Tag: Mazda 2

Posted on

CorkSport Product Sneak Peek and Look Back 2011-2012

As we jump into the New Year I would like to share with you a rundown of the products we launched in 2011 and give you a first look at what you will be seeing to start off 2012.

2011 proved to be a busy year for CorkSport with 28 new products coming to market. In order of release, we added the following to our list of offerings:

Mazda 3/Mazdaspeed 3 Rear Chassis Brace Set
2010+ Mazdaspeed 3 Front Strut Bar
Mazda 2 Lightweight Crankshaft Pulley
Mazda 3/Mazdaspeed 3 Polyurethane Mud Flaps
Mazdaspeed 3 Lightweight Crankshaft Pulley
Mazda 3/Mazdaspeed 3 License Plate Relocation Kit
2010+ Mazdaspeed 3 Front Sway Bar
Mazda 2 Power Series Exhaust
2010+ Mazda 3 Power Series Air Box
RX-7 and RX-8 Banjo Bolt
Mazda 2 Quick Release Chassis Brace
Mazda 2 Front Strut Bar
Mazdaspeed 3/Mazdaspeed 6/CX-7 Turbo Top Mount Intercooler
Stubby Antenna
Mazdaspeed 3 Lowering Springs
Mazda Radiator Caps
Mazdaspeed 3 FMIC kit for SRI
Mazdaspeed 6 Mud Flaps
Extended Lightweight Lug Nuts
Mazdaspeed 6 Rear Sway Bar
2001-2003 Mazda/Mazdaspeed Protégé Skid Tray
Mazda 2 Front Sway Bar
Mazda 3/Mazdaspeed 3 Front End Links
Mazdaspeed 3 Short Shift Plate
Mazda 3/Mazdaspeed 3 Shifter Bushings
Mazdaspeed 3 Catted Downpipe
LED Underhood Lighting

So what can you expect from CorkSport to start off 2012?

Early next week we will be launching the CorkSport Front Camber Kit for Mazdaspeed 3. This kit is designed to provide camber adjustability and dial in performance on the Mazdaspeed 3 with up to -3 degrees of camber adjustability.

Next we will be rolling out a new and improved turbo inlet pipe for those who are running a stock or non-CorkSport intake system. The newest version of our turbo inlet pipe has been redesigned to provide seamless fitment with OEM or other aftermarket intake systems by replicating the fitment of the factory TIP to the intake while maintaining all of the characteristics that have made our turbo inlet pipe a top selling product.

We will also be introducing our staged intake systems with the addition of a stage one CorkSport short ram intake without turbo inlet pipe for those that want to upgrade to a basic package. The stage two intake system will be our number one selling CorkSport short ram intake with turbo inlet pipe and the stage three intake system will be the new CorkSport Cold Air Intake which has been designed to push the filter away from the engine and will have the unique feature of being interchangeable with our short ram intake system for customers wanting to run a cold air intake in the summer and short ram in the winter!

We will also be launching the highly anticipated CorkSport Oil Catch Can early this year. This has gone through several iterations to find the ideal design that would provide functionality and be simple to install. The end result is an aluminum, bolt-on oil catch can that will help keep your intake clean by filtering out the junk that would otherwise end up in your intake manifold and possibly on your valves. You can see a full string on the development of this product on the Mazdaspeedforum.

Also to come early this year is the new addition to our CorkSport LED lighting product line with the CorkSport Mazdaspeed 3 Bumper Lights.

Let’s also not forget our Mazdaspeed Protégé drivers out there, we have something for you as well with Mazdaspeed Protégé Silicone Intercooler Hoses expected to be out soon!

This represents just some of the great products you can expect to see from CorkSport in the coming year!

Gwynne-

Posted on

10,000 Miles Later – CorkSport Mazda2 Update

Our CorkSport Mazda 2 hit a milestone today and turned 10,000 miles on the odometer. It has taken us a little over a year to hit this point in the cars life which brings up some interesting points.

Our Mazda 2 has been a test vehicle for all of the Mazda 2 products we have engineered here at CorkSport. We get questions about our products asking how well they work and how they are tested. Our northwest location gives us a full range of weather conditions including snow, rain for days, and 90+ degree weather that we can test our parts in and with the company vehicles being driven daily, we get a chance to do real world testing constantly.

The CorkSport Short Ram Intake was one of the first parts we installed on the 2. So far we have put just under 9000 miles of combined road use and auto crossing on this intake with zero problems and great results.

Next came the CorkSport LED lighting kit along with the LED DRL kit. Now I wouldn’t normally bring up the LED light kit as you would not expect any problems with this type of modification, but I have seen posts on forums about people who have purchased from e-bay or another vendor saying their LED lights are failing after only a few months of use.

I can confidently say you will not have any problems with the LED lights purchased from CorkSport. One added bonus with our Mazda 2 kit is the front turn signals have built in resistors so your turn signals will flash at the normal speed.

The last piece we have had on the car for the longest period of time has been the CorkSport Rear Torsion Bar. When we took the Mazda 2 out to an autocross a few weeks after purchasing the car, we discovered the 2 was really biased to under steer, so we immediatly set out to correct this and came up with our rear torsion bar. The torsion bar made the 2 more neutral in handling and I couldn’t imagine driving a Mazda 2 without one now.

We are looking forward to developing and releasing some great parts for the Mazda 2 in the coming year and our customers can have confidence that any CorkSport brand part we develop has been thouroughly road tested and we have real world experience with the parts and their ability to improve the overall performance of the Mazda 2.

-Derrick

Posted on

Product Release! CorkSport Mazda 2 Front Sway Bar

CorkSport would like to announce a new addition to the CorkSport Mazda 2 line of suspension products, the Mazda 2 Front Sway Bar, developed to enhance Mazda 2 performance and handling.

The newly released Mazda 2 Front Sway Bar will reduce body roll during cornering and give the driver a crisper road feel. By strengthening the lower suspension connection across the front of the Mazda 2, the CorkSport Mazda 2 Front Sway Bar is able to reduce oversteer or understeer by complimenting other suspension upgrades and reduces body lean which keeps the outside tire in better contact with the ground in turns.

The Mazda 2 Front Sway Bar is made from CNC machined 7/8” 4130 steel tube and provides 60% more stiffness than stock front sway bar. The powder coated black finish offers long lasting durability and performance. The included polyurethane mounting bushings eliminate the sloppy handling caused by stock rubber bushings and offer long life and resistance to common contaminants that would destroy rubber bushings.

Thoroughly tested by CorkSport during autocross and recently listed in Mazda’s booth at SEMA 2011 in the concept Mazda 2 turbo car, the CorkSport Front Mount Sway Bar provides the Mazda 2 with a distinct racing advantage over stock sway bar and has been highlighted in publications such as Car Throttle, Autoweek, and Carbuzz.

The CorkSport Mazda 2 Front Sway Bar and has been tuned to compliment the CorkSport Mazda 2 Rear Torsion Bar and can be purchased as a kit for the competitive price of $268.20 or as an enhancement for your existing suspension upgrades for $199.00.

For more information about the CorkSport Mazda 2 Front Sway Bar, please visit the product page at https://www.corksport.com/corksport-mazda-2-front-swaybar.html

Posted on

SEMA & EECMM 2011 – Mazda Events and Car Shows East to West!

The CorkSport team has been on the road this week first sponsoring and attending the 5th annual EECMM (Epic East Coast Mazda Meet) held in Robbinsville, NC (think Tail of the Dragon) and then onto Las Vegas for the SEMA (specialty Equipment Market Association) show where more than 100,000 attendees and 2000 exhibitors met for four days at the largest annual automotive gathering and car show.

Appropriately named, EECMM was truly an epic event. Mazda enthusiasts from all over the east met up in Robbinsville, NC for five full days of cruising stretches of the famous Hwy 129, deals gap, a car show with awards and plenty of raffle prizes and evenings of BBQ’s and parties at the smoky mountain mansion with no shortage of good times had by all.

If you are not already familiar, the Tail of the Dragon is an 11 mile stretch with 318 curves and is America’s number one sports car road. The nearby Cherohala Skyway is another 60 miles of scenic mountain highway for the driving enthusiast to enjoy a more leisurely ride with it’s long, sweeping corners and scenic views.

CorkSport spent Saturday with the Epic crew. The car show featured about 60 cars and CorkSport was on hand with giveaways for the all of the attendees. Following the show the group went out for a ride on the Tail of the Dragon run while CorkSport prepared back at the mansion for a focus group. We then sat down with a group of customers and got the unique opportunity to gain feedback on what we are doing that works and what we can do to improve our products and services for the Mazda community. We stayed for some of the evening’s festivities, but had to run so we could catch an early flight out and onto Las Vegas the following morning.

What a great group of people and awesome event! If you haven’t made it to EECMM yet, you need to go! Keep posted on 2012’s event and stay connected on the EECMM facebook page.

Back to the other side of the country, SEMA kicked off on Monday.

Mazda had the MX-5 Spyder on display at this year’s show. This Lighterweight version of the Miata ditches the heavier retractable roof and in its place had a single-panel bikini soft top made by Haartz. Weight savings came in other forms as well with a light weight lithium ion racing battery and light weight Advan RS wheels. It got a the 2.0 liter 4-cylinder turbo enabled biofuel engine which promotes the greener direction Mazda is moving in.

As promised, the concept Mazda 2 turbo was also on display at the show with a Speed3 263-horsepwer turbocharged, direct-injected MZR 2.3 Liter engine under the hood.

The body gets a track-ready look, thanks to a body kit, some ground effects and the Sonic White tri-coat paint job with a black and green accents. Also included on the concept car were HR coilovers, CorkSport Mazda 2 Sway Bars, CorkSport front tower brace, CorkSport rear chassis brace, CorkSport rear torsion bar, a modified CorkSport SRI from a Mazdaspeed 3 and Yokohama Neova 215/40/17 tires with OZ racing wheels.

If you can’t wait for the Mazdaspeed2 to go into full production, the concept car built by Autobarn for the one lap of America race is available for purchase for an astounding ticket price of $94,999.

The booth also had a slightly less modded Mazda2 tuned by 3dCarbon, a MX-5 Super 20 custom and a classic Cosmo on display.

Flat-finished paint was all the rage at this year’s show and was embraced by hotrods and custom cars alike. The level of flatness/gloss ranged in scale from matte to reduced sheen and was available in every color from pearl white to bright orange.

There was a lot to be seen at this show. It could not possibly all be covered in this post, but an honorable mention extends to the new Lamborghini LP700-4 Aventador in the Pirelli booth. It has a v12 engine and can achieve 700 HP and top speeds of 270 mph. It was hard to resist falling in love with it!

The show continues today with Derrick still in attendance who I am sure will follow this post with some thoughts of his own from the show.

It’s been a long week, but it is always great to get out and and get to know our customers better, put faces to names, and find out what’s going on in the community.

Gwynne –

Posted on

B-Spec, Big Time

Over the last year there have been rumors of a racing series to run b segment cars on the track. Mazda and Honda decided to give it a shot, testing out cars at the 25 hours of thunder hill, which we blogged about last year with the Mazda 2 and the Fit.

On October 12th there were four cars which were tested by the SCCA at Michigan’s Grattan raceway to see how the cars stacked up against each other at racing speeds. The cars that showed up were the Mazda 2, Honda Fit, Ford Fiesta, and Fiat 500.

The SCCA tested out throttle restrictors and ballast weights to see how it affected each car. The restrictor and the ballast are used to equalize the playing field between the cars if one car has an advantage in weight or horse power.

The SCCA will be doing another round of testing at some point in January where they expect more manufacturers to show up. Kia has announced that they will have the Rio racing and has been rumors of Toyota and Nissan getting into the action next year as well.

The B-Spec class cars qualify for the SCCA showroom stock C category and there has been interest by both Grand-Am and World Challenge to pick up the series next year.

I am looking forward to seeing the cars our there on the track with some closer door to door racing next year.

-Derrick