CorkSport is proud to introduce the first and only performance transmission motor mount for GEN3 Mazdas. It’s a simple upgrade that can really change how shifting feels in your 2014-2018 Mazda 3, 2014-2017 Mazda 6, or 2013-2018 Mazda CX-5. We saw how an upgraded mount can drastically affect the characteristics of your car with our Mazda 3/6/CX-5 RMM and wanted to take the next step in getting the best driver feel you can out of your car.
We followed a design similar to the OE mount to ensure proper fitment and function for all engine and transmission options. Whether you have a 2.0L Mazda 3 Auto, a 2.5L Mazda 6 Manual, or anything in between, the CorkSport TMM will bolt right in with no issues. We even retained the OE battery tray mounting location to ensure the battery stays stationary. Don’t be mistaken though, the CorkSport Mazda Transmission Motor Mount is a completely different mount than OE.
Stay Up-to-date with CorkSport
The OE mount uses relatively soft rubber to ensure the least amount of noise and vibration makes its way into the cabin. It also allows the engine and transaxle to move around a surprising amount while accelerating, decelerating, or changing gears. By using 70A durometer polyurethane, the CorkSport TMM helps to lock down the engine and transaxle for better throttle response, less wheel hop, and much-improved gear changes. When we first installed a prototype TMM in the CorkSport Mazda 3 racecar, we immediately noticed the lack of delay and slop coming from the transmission when setting off from a stop and changing gears.
Don’t think we forgot about vibration and noise though. The size and stiffness of the polyurethane pucks were chosen to help minimize the adverse effects of stiffer mounts. That being said, there is still some added vibration and noise, most noticeable in automatic cars, when lugging the engine, and/or when using the A/C system. Once you are up and cruising on the highway, however, the added NVH is virtually eliminated solely by road noise.
Much like the CorkSport RMM, the TMM uses billet aluminum for the main body of the mount. After machining, it is anodized black for durability and finished off with a laser etched CS logo. A zinc-coated steel sleeve is used through the center of the bushings so you can be sure that your mount is tightened to spec. Finally, stainless steel is used for the hardware, angled mounting plate, and side washers. All of these materials were selected for their strength and corrosion resistance so that your CorkSport Mazda TMM will stand the test of time.
The CorkSport Mazda 3, Mazda 6, and CX-5 Transmission Motor Mount will liven up your Mazda GEN 3 whether you use it as a daily driver or racecar. The TMM is even better when combined with our RMM however, it works standalone perfectly fine. While not for everyone, those who are willing the sacrifice a little comfort for a boost in driver feel will love this mount.
How about something a little different from the usual CS blog? I thought I would give you all a little insight into all the different Mazdas that are owned by employees. Some are daily drivers, some are full racecars, and some are…different (more on that later). So grab a cold refreshment, we’ve got quite a few cars to go through.
Modifications: Full Flyin’ Miata CAI, polished stainless piping, Turbosmart recirculating bypass valve, manual boost controller, O2 signal modifier, boost gauge. Recent Mustang Dyno showed a consistent 189.9WHP.
Corey’s Comments: Purchased new to me at 17,000 miles in 2012 for my 40th birthday. The Mazdaspeed Miata had been stored for 4 years-everything was original, even the tires. This Miata came from California and had never seen rain. I keep it in the garage and it’s mainly a fair weather/weekend car except during the summer. I enjoy taking a ride in the MSM with each of my kids, but love honking the horn at people and making my son wave back…like he knows them.
Owner: Luke Year/Model: 2009 Mazdaspeed 3 GT Mileage: 124,000
Modifications: Full bolted, built engine, CS prototype turbo, methanol injection. Too many CorkSport Parts.
Luke’s Comments: Car has been through stock turbo/stock block, CS turbo/stock block, CS turbo/built block, 35r/built block, and now CS prototype turbo/built block. Fun fact: my girlfriend went faster in my car than I did when I first bought it. Stock turbo went 12.8 @ 110mph in the 1320.
Owner: Daniel Year/Model: 2007 Mazdaspeed 6 Mileage: 68,000
Modifications: Custom front license plate delete, CS Interior LED Kit, daily driver dirt.
Daniel’s Comments: Just bought the Mazdaspeed6 a few weeks ago, doing a ton of maintenance before mods. This er fleet vehicle (whatever that means). Bought it from a guy who owned it the past ~9 years. Hoping to sneak some new Mazdaspeed 6 parts into the CS catalog and feed the zoom-zoom obsession!
Modifications: Virtually everything in the CS catalog for MS3. Plus a few prototype parts that never made their way to the market.
Comments: Affectionately called “Whitey”. On its 2nd built engine (we use and abuse this thing). This was one of Vincent’s first projects when he arrived at CS: rebuild Whitey’s engine. He just got done rebuilding it for the second time and is now breaking it in.
Modifications: Manley internals, L19 head studs, CS cams, bowl work & porting, all the bolt-ons, 28gph methanol injection, prototype CS turbo, 330mm BBK, other suspension bits.
Barett’s Comments: More info on the engine build here. Made ~465whp at the 2017 CS dyno day. My car hates me and is a constant work in progress. (Check out all the updates for Barett’s Mazdaspeed 3)
Modifications: Full CS bolt-ons, big turbo, meth injection, making 430whp 385ft-lbs. BC coilovers w/ custom rated Swift springs, BMSPEC front splitter, Varis rear diffuser, custom side skirt extensions, Volk TE37SL: front 18×11 rear 18×10, paint matched 240Z flares, 330mm Mazdaspeed3 Big Brake Kit.
Brett’s Comments: I’ve had the Mazdaspeed3 for about 4 years now. It has every CS bolt on in the catalog. Helps that I work here now. This MS3 makes ~430 WHP, and is a stock block for now; built block soon to come. I take more pictures of this car than I do anything else.
The GEN 3’s
Ready to mod your Mazda 3? You will be after you read this!
Owner: Jennifer Year/Model: 2014 Mazda 3 2.5L Hatch Mileage: 100,000
Jennifer’s Comments: The car has been used for the majority of the Mazda3 research and design at CS. This Mazda 3 is daily driven ~80miles each day to torture test CorkSport parts, it helps that the commute to my house is that far round trip. Basically, my daily drive is a perfect example of “running up a hill both ways” for this Mazda 3.
Collin’s Comments: Aside from the performance parts available at CS, I chose this car due to the extra ~30HP compared to most commuter cars. I still get 42MPG on my freeway commute. This is my first New Car I bought myself and I have loved learning how to modify on it.
Rich’s Comments: I drove around the same B2300 for many years while we built CorkSport from the ground up. I finally decided to treat myself and picked this Mazda6 up in 2014. Big shift, and I’ve loved having the luxuries of this Mazda 6.
Owner: Derrick Year/Model: 2014 Mazda 3 2.5L Sedan
Modifications: Caged, stripped, CS SRI, straight pipe to CS axleback, bunch of custom adjustable suspension, Big Brake Kit (sometimes), custom racetrack-modified bodywork.
Derrick’s Comments: This Mazda3 could not be sold as a road legal car, so I don’t drive it on the road. There are a TON of track hours on this Mazda 3 and all of it’s modifications. We basically TRY to break our test parts before we let them hit the market, which is good for me because I love to go fast.
Comments: Mainly stock so far, big things to come to the “CBR” (CorkSport Branded Ride). Brett, who has been dailying the CBR, somehow only is getting 23mpg. Expect more parts for facelifted GEN3’s with the CBR’s arrival.
The Others
Just because you may not have seen much about them and they don’t get their own category does not mean they’re not special. For me, some of the most interesting cars are down below.
Modifications:Sweet stickers for extra HP, tire shop wheels, custom faded paint
Comments: Vincent used to own this truck before selling it to be the “new” CS shop truck. He notes that it was involved in 3 accidents, each time the insurance company did not total the truck, leaving Vincent with more money than he spent to buy the truck. No power steering provides an arm workout for those lucky enough to drive this beast.
Derrick’s Comments: The ND is an interesting car for me as being a lifelong Mazda enthusiast I had never owned a Miata before. When the ND was announced I had already converted the Mazda 2 into a B-Spec car so I stopped street driving it and went back to my Rx7 turbo as my daily driver so I had gotten used to driving a car with “issues” again. When I got into the ND for the first time and drove it home it was very surreal expecting some weird sound or smelling hydrocarbons (the Rx7 is old and catless) and the car handled incredible right out of the box. Of course that lasted all of 3 months until we have Kenton Koch behind the wheel helping us out with the suspension development. It is one of those cars that I warn people, if you drive it you will want to buy one.
Owner: Vincent Year/Model: 2010 Mazda RX-8 R3 Mileage: 60,000 (original engine, no issues)
Vincent’s Comments: I had been wanting a 2nd gen RX-8 since high school. This thing revs out to 9400RPM and is super fun to drive. Just recently sold (hi Aaron) but too good to not include in this blog.
Owner: Derrick Year/Model: 1993 Spec Miata Mileage: “Lots and lots” (this car has run 25hours of Thunderhill a few times on top of all its other racing)
Modifications: Spec Miata Bilstein shock package, Eibach swaybars, illegal plunge cut cylinder head (lookup spec Miata plunge gate 2014), GLoc brakes, 949 6ul Spec Miata wheels, AIM dash & datalog system, ESR drive side drop floor, Really big radiator.
Derrick’s Comments: I took the advice of all the spec miata people and bought a built car so I didn’t have to spend 6 months building one myself. The local car was raced for a long time in the northwest and was a front running car before it was parked for a few years. I picked it up for ~6k with some extra spares and was immediately able to get on the track and go racing after the installation of the drop floor and new seatbelts. The big question I have people ask me is why did you get a SM? The real answer is the level of drivers in the class. At any sanctioned race event weekend there are always SM and someone to race against and I have personally known several drivers go into SM a novice and come out the other side in pro racing. To win at SM you have to have your shit together. To be the best you need to compete against and beat the best so here I am.
Owner: Barett Model: Mazda B2600i Mileage: ?
Modifications: Solid axle swap with Toyota running gear, 4.88:1 axle gears, rear locker, 3 feet of articulation, 8000lb winch, high bolstered seats, 35×14.5R15 Super Swamper Bogger Tires, “lots of f*ckery fabrication.”
Barett’s Comments: This was my first real vehicle, and it taught me lots about owning a vehicle, modifying a vehicle and I have more memories with this beast than I can come up with right now. I beat the SH*T out of this truck and it’s always put away wet.
Owner: Rich Model: 1988 Mazda Rx- CONVERTIBLE
Modifications: Turbo engine swap, Apexi Power FC, CS Border Style body kit, CS front mount intercooler, CS turbo back exhaust, many other mods.
Rich’s Comments: The Rx-7 is kept in the garage and it’s mainly a fair weather/weekend car except during the summer. I take it out for special occasions or to just show off every once in a while. It’s a nostalgia piece for me.
Not Pictured:
2016 Mazda 3 Sedan. Derrick’s 2nd racecar. Caged, stripped, 2.0L AT converted to 2.5L MT.
Mazda RX-7 FC. Owned by Derrick.
NA Mazda Miata. Parts car for Derrick’s Spec Miata
For those keeping score, that’s 22 Mazdas in the CorkSport garage. The cars have come and gone over the years but one thing will always stay true: our cars will be fun to drive because they are Mazdas. Here’s to more Mazdas finding their way into the CS (and your) garage.
Oh and if you have any questions on the above cars, please let us know down below, we’ll be sure to pass on your question to the car’s owner.
I want to let you know what’s on my wish-list so that if you ever happen to stumble upon our wonderful little world of CorkSport, you’ll see everything I’ve been dreaming of.
1. New Mazdaspeed
While I personally prefer the Mazdaspeed3 hatchback look, I’d even be ok with a Mazdaspeed6 iteration. I like to have fun; I like to be pushed back in my seat by power and performance, and realistically I LIKE TO GO FAST. The newest generations of Mazda are missing some of these aspects, and I’ve been dreaming of their return!!
Now, don’t get me wrong, I like the Gen3 Mazda3. It’s a smooth ride, and we’re pretty stoked about what it can offer. However, our customers like to make power, N/A leaves us begging for more despite what HP we can squeeze out of the Mazda3.
So, Dear Mazda, Please bring back the Mazdaspeed!
2. Mazda CX-3 with a turbo
Genuinely, I like the look of the CX3, I enjoy the size of the CX-3 and even find that it suits my ever changing lifestyle being a little higher off the ground. (For those who don’t, check out CorkSport’s lowering springs for the CX-3). It’s just flat out missing the power that comes with a turbo. It’s “get up and go” is … well… slow. This could, with the right improvements, be a great replacement for the Mazdaspeed3 for those of us waiting for the newest generation. Just please, please, can we get some more POWER?!
3. Turbo Diesel Mazda 6
You gave it to everyone else!!! Why in the world would you leave us out?! You have to do ZERO redesigns; just getting it to the states is all I’m asking. The clean look of the Gen3 Mazda6 is something we like, but the power and improvements that come with the Turbo Diesel, I mean COME ON?! Just let us have a chance at it!
Heck, make that an AWD Mazda 6.
If you’re feeling generous, you could make it an AWD Turbo Diesel Mazda 6.
If we’re going THAT far, make it an AWD Turbo Diesel Mazda 6 wagon, because “I love me some hatchback!” that big booty look, and being able to fit all of the things… What’s not to love?!
It’s not a long list, and I realize that it’s selfish of me to ask, but I’m pretty sure I’m not the only one you would be making happy if you would just deliver on even ONE of these items.
Hopefully yours,
Kim@CorkSport
P.S Apple Carplay, and Android Auto… have been in the works for about 3 years, and you probably could have just hired a coder and completed a custom code in half the time… so we’re still waiting for that one too.
Dear Mazda, I have a Wish List December 15th, 2017CorkSport
Here at CorkSport, we are always working toward the next new product. We create our catalog just like you build your cars. Since there’s so much in development, we thought we would give you all a glimpse into what’s coming for the 2014+ GEN3 Mazda 3.
2.5L SkyActiv-G Turbo Kit
Let’s start with the big one since you’ve all been asking for updates: the 2.5 Liter Skyactive Turbo Kit. We are still making steady progress and are more excited than ever for this Mazda3 Turbo. Our functional turbo kit prototypes are slowly starting to arrive, meaning we are inching closer and closer to having our Mazda3 test car on the dyno (with added turbo noises). Stay tuned folks; this is going to be a fun one!
2014-2016 Mazda 3/6/CX-5 Motor Mounts
We already showed you the new and improved CorkSport Rear Motor Mount, but there’s more to come with the CorkSport Transmission Motor Mount. Check out the CAD model above to see what we’re talking about. Keep tabs on the CS blog for more info on the design and function of this motor mount soon.
2014-2016 Mazda 3 Skid Tray
The CorkSport skid trays have been consistently requested for the Mazdaspeed models; so much, that we brought them back for both the Mazdaspeed3 and the Mazdaspeed6. Now we are providing the same benefits to Mazda3 owners. We just received and test fit our first prototype skidplate, and it’s looking very promising moving forward.
2014+ Mazda 3 Suspension Kit
Need some extra handling and style for your Mazda3 but don’t want the hassle of lowering springs? We have created a kit that includes the CorkSport lowering springs, adjustable shocks/struts, and camber plates all assembled with OE accessories and ready to install. No spring compressors needed, for ease of installation. Coming soon…
2014+ Mazda 3 Front Sway Bar
Reducing overall roll or “sway” can drastically change your Mazda’s handling characteristics. We should be receiving our first prototype to test fit on our Mazda3 any day now are excited to see how it complements the CorkSport rear sway bar. Oh, and the new front sway bar is 3-way adjustable just like our ND Miata sway bars!
2014-2016 Mazda 3 Steering Wheel
Last, but not least, our leather steering wheel will be making a comeback in the coming months. Featuring a similar profile to the CorkSport Mazdaspeed3 steering wheels, it is designed to increase confidence in both aggressive and daily driving while staying comfortable and stylish.
As you can see, we are staying busy with the newest generations of Mazda here at CorkSport, but that doesn’t mean it’s the only thing we are focused on.
We still have plenty of upcoming products for you Mazdaspeed guys and gals, and for some platforms you may not be expecting. Keep tabs on the CS blog, Instagram and Facebook page to make sure you don’t miss anything!
Until next time,
-Daniel @ CorkSport
What’s in the Pipeline for the 2014+ Mazda3? February 21st, 2018CorkSport
We here at CorkSport are proud to announce the relaunch of the Mazda 3 Rear Motor Mount.
Yes, you read that correct, this is a re-launch. At CorkSport we push ourselves to design and develop new and interesting products every day, with that, we try new and innovative manufacturing designs and methods in an attempt to create exceptional, competitive, cost-effective products for our loyal customers.
Sometimes those new and innovative manufacturing methods end up not being as awesome as we originally expected. This is just part of the designing and learning process. Let’s get into the details.
The original, let’s call it V1, Mazda3 RMM used a new-to-us manufacturing method of applying the polyurethane to the billet aluminum body called vulcanizing. The billet aluminum body and the steel sleeves are mounted in a fixture then liquid polyurethane was poured into the assembly and cooled until the polyurethane had set to the final hardness. This process appeared to be very promising; each part was set up identically, it was nearly impossible to have any missing parts not sent to you, and most importantly the polyurethane was adhered to the billet aluminum body and therefore could not fall out. More on that last bit later.
We moved forward with the manufacturing method and had a few samples made with various polyurethane durometers ranging from 60A to 80A. After various testing, we determined that 70A was the best compromise of response and NVH (Noise, Vibration, Harshness) experienced by the driver. We continued testing for a few months to verify long-term durability and found no issues. Hooray! We moved forward with production to get this new great Mazda6 RMM out the door to you.
Unfortunately, it appears that our testing period just wasn’t quite long enough. Eventually, the polyurethane would fail but fail in a style we had never experienced before. Long story short, polyurethane has excellent compression strength compared to the tensile strength. The polyurethane was being pulled/split apart due to the forces of the engine.
Now we had a few options of how to redesign the Mazda 6 Rear Motor Mount after going through the failure analysis.
We could have simply stuck with the same design and just increased the stiffness of the polyurethane. Increasing the durometer rating of the poly increases the tensile strength, but this would have resulted in an unsatisfactory driving experience for you which was unacceptable.
The other option was to start from scratch again to create a new design that did not compromise the driving experience or the durability; with challenge comes innovation.
Again we went through many different designs, with the greatest challenge coming in the form of retaining the polyurethane pucks. Typically the polyurethane pucks are retained by whatever the mount is bolting to, but with the Mazda motor mount, the steel sleeves extend far past the outer edge of the polyurethane pucks. This leaves the pucks free to slide out of the billet aluminum body and cause a major failure.
Using the conventional polyurethane puck style, we developed a design that would work, but more than doubled the number of parts needed which increased the chance for something to go wrong and drives up the cost. This design is shown below:
The red arrows show the direction the conventional polyurethane puck would slide out of the body. The red circles show the puck retention system to hold the washer and pucks in the body. This retention design required many parts to be successful.
With the cost going through the roof we had to go back to the drawing board. There had to be a better way… and there was.
The third major iteration shown above solved the problems of the V2 design and got us away from the vulcanized polyurethane of the V1 design. Things were looking good. With the V3 design, the polyurethane pucks are pressed into the billet aluminum body. The pucks have ribs, shown with the red circles that are just large enough to keep the puck in place, but small enough to let the puck be pressed into the body.
With this, we were able to make some clever designs to the RMM to keep it centered in the engine and chassis brackets on the vehicle. The smaller diameter puck extends out to the ends of the steel sleeves; this keeps the entire rear motor mount centered. The large diameter puck retains itself in the body and allows the associated steel sleeve free to slide for easy installation; shown with the red arrows.
Now… does it work? YES! Pretty fantastically, we might add!
We have had this design on a handful of vehicles, one of those being the CorkSport Mazda 3 Racecar during the SCCA Run-Offs at Indianapolis Speedway. Other than some dirt and grime, the tested RMM looks great.
You were probably expecting this blog to be all about the details and reasons you should buy this performance RMM for your Mazda 3, Mazda 6, or CX-5. All those details can be found on our website, and I invite you to check them out.
What we really want to get across here is this:
First and foremost, we will always do the best we can to take care of you and your car if there is ever an issue or concern with your CorkSport part.
Second, if you are a driving enthusiast, if you go driving for the sake of just driving, then you need this RMM in your life. It will completely change and improve your driving experience, plain and simple.
-Barett, CS Engineering
The Mazda 3 Rear Motor Mount 2.0: Back & Better September 13th, 2018CorkSport
