noticeably improves shifting feel and drivetrain backlash while literally feeling identical to OEM from a noise, vibration and harshness standpoint. As an added bonus, it eliminated the constant creaking and squawking that was emanating from my OEM mount.

Installation is really pretty easy. A breaker bar helps a lot with loosening the bolts and you WILL need to twist the bottom of the motor toward the back of the car to complete the install. I was able to do this without help by wedging a breaker bar into a suitable nook/cranny on the transmission and pushing with one hand and inserting the motor mount bolt with the other.

Well done, CorkSport!

Stephen Chupack08/25/2017, 04:53 PM

MUST HAVE IN YOUR SPEED6. MINE DOES NOT VIBRATE AT ALL BUT MY SHIFTS ARE SO MUCH SMOOTHER AND I FEEL MORE CONNECTED TO THE CAR. CORKSPORT RMM IS THE ONLY RMM YOU SHOULD GET. ALSO THE CUSTOMER SERVICE WAS GREAT, THEY RESPONDED RIGHT AWAY AND HELPED ANSWER SOME QUESTIONS.

Gowkaran Mc Coon07/03/2017, 04:30 PM

Ordered this RMM. They accidentally put the same sleeve on both ends of the RMM (the size of the bolts are different sizes so one bolt could not pass through the sleeve). Called/emailed Corksport and they sent the correct sleeve. Waited a little longer than I wanted to but the issue was resolved and just like all of the other comments, shifting is smooth and less vibration especially when you're in second gear and trying to stop at a stop sign without actually stopping. Great part from a great company!

Brent Purcell06/27/2016, 10:23 AM

What a difference this made and on a low mileage car no less. Completely changed the way shifting feels for the better. My factory mount looked ok but it was definitely the issue

Chris P05/08/2016, 12:15 PM

Had this installed earlier today by Freeway Mazda, which was straightforward. Coming from a jbr 80a this seems to be broken in already with less than 100km on it, which is a welcome change in the nvh dept. Odd as it is, the clutch seems to release easier and smoother in first. Not much else to say at this time other than it was easy to order, delivered timely and great engineering as it's done exactly what I wanted it to.

Dave B11/07/2015, 12:26 AM

Wow... Just WOW... Just got back from my test driving in my MS6 after installing this RMM and I am more than suprises! I figured the shifting and shift shot/rubber band effect would improve a good amount but not this much!! Well done CorkSport! Can't wait for my race pipe now!

Eric Wooton06/10/2015, 03:10 PM

Just by looking at the old rmm and the cs one you can tell there will be a difference. Installation was easy, using a floor jack will help you with install. The final result I was amazed with it on my ms6. Strongly suggested as one of your first upgrades.

Ryan Schmid03/26/2015, 08:33 PM

Great product! I love the way the car feels when shifting now. Much easier to move through the gears smoothly even under hard acceleration. The NVH increase is nonexistent in my car, '06 MS6. Super easy installation! Having access to a lift makes this install trivial at best but even using jack stands this would have been a piece of cake.

Sean Rivers01/25/2014, 09:53 PM

Easy to install but still a two person job. Support the engine when you unbolt it or it may shift out of place. After install i can feel the difference, no more clunk when i jump on the gas!

Josh Majo11/12/2013, 05:38 PM

← Prev

12

Next →

Write a review

Servirá para el mazda 6 gh segunda generación 2011?

Asked by Jair | 05/25/2024, 04:16 PM | 1 answer(s)

Este soporte, sirve para el mazda 6 gh 2011

Asked by Jair | 04/03/2024, 04:47 PM | 0 answer(s)

Can I safely replace the original mount with this one without needing a crane for my engine? I wont fall down? I'm just really careful. Thank you

Asked by Stijn | 12/15/2022, 12:25 PM | 1 answer(s)

This looks an awful lot like it would a 2007-9 cx7 2.3T with the 6speed AT, is there any way to test this?

Asked by John | 05/09/2021, 11:24 AM | 1 answer(s)

Will this fit a 2005 Mazda6 V6 with a 6 speed A/T? This is the OEM mount https://www.onlinemazdaparts.com/p/Mazda_2005_6-S-Sedan-30L-Duratec-V6-AT/Engine-Support-Rod-Rear/48695328/GK2C39040C.html

Asked by Emily | 01/18/2020, 07:21 AM | 1 answer(s)

Will this fit a 2007 mazda 6 Mps? Not sure if mazdaspeed 6 and mps are the same.

Asked by Henke | 11/23/2018, 12:23 AM | 1 answer(s)

Will this fit a 2008 Mazda 6i 2.3 l with automatic transmission?

Asked by Allan D Butler | 11/01/2018, 07:08 AM | 1 answer(s)

Could this be used as a replacement part for the GH OEM mount - GS1G-39-040A ?

Asked by Lucas | 01/02/2018, 06:25 PM | 1 answer(s)

Could this be used as a replacement part for the GH OEM mount - GS1G-39-040A ?

Asked by Lucas Farr | 01/02/2018, 06:26 PM | 1 answer(s)

Is this a replace part for OEM GJ6A-39-040?

Asked by Rafael | 10/21/2016, 10:57 AM | 1 answer(s)

Would this rmm be sufficient to handle a BT build being that it's only 70 duro? I really like the one I had for my speed3 but I'm not sure about this being enough for my speed6....

Asked by Casey Eberhard | 06/02/2015, 09:08 AM | 0 answer(s)