Mazda 6 Turbo Down Pipe

Time for more horsepower and boost with the Skyactiv 2.5 Turbo engine.

The Mazda 6 just got its next upgrade in the form of the CorkSport Downpipe for 2018-2022 models equipped with the 2.5L Turbo engine. We took the OEM downpipe and improved on it in every way, including sound, flow, power potential, and even ease of install! Help unlock power with the Mazda6 Turbo downpipe and take a step forward to more making power!

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

Stay Up-to-date with CorkSport   


The CorkSport downpipe uses a 2-piece design that starts with a cast 304 stainless steel bellmouth. This provides a high-flowing, smooth transition from the turbocharger to the piping that will stand up to the test of time and the high heat of the turbo. The piping is upgraded from the OEM 65mm diameter to 80mm mandrel bent piping to maximize flow and reduce restrictions. The bellmouth is joined to the piping using CNC machined v-band flanges which ensures a leak-free seal.

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

The two-piece design is not all about flow through. We optimized the casting design to be easy to install and tighten all the hardware. Since you do not have the piping in the way, like you would with a one-piece downpipe, the mounting hardware at the turbo is very easy to access! Fitment is also spot on, as we used 3D scan data from the OEM downpipe when designing the CS downpipe. That means great fitment with your existing aftermarket exhaust, or even the OEM one! With exhaust, the CorkSport downpipe will change the exhaust note of your Mazda 6. With the full CS catback exhaust, we noticed a different tone with some extra “growl” and a very slight increase in volume. This goes for both the catted and catless setups, with just a hint more drone with the catless setup.

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

All of the efforts to reduce flow restrictions are in the name of power! By smoothing the exhaust path and eliminating restrictions, the turbocharger can breathe better. While we have not been able to fully tune the car to take advantage of the flow gains (more on that later), typically an upgraded downpipe offers faster spool times, better peak power, and can help hold power better at higher RPMs. We hope to be able to test & validate the power potential of the MZ6T downpipe soon, but for now, know that the CorkSport Downpipe has enough flow capacity to efficiently support 500+ WHP, assuming you’ve got the mods to make that power!

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

So the elephant in the room: tuning. While the CorkSport Downpipe can be installed and driven on an otherwise stock Mazda 6 Turbo, we strongly recommend a tune after installing the CS downpipe. There are some fairly strict limits to airflow and torque in the OEM tune that can result in some mild surging or “hiccups” especially when at wide open throttle. This is simply the car hitting those limits and pulling back power. We have experimented with these limits and have found no long-term effects of hitting the limits or even going beyond. They are very conservative limits for safety with stock parts. With more efficient parts, your engine works easier and is able to produce added power/torque and consume more air so the limits are simply hit easier.

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

Let’s go through some housekeeping on the Mazda 6 Turbo downpipe. We offer the downpipe in both fully catless and with a high flow 300cel cat. As modifying or removing the primary cat is illegal in most areas, both options are sold for off-road or race use only. The fully catless setup will be the best for power gains but also comes with an all but guaranteed check engine light. The catted option cuts down on the smell of a fully catless setup but will sometimes still throw a CEL. This CEL can however be disabled with a tune.

Mazda 6 Turbo Downpipe for 2018-2022 Turbo

Finally, what comes in the box with your MZ6T downpipe? Each kit comes with all the hardware needed for installation. This includes new turbo studs & crimp nuts, exhaust connection hardware, a Remflex exhaust gasket, and the stainless steel v-band clamp for connecting the upper and lower sections. Also included is a support bracket for the downpipe and even a custom heatshield to deflect heat away from engine bay components. Both come with required mounting hardware as well!

Mazda 6 Turbo Downpipe equipment

Be sure to check out the product listing HERE for more images, a product teaser video, and pricing. Ready your Mazda 6 Turbo for some big power with downpipe kit from CorkSport!

Connect with us:

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

You may also like:

6 Replies to “Mazda 6 Turbo Down Pipe”

  1. Dyno chart would be nice. No sounds clips for the downpipe? When is tuning available and would that tuning be announced?

Leave a Reply

Your email address will not be published. Required fields are marked *