Tag: Mazda 3

Posted on

2018 CorkSport Garage Update

CorkSport's Mazda 3 guide.

CorkSport Garage

How about something a little different from the usual CS blog? I thought I would give you all a little insight into all the different Mazdas that are owned by employees. Some are daily drivers, some are full racecars, and some are…different (more on that later). So grab a cold refreshment, we’ve got quite a few cars to go through.

The Mazdaspeeds

Mazdaspeed Miata
Owner: Corey
Year/Model: 2004 Mazdaspeed Miata
Mileage: 28,800

Modifications: Full Flyin’ Miata CAI, polished stainless piping, Turbosmart recirculating bypass valve, manual boost controller, O2 signal modifier, boost gauge. Recent Mustang Dyno showed a consistent 189.9WHP.

Corey’s Comments: Purchased new to me at 17,000 miles in 2012 for my 40th birthday. The Mazdaspeed Miata had been stored for 4 years-everything was original, even the tires. This Miata came from California and had never seen rain. I keep it in the garage and it’s mainly a fair weather/weekend car except during the summer. I enjoy taking a ride in the MSM with each of my kids, but love honking the horn at people and making my son wave back…like he knows them.

2009 Red Mazdaspeed 3 GT
Owner: Luke
Year/Model: 2009 Mazdaspeed 3 GT
Mileage: 124,000

Modifications: Full bolted, built engine, CS prototype turbo, methanol injection. Too many CorkSport Parts.

Luke’s Comments: Car has been through stock turbo/stock block, CS turbo/stock block, CS turbo/built block, 35r/built block, and now CS prototype turbo/built block.  Fun fact: my girlfriend went faster in my car than I did when I first bought it.  Stock turbo went 12.8 @ 110mph in the  1320.

Owner: Daniel
Year/Model: 2007 Mazdaspeed 6
Mileage: 68,000

Modifications: Custom front license plate delete, CS Interior LED Kit, daily driver dirt.

Daniel’s Comments: Just bought the Mazdaspeed6 a few weeks ago, doing a ton of maintenance before mods. This er fleet vehicle (whatever that means). Bought it from a guy who owned it the past ~9 years. Hoping to sneak some new Mazdaspeed 6 parts into the CS catalog and feed the zoom-zoom obsession!

Owner: CorkSport (shop car)
Year/Model: 2013 Mazdaspeed 3
Mileage: 14,000

Modifications: Virtually everything in the CS catalog for MS3. Plus a few prototype parts that never made their way to the market.

Comments:  Affectionately called “Whitey”. On its 2nd built engine (we use and abuse this thing). This was one of Vincent’s first projects when he arrived at CS: rebuild Whitey’s engine. He just got done rebuilding it for the second time and is now breaking it in.

Owner: Barett
Year/Model: 2009 Mazdaspeed 3
Mileage: ~135,000

Modifications: Manley internals, L19 head studs, CS cams, bowl work & porting, all the bolt-ons, 28gph methanol injection, prototype CS turbo, 330mm BBK, other suspension bits.

Barett’s Comments: More info on the engine build here. Made ~465whp at the 2017 CS dyno day. My car hates me and is a constant work in progress. (Check out all the updates for Barett’s Mazdaspeed 3)

Owner: Brett
Year/Model: 2013 MazdaspeeD 3
Mileage: 37,000

Modifications: Full CS bolt-ons, big turbo, meth injection, making 430whp 385ft-lbs. BC coilovers w/ custom rated Swift springs, BMSPEC front splitter, Varis rear diffuser, custom side skirt extensions, Volk TE37SL: front 18×11 rear 18×10, paint matched 240Z flares, 330mm Mazdaspeed3 Big Brake Kit.

Brett’s Comments:  I’ve had the Mazdaspeed3 for about 4 years now. It has every CS bolt on in the catalog. Helps that I work here now. This MS3 makes ~430 WHP, and is a stock block for now; built block soon to come. I take more pictures of this car than I do anything else. 

The GEN 3’s

CorkSport's Mazda 3 guide.
Ready to mod your Mazda 3? You will be after you read this!
Owner: Jennifer
Year/Model: 2014 Mazda 3 2.5L Hatch
Mileage: 100,000

Modifications: Most of the CS catalog for GEN3: Intake, exhaust, lowering springs, adjustable struts, rear sway bar, aluminum skid tray, etc., GEN2 MS3 wheels, big CS livery.

Jennifer’s Comments: The car has been used for the majority of the Mazda3 research and design at CS. This Mazda 3 is daily driven ~80miles each day to torture test CorkSport parts, it helps that the commute to my house is that far round trip. Basically, my daily drive is a perfect example of “running up a hill both ways” for this Mazda 3.  

(Left)

Owner: Collin
Year/Model: 2016 Mazda 6
Mileage: 40,000

Modifications: CS RSB, prototype CS Front Strut Bar, CS RMM, prototype CS performance header, CS license plate kit.

Collin’s Comments: Aside from the performance parts available at CS, I chose this car due to the extra ~30HP compared to most commuter cars. I still get 42MPG on my freeway commute. This is my first New Car I bought myself and I have loved learning how to modify on it. 

(Right)

Owner: Rich
Year/Model: 2014 Mazda 6 GT

Modifications: CS lowe\ring springs/struts, CS front camber plates, CS rear camber arms, CS SRI, CS catback, CS radio control knob, CS license plate kit, 25mm wheel spacers

Rich’s Comments: I drove around the same B2300 for many years while we built CorkSport from the ground up. I finally decided to treat myself and picked this Mazda6 up in 2014. Big shift, and I’ve loved having the luxuries of this Mazda 6. 

Owner: Derrick
Year/Model: 2014 Mazda 3 2.5L Sedan

Modifications: Caged, stripped, CS SRI, straight pipe to CS axleback, bunch of custom adjustable suspension, Big Brake Kit (sometimes), custom racetrack-modified bodywork.

Derrick’s Comments: This Mazda3 could not be sold as a road legal car, so I don’t drive it on the road. There are a TON of track hours on this Mazda 3 and all of it’s modifications. We basically TRY to break our test parts before we let them hit the market, which is good for me because I love to go fast.

Owner: CorkSport (shop car)
Year/Model: 2018 Mazda 3 2.5L Hatch
Mileage: 2900

Modifications: CS struts, CS lowering springs, CS camber plates, CS RMM.

Comments: Mainly stock so far, big things to come to the “CBR” (CorkSport Branded Ride). Brett, who has been dailying the CBR, somehow only is getting 23mpg. Expect more parts for facelifted GEN3’s with the CBR’s arrival.

The Others

Just because you may not have seen much about them and they don’t get their own category does not mean they’re not special. For me, some of the most interesting cars are down below.

Owner: CorkSport (shop truck)
Year/Model: 1995 Mazda B2300
Mileage: 160,000

Modifications: Sweet stickers for extra HP, tire shop wheels, custom faded paint

Comments: Vincent used to own this truck before selling it to be the “new” CS shop truck. He notes that it was involved in 3 accidents, each time the insurance company did not total the truck, leaving Vincent with more money than he spent to buy the truck. No power steering provides an arm workout for those lucky enough to drive this beast.

Owner: Derrick
Year/Model: 2016 Miata Launch Edition.
Mileage: 24,000

Modifications: Full CorkSport ND Miata catalog – CS cold air intake, CS catback exhaust, CS front sway bar, rear sway bar, CS lowering springs, CS adjustable front end links, VersaTune CS parts tune, CS short shifter – Sparco Drift wheels, Bridgestone Blizzak run flats

Derrick’s Comments: The ND is an interesting car for me as being a lifelong Mazda enthusiast I had never owned a Miata before.  When the ND was announced I had already converted the Mazda 2 into a B-Spec car so I stopped street driving it and went back to my Rx7 turbo as my daily driver so I had gotten used to driving a car with “issues” again.  When I got into the ND for the first time and drove it home it was very surreal expecting some weird sound or smelling hydrocarbons (the Rx7 is old and catless) and the car handled incredible right out of the box.  Of course that lasted all of 3 months until we have Kenton Koch behind the wheel helping us out with the suspension development.  It is one of those cars that I warn people, if you drive it you will want to buy one.

Owner: Vincent
Year/Model: 2010 Mazda RX-8 R3
Mileage: 60,000 (original engine, no issues)

Modifications: Turbo XS exhaust, K&N high flow filter, custom VersaTune tune, DBA club spec rotors, Hawk Street/Race pads, Goodridge stainless steel brake lines.

Vincent’s Comments: I had been wanting a 2nd gen RX-8 since high school. This thing revs out to 9400RPM and is super fun to drive. Just recently sold (hi Aaron) but too good to not include in this blog.

Owner: Derrick
Year/Model: 1993 Spec Miata
Mileage: “Lots and lots” (this car has run 25hours of Thunderhill a few times on top of all its other racing)

Modifications: Spec Miata Bilstein shock package, Eibach swaybars, illegal plunge cut cylinder head (lookup spec Miata plunge gate 2014), GLoc brakes, 949 6ul Spec Miata wheels, AIM dash & datalog system, ESR drive side drop floor, Really big radiator.

Derrick’s Comments: I took the advice of all the spec miata people and bought a built car so I didn’t have to spend 6 months building one myself.  The local car was raced for a long time in the northwest and was a front running car before it was parked for a few years.  I picked it up for ~6k with some extra spares and was immediately able to get on the track and go racing after the installation of the drop floor and new seatbelts.  The big question I have people ask me is why did you get a SM?  The real answer is the level of drivers in the class.  At any sanctioned race event weekend there are always SM and someone to race against and I have personally known several drivers go into SM a novice and come out the other side in pro racing.  To win at SM you have to have your shit together.  To be the best you need to compete against and beat the best so here I am.

Owner: Barett
Model: Mazda B2600i
Mileage: ?

Modifications: Solid axle swap with Toyota running gear, 4.88:1 axle gears, rear locker, 3 feet of articulation, 8000lb winch, high bolstered seats, 35×14.5R15 Super Swamper Bogger Tires, “lots of f*ckery fabrication.”

Barett’s Comments: This was my first real vehicle, and it taught me lots about owning a vehicle, modifying a vehicle and I have more memories with this beast than I can come up with right now. I beat the SH*T out of this truck and it’s always put away wet.

 Owner: Rich
Model: 1988 Mazda Rx- CONVERTIBLE

Modifications: Turbo engine swap, Apexi Power FC, CS Border Style body kit, CS front mount intercooler, CS turbo back exhaust, many other mods.

Rich’s Comments: The Rx-7 is kept in the garage and it’s mainly a fair weather/weekend car except during the summer. I take it out for special occasions or to just show off every once in a while. It’s a nostalgia piece for me. 

Not Pictured:

  • 2016 Mazda 3 Sedan. Derrick’s 2nd racecar. Caged, stripped, 2.0L AT converted to 2.5L MT.
  • Mazda RX-7 FC. Owned by Derrick.
  • NA Mazda Miata. Parts car for Derrick’s Spec Miata
  • Mazda 5. Derrick’s wife’s car.
  • Mazda CX7. Kelly’s daily driver.

For those keeping score, that’s 22 Mazdas in the CorkSport garage. The cars have come and gone over the years but one thing will always stay true: our cars will be fun to drive because they are Mazdas. Here’s to more Mazdas finding their way into the CS (and your) garage.

Oh and if you have any questions on the above cars, please let us know down below, we’ll be sure to pass on your question to the car’s owner.

-Daniel

Connect with us

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

Posted on

Protect your Mazda 3 with the CorkSport Skid Tray

Extra Protection for your 2014-2016 Mazda 3

That’s right folks; CorkSport’s favorite skid trays have made their way to the GEN3 Mazda 3. Whether you have a broken OE plastic skid tray or are just looking for some extra protection for the winter months, please welcome the CorkSport 2014-2016 Mazda3 Skid Tray. Made from laser cut, 0.090” thick aluminum formed to a perfect fit, this skid tray is a direct upgrade from the OE Mazda3.

From the factory, the GEN3 Mazdas come with a flimsy plastic under tray that can crack and break with the smallest of impacts.

Stay Up-to-date with CorkSport   

It exists primarily to smooth the airflow traveling under your car and act as a splash shield for the engine compartment while driving in the rain but offers no real protection for your oil pan. We felt compelled to remedy this issue, and thus, the CorkSport Mazda3 Skid Tray was born.

The 0.090” thick aluminum protects your Mazda 3 from road debris, rocks, and damage to vital engine components while adding minimal weight to your car. This aluminum is the same material as our Mazdaspeed 3 skidplate, and it has proven itself to take plenty of punishment. We even torture tested one of our prototype skid trays during the 25 Hours of Thunderhill on the CorkSport Mazda 3 Race Car and had no issues.

As always, we sought out to make the installation as painless as possible while retaining all OE features. The CorkSport skid tray only uses the OE mounting locations without having to drill or trim anything. The CorkSport Mazda3 skid tray is a two-piece design that allows for a more straightforward install. Each piece is more manageable to move around for installation than the traditional one-piece design. As a bonus, it also makes the shipping is cheaper! We retained The oil and filter access panel so you can easily perform maintenance without having to remove the Mazda3 skid tray.

By extending the front of the skid tray above the bottom of the front bumper like OE, the CorkSport Skid Tray retains the smooth transition from bumper to skid tray to ensure smooth airflow under your car. You can even run the CorkSport Skidplate with the Mazda OE front lip with no issues.

If you’re worried about your oil pan or can’t seem to keep an OE skid tray in one piece, let the CorkSport Skid Plate for 2014-2016 Mazda 3 alleviate your issues.

P.S. Our two-piece design allows us to develop fitments for other models. If you’re interested in a skid plate for your car, let us know, and we might start work on one for you!

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required
Posted on

Sneak Peek at an Upcoming Transmission Motor Mount

Here is a treat for GEN3 (2014+) Mazda 3 owners!

We are in the process of designing and producing a CorkSport Transmission Motor Mount, (TMM), to reduce the excessive engine movement present from the factory. Buckle up as we go through a sneak peek at some features and go through the design process and decisions that all serve to give you a better mount in the end.

Mazda 3 without sacrificing drivability or OEM fitment. Stiffer motor mounts are a great way to improve throttle response, improve shift feel, and reduce wheel hop by reducing the total amount of engine movement but they can hugely increase NVH (noise, vibration, and harshness). As such, there is a balancing act between finding an acceptable level of NVH for the performance gains you get.

Stay Up-to-date with CorkSport   

In a typical front wheel drive car the engine is mounted in a transverse matter, that is, the engine is parallel to the axle centerline. So when the engine tries to turn the wheels, the force to do so tries to make the engine rotate in the opposite direction. Motor mounts resist this motion of the engine.

Initially, we wanted to change the orientation of the factory mount for the Mazda3 to use the polyurethane bushings in the most optimal way possible as the bushings function best when they are parallel to the axis of rotation. Doing so proved to be difficult as we were effectively creating a new pivot point in the system.

Going through this design, we also realized that overall size was becoming a problem as different transmissions have varying heights. Since this mount sits right above the transmission, this was a vital thing to keep in mind. So for our 2.5L manual Mazda 3, we had a good amount of room below the mount, but it needed to go on a serious diet to fit an automatic model. This meant moving to a drastically smaller bushing which likely would have increased NVH, only using the mount for manual models, or using a custom bracket for each different transmission & model. Check out down below for one of the early (and ugly) designs.

So we went back to the drawing board. We decided to move forward with a design similar to the OE design. Doing so allowed for a smaller mount, easier manufacturing, and a significantly wider applicable model range. This includes all 2014-2016 Mazda 3, all 2014-2016 Mazda 6, and 2013-2016 CX-5 (we have not confirmed the 2017+ models years yet, but there’s a good chance this will be compatible).

Even though we went to a similar design to OE do not assume it’s the same thing. The CorkSport mount has the same diameter bushing as the OE mount; however, the OE mount does not utilize all the available space. This means that in addition to the stiffer polyurethane material, there is simply more material to resist the engine’s movement.

The CorkSport TMM utilizes billet aluminum for the main body of the mount with stainless steel plates for the washers and the angled section of the mount. This provides a more attractive and lighter mount than the OE offering while retaining the same strength and fitment of OE. Check out the picture down below for a look at one of our 3D printed prototype test fits.

We just received our first functional prototypes for further fitment and testing since 3D printed plastic parts don’t support an engine & transmission very well. With these samples, we can determine exactly how stiff to make the polyurethane and finalize the best possible design for you. During our test fit, we even noticed some deterioration of the OE mount.

This OE mount came off of the CorkSport Mazda 3 racecar. While it does not have many miles, they have all been racing miles that are very hard on all vehicle components. Check out the image down below to see a comparison between the used mount (left), a new mount (center), and the CorkSport prototype TMM (right). It’s interesting that Mazda has made some changes to their OE mount in the last few years. What you can’t see very well is that the racecar’s mount has areas where the rubber is starting to separate from the metal center section of the mount. There are even a few small tears forming on some of the inner bushing surfaces.

These signs of wear are encouraging to us at CS since this means we are helping to solve a potential problem facing 2014+ Mazda3 owners. As such we could not wait to get the TMM on a car for testing. Fitment is great so far, and we were even able to overcome some minor manufacturing errors. The first test for the mount was with the CorkSport Mazda 3 racecar at the 25 hours of Thunderhill. This event is an endurance race that runs for 25 hours straight.

The Mazda3 completed 613 laps during this time covering over 1800 hard miles. This is a torture test for any part, and I’m happy to report that the CorkSport TMM passed with flying colors. The drivers liked the mount and Derrick (who owns the car) reported greatly reduced slop in the transmission when shifting. Here is what the mount looked like after the 25-hour long race:

Aside from being very dirty and having a few scratches where it was bolted down, the mount had no issues and was still in good working condition. It already has a new home in a daily driven Mazda 3 to get even more testing done. Initial impressions are good, but we will look to decrease NVH as much as possible before any of you get your hands on it. Look for the CorkSport 2014+ Mazda 3 Transmission Motor Mount in the next few months.

Transmission Motor Mount

Stiffer motor mounts are a great way to improve throttle response, improve shift feel, and reduce wheel hop by reducing the total amount of engine movement but they can hugely increase NVH (noise, vibration, and harshness).

Visit

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required
Posted on

Dear Mazda, I have a Wish List

Dear Mazda,

I want to let you know what’s on my wish-list so that if you ever happen to stumble upon our wonderful little world of CorkSport, you’ll see everything I’ve been dreaming of.

1.      New Mazdaspeed

While I personally prefer the Mazdaspeed3 hatchback look, I’d even be ok with a Mazdaspeed6 iteration. I like to have fun; I like to be pushed back in my seat by power and performance, and realistically I LIKE TO GO FAST. The newest generations of Mazda are missing some of these aspects, and I’ve been dreaming of their return!!

Now, don’t get me wrong, I like the Gen3 Mazda3. It’s a smooth ride, and we’re pretty stoked about what it can offer. However, our customers like to make power, N/A leaves us begging for more despite what HP we can squeeze out of the Mazda3.

So, Dear Mazda, Please bring back the Mazdaspeed!

2.      Mazda CX-3 with a turbo

Genuinely, I like the look of the CX3, I enjoy the size of the CX-3 and even find that it suits my ever changing lifestyle being a little higher off the ground. (For those who don’t, check out CorkSport’s lowering springs for the CX-3). It’s just flat out missing the power that comes with a turbo. It’s “get up and go” is … well… slow. This could, with the right improvements, be a great replacement for the Mazdaspeed3 for those of us waiting for the newest generation. Just please, please, can we get some more POWER?!

3.     Turbo Diesel Mazda 6

You gave it to everyone else!!! Why in the world would you leave us out?! You have to do ZERO redesigns; just getting it to the states is all I’m asking. The clean look of the Gen3 Mazda6 is something we like, but the power and improvements that come with the Turbo Diesel, I mean COME ON?! Just let us have a chance at it!

Heck, make that an AWD Mazda 6.

If you’re feeling generous, you could make it an AWD Turbo Diesel Mazda 6.

If we’re going THAT far, make it an AWD Turbo Diesel Mazda 6 wagon, because “I love me some hatchback!” that big booty look, and being able to fit all of the things… What’s not to love?!

It’s not a long list, and I realize that it’s selfish of me to ask, but I’m pretty sure I’m not the only one you would be making happy if you would just deliver on even ONE of these items.

Hopefully yours,

Kim@CorkSport

 

P.S Apple Carplay, and Android Auto… have been in the works for about 3 years, and you probably could have just hired a coder and completed a custom code in half the time… so we’re still waiting for that one too.

Posted on

Kill The Nannies – How to Overcome Mazda’s Safety Measures for Racing

Nannies. One thing we have discovered while racing our Mazda 3 is that the OEM safety systems in the newest generation of Mazda 3 work well, too well in fact for racing.

Each year, new safety features are added by Mazda which make the cars safer and reduces the risk of collisions. This is great for day-to-day driving and commuting, but it presents a problem if you plan to take your car to the track to race it.

The OEM system in the car really frowns on lifting a rear tire off the ground, or when you get wheel spin accelerating out of a slow-speed corner. They design the cars against these things happening for safety purposes (understandably). However, Mazda does give you a button on your dash to turn off the traction control. This gets us racers around the limitations to a certain degree.

Let me explain:

When you disengage traction control, the system which measures yaw/pitch and ensures your car has all the wheels on the ground is actually still working, even with the button off. What the button does essentially is give you a sort of leash with more leeway, until the computer thinks you have gone too far of course, then it will kick in traction control again.

So, how do we get past these nanny systems so we can push our cars for maximum performance?

Can you simply unplug the computer which controls the this? I wish it were that simple, but you cannot. The systems in the car are all tied to each other, and the car may not start, it may not run safely, or it may run in a limp mode. A good example of this in our 2015 Mazda3 is: if you unplug the rearview mirror the car won’t start. The ABS is also controlled by the same unit, and this is very handy to have on the track.  The ABS is very good in the Mazda3 by the way, so I recommend you keep it.

The solution we’ve come up with at CorkSport is pretty simple: Leave the computer plugged in and turn it over.

That’s it, simple, nothing else is required. What happens when you turn the computer upside down is the computer loses its physical reference point, so it defaults by turning off the stability control and nannies, but most-importantly, the ABS still functions.

A big word of caution: The computer which controls the nannies also runs the airbags. If you race your car on the track, the airbags will have been removed from your car already. DO NOT drive your airbag-equipped car with the module flipped over.

The reason this solution works for the track is that our Mazda 3 race car has additional safety equipment installed, with the 6-point harness and halo seat, along with the rest of the driver’s safety gear, that keep you from injury in the event of any wrecks.

FYI: When using this “hack”, your Mazda 3 dashboard will light up like a Christmas tree from all of the warnings; but that is a small price to pay for the improved performance while racing.

–Derrick

DISCLAIMER: This modification is for racing purposes ONLY. Doing so will render many of your car’s safety systems ineffective. Installing other safety systems after this modification is essential.

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required