CorkSport Throttle Body Spacer

We are proud to introduce the CorkSport 72mm Throttle Body Spacer for Mazdaspeed 3, Mazdaspeed 6, and Mazda CX-7 Turbo.

This is a great product for those Mazdaspeed owners who want push past the limits of their OEM fuel system. We’ve carefully chosen nozzle locations, upgraded the inside diameter, and added an O-ring for quick and easy sealing. We designed the CS throttle body spacer to eliminate a lot of the headaches that come with adding extra fuel.

The area where the throttle body mounts is pretty tight on the Mazdaspeeds which leaves few options for adding methanol nozzles, especially the tall AEM ones. We realized right away that nozzle orientation was critical.

To prevent any modification, the top nozzle location sits at an angle that perfectly clears both the OEM & CorkSport Intake Manifold to provide an access port for most meth nozzle styles on the market. For more stealthy setups, there are two ports located on the bottom side of the CS spacer, one straight down and once again at an angle for easy usability without further modification.

We also considered nozzle depth when designing the CorkSport Throttle Body Spacer. Most nozzle styles will sit flush to the inside surface of the spacer. This prevents any irregular airflow around the nozzle locations without affecting the spray pattern of the nozzles.

Just like the CorkSport Performance Throttle Body, we enlarged the inner diameter of the throttle body spacer to 72mm. This is the maximum size that can be used with the OEM bolt pattern and ensures optimal best airflow. The OEM throttle body & gasket can still be used with no issues.

Each CorkSport Throttle Body Spacer is precision machined from 6061-T6 aluminum before being anodized black for a clean and durable look. An O-ring groove is added during machining to allow the spacer proper sealing to your intake manifold. Rest assured, the O-ring is safe with all fuels and even oil. Finally, the spacers are laser etched with a CorkSport logo for a subtle finishing touch. The entire package is wrapped up with hardware; including extended length throttle body mounting bolts & two NPT plugs for the nozzle/injector ports you are not using.

If you’re running out of fuel in your Speed and we can make installing a methanol system much easier, pick up a CorkSport Throttle Body Spacer.

September 11, 2018December 26, 2023

Mazda’s Dynamic Pressure Turbo – A Closer Look

There has been a lot of buzz about the new(ish) turbocharged SkyActiv-G 2.5L first found in the Mazda CX-9 and now in the Mazda 6. Along with all this buzz, there are a lot of unknowns as well. Here at CorkSport, we’ve taken the step to try and address some of these unknowns. What is Mazda’s “Dynamic Pressure Turbo” and how does it work? There have been diagrams bouncing around on the internet, but no close-up view of the turbocharger itself. That’s about to change.

If you haven’t already read Daniel’s first installment, “Mazda Dynamic PressureTurbo an Introduction.” You wouldn’t want to miss out on the extra information before reading on.

The turbocharger found in the 2.5T equipped CX-9 and 6 is quite complex in design. There are many aspects to the OE turbocharger we could discuss, but today we are going to focus solely on the dynamic pressure system and turbine housing.

If you are reading this, then you’ve probably already seen various diagrams depicting how the dynamic pressure system works and showing Mazda’s clever 3-2-1 exhaust port design. If you haven’t, check it out below. Image credit to Car And Driver Magazine for the fantastic diagram.

Mazda’s 3-2-1 exhaust port design takes full advantage of the engine cylinder firing order. The advantage is improved exhaust gas scavenging for the adjacent cylinder (more or less the cylinder that just fired helps pull the exhaust gases out of the next cylinder that is about to fire). Ok, moving on; this is great, but how does the dynamic pressure system come into the mix?

Shown here are the turbocharger assembly and the dynamic pressure valve assembled as one unit (the first two images also showed the fully assembled setup). The three ports are clearly visible along with the “vane” that passes through the three ports. This vane rotates depending on the engine RPM to control the exhaust gas velocity entering the turbine housing. The vane itself is controlled by the larger blue-colored actuator.

Mazda 6 Turbo design for exhaust velocity

Now let’s take an even closer look. The vane does not open until approximately 1600rpm, but the engine cannot run if there is no exhaust gas can flow out of the engine. To resolve this Mazda has designed a dynamic pressure system with two exhaust gas paths. Looking at the above image you can see a small opening just above the vane. This is the sub-1600rpm exhaust gas path.

By reducing the cross-sectional area of the exhaust gas path, the exhaust is forced to accelerate through the dynamic pressure system and into the turbine wheel. This effectively reduces turbo lag, improving the vehicle’s response at low engine RPM. Once the engine revs past 1600rpm the vane opens, allowing the larger path to be used.

Here we show the turbocharger assembly (right) and the dynamic pressure valve assembly (left) separated. Looking at the dynamic pressure valve assembly, you can now more clearly see the three small paths above the larger path with the vane inside. Then look at the turbocharger assembly and you will see the small upper path and the larger lower path.

The fact that these two assemblies are separate systems is great news for the enthusiast. The development of a performance turbocharger will be much more feasible and the dynamic pressure valve can be retained with the performance turbocharger. One more detail to point out.

Mazda 6 turbocharger design for exhaust pressure

Mazda put a lot of thought into the design of the wastegate port; let me show you why. First, looking at the inlet of the turbine housing you can see a small vertical wall in the large path. This wall creates a completely separate path to the wastegate port which is very unusual on an OE turbocharger. Combine this design with a very large wastegate port and you get a design that can “waste” or divert an excessive amount of exhaust gas.

Mazda 6 turbocharger design for skyactive-g 2.5l

This tells us the SkyActiv-G 2.5L engine is creating a lot of (currently) unused exhaust gas energy. Again this supports the feasibility of a performance turbocharger suiting Mazda’s new turbo engine quite well.

Great things are on the horizon for the Mazda 6, now if only Mazda would put this engine in the 3 paired with a 6-speed manual transmission. Oh, one can dream.

-Barett @ CS

Connect with us

You may also like

August 21, 2018August 12, 2024

All About That CatBack Exhaust

Ever wonder about the key factors of making a decision about your aftermarket exhaust? Why Cat-back?

Is it the diameter of the exhaust that says performance? Or is it the type of metal used? What about fitment to your current setup? None of these questions alone answer what you need when making the decision on how to get more power out of your Mazda. Why the CorkSport Cat Back is the choice for your Mazda.

At CorkSport, we have made it our #1 priority to make our customer’s dreams a reality. Whether you drive a Mazdaspeed or a regular Mazda, we’ve made sure to engineer a great fitting exhaust that maximizes engine performance.

Check out the Cat-Back Exhausts by Car Model Below:

Take the Mazdaspeed 3, for example. When you purchase a Mazdaspeed Catback Exhaust, you’re getting T304 stainless steel piping that has been polished to a mirror-like finish.

You’re also getting true 80mm piping, which is slightly bigger than three inches, making our exhaust one of the biggest bolt-on catback systems.

Fitment is also a big concern for us. We make sure our exhaust systems are mandrel bent and TIG welded to ensure a perfect bolt-on fit.

Now that you know our exhaust is 80mm piping, polished to perfection, and made to be a direct fitment, you can bet this exhaust will increase performance and sound. By installing our cat-back exhaust, you’re removing the secondary unmonitored catalyst making the exhaust flow much faster out of the motor. By increasing the velocity of exhaust gases out of the motor, you increase power and make your turbo spool up a little bit faster.

Among the power gains you’ll see from installing the CorkSport Catback Exhaust, you’ll also enjoy the deep growl your Mazda now possesses. Our exhaust has one of the best-sounding tones on the market. With a quality made exhaust, comes quality sound.

When find yourself ready for a cat-back exhaust, be sure to check out CorkSport to ensure you get the highest quality for your ride.

May 31, 2018April 17, 2023

3 Turbos and a Supercharger for Mazda

A year ago we were all complaining at Mazda saying “where is the forced induction?” and it looks like Mazda was listening.

First up is the Mazda 6 turbo which Mazda has priced to sell as you can get into a GT Mazda 6 turbo pretty affordably. Granted there is no manual gearbox but I can say first hand they are fun to drive and the torque from the boost is really addictive. I find it hard not to want to screw with people in the 6 since it has no visible exterior queues that it has a turbo. I will say we have already been tweaking on the car and found that it does respond well to modifications.

Second up is the SkyactivX which Mazda says will be available later this year. This engine is supercharged to allow it to be an HCCI engine, aka compression gas motor. The forced induction setup is pretty tricky and the initial look I have done with it I get we can crank it up a bit more to improve the efficiency of the intercooler to give it more heat capacity to allow you to use the boost longer in the car for high-performance driving. Until it shows up we won’t know for sure but we are looking forward to trying it out.

Third is the Mazda 6 diesel which uses 2 turbos. Mazda tried to release the 6 in the past but when they couldn’t match what VW was doing they declined to just “Send It” as the car didn’t perform as they needed it to and still hit the emissions targets without urea injection. Later we all found out VW was a cheating bastard which kept us from having the Skyactiv diesel engine here to crank up the boost on. About every publication in the planet has posted up about the 2018 Mazda 6 diesel being seen in the EPA parking lot for testing along with a pile of other diesel models. This is a good sign if Mazda says it will pass the US emissions and handed one over to the EPA we can expect a Mazda 6 turbo soon.

I am going out on a limb here and saying that besides the announced Mazda 3 Skyactiv we are going to get something fun in the new Mazda 3 ~ a year after the initial release. If you are reading this Mazda, please give us a Mazda 3 GT with a turbo motor.

-Derrick

March 20, 2018May 28, 2024

Mazdaspeed3 Build Part 2

Brett’s Car Part 2

Let’s pick up where we left off with part 1! The year 2015, I made my way back to the Golden State from Arizona. At this point in time, I was content with the power, but my Mazdaspeed 3 looked otherwise stock on the outside, so that was my next plan of attack.

After a couple of months of settling in, I hashed out my plan. My buddy back in Arizona, Travis was selling his Evo 10 wheels. They were freshly powder coated, and he had the ability to ship them from his work. He was nice enough to make that happen for me. Since I was getting new wheels on the way, I knew it was time to drop it, so I purchased lowering springs. Since my Mazdaspeed 3 only had 15k on it at the time, I opted to keep the OEM shocks and struts, knowing Coil-overs were down the road. But, it is advised to use the upgraded shocks and struts with lowering springs, especially on older suspension.

After it was all said and done, I was happy with this look. It stayed like this for a few months until I got bored again. The mod bug started to itch, so, I decided it was time to upgrade to a 3.5” intake and get a port and polished manifold to see what this KO4 could do. With the 3.5” intake it also needed a battery relocation kit.

Knowing that the Mazdaspeed Big Turbo was down the road, I thought about the future and where I could save potential dollars. We got it up to about 325-330 WHP on the K04 Turbo with some e85. For California’s terrible 91 Octane fuel, I was satisfied. I also threw on boost and oil pressure gauges to monitor more in the Mazdaspeed. Oil pressure was the key!

CorkSport Mazdaspeed Boost and Oil Pressure Gauges — Mazdaspeed Boost and Oil Gauges

I got more acquainted with the local Mazda community in Nor Cal and ended up meeting one of the largest influencers for my build this way. Brian of BMSPEC. During this time, BMSPEC was just a side project for him as we worked full time as an Engineer in the cooperate world. He ended up taking me under his wing (No pun intended) and taught me a thing or two. In return, I helped him out after work to make Aero Parts like wing extensions and splitters. I assisted where I could with the dirty work, and my car was one of the beta testers. So, for those of you that wonder where my extension and splitter came from, there is your answer!

Mazdaspeed 3 front view at Golden gate bridge

Brian guided me on the right path to take for setting up my coil-overs and getting my Mazdaspeed 3 to not only handle as well as possible but also look good while doing it. It was awesome for me to be able to represent his parts and start to make my car stand out. I am very fortunate to have had that opportunity and be able to call him my friend.

In early 2016, I was driving behind a semi-truck on the freeway which resulted in pretty a chipped-up bumper. Working closely with my body shop, we got my Mazdaspeed 3 fully repainted (Minus the hatch.) I requested that the mirrors be painted black, Roof black, fog bezels black, and the rear valence black. It took several months for them to finish, as I gave them permission to take their time. But they did an incredible job, and the paint has held up phenomenally.

Rear Mazdaspeed 3 with upgrade spoiler — Mazdaspeed 3 and Mazda 3 at Golden Gate Bridge

A few months before my move to Washington, I finally hopped on a big turbo upgrade. Paired with this was an upgraded EBCS, and MAP sensor. The Mazda Intercooler was also upgraded from a TMIC to an FMIC. She was starting to turn into the car I had aspired to build. But, as all us car guys know, this just means the bar gets raised higher and our aspirations grow further! An upgraded intake manifold was also added to even out air flow between runners even more.

The time is now late 2016. I got offered a job with CorkSport right after Thanksgiving. So I packed up, said goodbye to all my close friends to set out on a venture in the PNW. Things were beginning to get more interesting, and the journey for my Mazdaspeed3 would continue. Stay tuned for part 3!