CorkSport Mazda Performance
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Get rates

2006-2007 Mazdaspeed 6 Stage II Power Series Short Ram Intake

62 reviewsWrite a review
 
Price: $279.99
Price in points: What are Points?280 points
Axl-6-118-13130
+−
Add to wish list


Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install Mazdapseed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:
 
  • Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
  • Choose from 108 different color combinations to customize the look of your SRI
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Replacement Air Filter is: Available Here
  • Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support
    •   

Technical DocumentsVideo Clips


Install time                  3/5 Difficulty               2 year warranty       No CEL




This was an amazing upgrade, the pull is significantly better through all gears, the sound is awesome and instead of just dead/low power after 5500 rpm, I now actually get a good pull up to 6000 rpm, maybe a little higher! Worth every cent, and the install was pretty simple. Definitely should be one of your first mods with your Mazdaspeed 6, great power, reasonable price! A+++
Tommy G07/07/2017, 12:27 PM
OMG!!!



I ain't no spanner monkey and always shy away from getting my hands dirty !

So after looking at the directions how to fit this on the corksport website i thought hmmm, how long will it take and how many nuts will i lose?

With only 2 hours of daylight i thought I'd crack on and give it a shot.

2& a half hours of f in and blinding later i fitted it!

Managed to lose 1 screw.

Took the car for a run and i was blown away by the pick up from 3rd to 6th gear.

The roar from the filter let's me know this car is ready for action.

I was sceptical about the claims of extra bhp but, let me tell you, if there is any mod you do..This is it!!

I will buy more cs products as the proof is most certainly in the pudding!

Jonna Pal01/18/2015, 12:00 PM
Best and easiest addition to enhance performance. Sounds great when you tap in to the turbo, definitely notice a power increase! I did have to drill a new hole in the battery tray because it was rubbing the TIP and removing the paint.
Ryan Kelly12/11/2014, 10:41 AM
The install time was about 2 hours for me. I kept trying to make the wiring harness that goes over the TIP fit well. I gave up on that. I love that it is metal and has a metal fitting for the boost solenoid to the TIP. I did have some trouble installing the air flow sensor, but that was because the holes weren't drilled evenly from Mazda. The intake bit is a bit floppy. I'm trying to make a PVC support for it.



It sounds so good! I hold more boost! I've had it in for just over a week.
Evan Defibaugh05/12/2014, 08:04 PM
Let me say first off it came in, in 2 days and the instructions ( if u don't know how) were supper easy to follow and the results were um well more than expected!!!!!! My ms6 sounds awesome!!!!!! Must buy if you just starting to mod
Erik M04/14/2014, 08:32 PM
Bought this as a replacement for my worn out Mazdaspeed 6 In-Fender Cold Air Intake. This intake is by far the best out there for the MS6 as it replaces key items such as the turbo inlet tube, which gives even throttle throughout the RPM band. Easy to install as I bought the all black kit to keep my engine bay looking OEM. Also thank you Corksport for the superior customer service, called me to let me know when the item shipped! Thank you Corksport for the superior items and great customer service!
Jordan Shrum03/12/2014, 09:13 AM
This was fairly easy to install. I had already taken out the intake resonator so I didn't have to do that during the installation. Just make sure that when you are pulling the hoses off of the connections you are careful because they break easily. The whooshing sound is wonderful!! The power wasn't too noticeable around town, but on the freeway it was very noticeable! Absolutely recommended!!
Shawn Thompson01/22/2014, 03:29 PM
Installed this about 4-5 months ago on my '06 MS6 and I love it! Great sound under boost and the look under the hood is perfect for me. I went all black for more of a "stealth" look and couldn't be happier. I would highly recommend this SRI to any MS6 owner. Installation instructions were easy to follow and all in all was an easy to moderate install. I will definitely be purchasing more Corksport products for my MS6 in the future!
Sean Rivers01/15/2014, 07:40 AM
This intake is an amazing first modification. I have been running it in my SPEED6 for a year/12000 miles. It unlocks the noise of the turbo spooling and gives you a bit more noticeable power without an accessport or a tune. The instructions were clear and well thought out. Watch out for the factory boost control solenoid nipples on high mileage cars because they become brittle and can easily break. Overall I absolutely love the product. Thank you Corksport!
Christopher Mazzei12/30/2013, 05:14 PM
Amazing kit. Really awesome finish and fitment was perfect for me.



Turbo spool sound is really nice. Linked with the Forge BPV, I couldnt be happier.
Sam08/24/2013, 04:52 AM
← Prev
1234567
Next →
Write a review

Can i run this intake with a cst4/350whp down the road?

Asked by Zac Barker | 07/11/2022, 03:24 AM | 1 answer(s)

is there any 3.5 intake for ms6?

Asked by vireak | 10/15/2021, 03:18 AM | 1 answer(s)

Will this fit interchangably on the Mazdaspeed 3 gen2?

Asked by Johnas | 01/28/2020, 05:05 AM | 1 answer(s)

Will this replace both the factory TIP and Intake?

Asked by Jake | 12/01/2017, 08:24 AM | 1 answer(s)

What is the diameter of this intake and what is the diameter of air filter mouth is required?

Asked by David | 06/21/2016, 05:07 PM | 1 answer(s)

If this is my one and only modification, will I be OK using the stock fuel pump or should I upgrade?

Asked by Daniel | 11/02/2015, 04:08 AM | 1 answer(s)

Is this a 3.5" or 3" MAF housing?

Asked by Dan | 10/28/2015, 04:54 PM | 1 answer(s)

Would I need a Tune if I install this?

Asked by Brandon | 06/18/2015, 03:15 PM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.


Recommended Products Recommended Products

2023 Racepipe T-Shirt - CorkSport 25th Ye...
$24.99
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99
2019+ Mazda 3 Rear Wiper Delete
$39.99
Mazdaspeed Boost Control Solenoid
$129.99
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99
CorkSport 7th Gear
$99.99