Despite not being the ideal season to pull the top down, we have been busy giving the CorkSport ND Miata some love. Unfortunately this love does not come in the form of another CorkSport Performance part, but instead better takes advantage of your CorkSport Performance parts thanks to the Versatuner Tuning Solution.
With that, we are proud to announce our partnership with Versatuner and the ability to provide to all models supported by Versatuner.
Back to the 2016+ Mazda MX-5; working with the Versatuner Tuning Solution we setup pre-calibrated tunes that are designed to work with the CorkSport Performance Cold Air Intake System, Cat-Back Exhaust System, and the combination of the two.
Jumping right to Power Pack 3, that combines the CorkSport Cold Air Intake and Cat-Back Exhaust; you see a power increase of 9 wTQ and 13 wHP using 92 octane fuel. These aren’t just peak gains either, power/torque increases from 3000rpm up to redline which has been increased to 7400rpm. If you are not ready to pull the trigger on the CorkSport CAI and CBE together, then check out Power Pack 1 and Power Pack 2.
Power Pack 1 offers a combination of the CorkSport MX5 Cold Air Intake and Versatuner Tuning Solution with a pre-calibrated tune.
Power Pack 2 offers a combination of the CorkSport Mx-5 Cat-Back Exhaust and Versatuner Tuning Solution with a pre-calibrated tune.
What’s great about the Versatuner Tuning Solution is its flexibility to provide data logging, tune editing and diagnostics troubleshooting with any installed parts and any fuel type. The CorkSport pre-calibrated tunes are designed for 92 octane fuel, so we do recommend having a custom tune performed for your MX-5 if 91 octane is the highest grade fuel available in your area. Those of you with 93 octane fuel need not worry, but there could be more to ring out of your little 2.0L Sky-G with custom tuning.
Lastly, you might be wondering why the Power Packs have any significance to you? Well along with power, aesthetics, and glorious noises, we are able to cut you deal when you get the combination of CorkSport Performance parts and Versatuner Tuning Solution. We’re here to make modifying your Miata easy and fun.
Thanks for tuning in with CorkSport Performance.
-Barett @ CS
Versatune Packages for Mazda MX-5 Miata July 1st, 2019CorkSport
As the New Year rolls around, most people are looking for a change for the better in their lives.
At CorkSport we think one of the best changes you can make is more power for your Mazdaspeed. We have all the parts you need to liven up your Mazdaspeed3 or Mazdaspeed6 in the New Year.
Safety First
One of the first things to consider when modifying your Speed is the health of its engine. Performing maintenance is very important but it only gets you so far. When adding power, one of the first modifications on your list should be the CorkSport Max Flow Fuel Pump Internals.
These pump internals allow you to maximize your stock fuel system for optimum power capabilities and safer than OE A/R ratios. This means you can add the power you want and have peace of mind that your engine will get the fuel it needs.
Put the Power Down
Like the CS fuel pump internals, the CorkSport Stage 2 RMM for Mazdaspeed 3 will not directly increase the power levels of your car; however, it helps you put all that hard-earned power down. By decreasing the amount the engine can rotate, the Rear Motor Mount allows for reduced wheel hop and torque steer while providing faster throttle response and crisper shift feel.
Even we are surprised how much this engine mount changes how a Mazdaspeed 3 feels. Don’t worry Mazdaspeed 6 guys and gals, we have an RMM for you too.
Improving Airflow
Engines in an extremely simple sense are air pumps; so the faster you can get air in and out of the system, the better. That being said, some of the simplest and easiest power gains you can get from your Mazdaspeed are from upgrading the intake and exhaust. We have seen peak gains of 25ft-lbs and 33WHP from only the CorkSport Stage 2 Intake and a CorkSport Racepipe.
Checkout the dyno sheet below.
Power and torque levels will be further increased if you install a full CorkSport Turbo Back Exhaust instead of just the race pipe section.
The catback exhaust section has proven to gain up to 14WHP while the downpipe section alone has proven to gain up to 21WHP. In the dyno graph below, the downpipe car had a CorkSport Intake installed at the same time as the downpipe (hence the 50hp gain).
If that wasn’t enough flow for you, we also offer 3” and 3.5” intakes for even more airflow into your turbo. Keep in mind though, once you get into those you will need to use a new tune to ensure your car runs optimally. But check out the extra flow you get!
Turbo Upgrade
The CorkSport Drop-In Turbo is a fantastic upgrade to the stock K04 turbo that allows your car to make more power on an equivalent boost pressure. It will work with any mods you already had on your OE Mazdaspeed turbo as the CS turbo is truly a drop in upgrade. With supplemental tuning, fueling, and supporting parts, you can push your Speed to its limits.
Stay Up-to-date with CorkSport
The Next Level
CorkSport also manufactures parts that can take your Speed beyond the parts discussed above. A short list of the parts with the best power gains can be seen below:
CorkSport Camshafts: Replacement cams with extra lift to provide increased power and torque across the entire RPM range.
Bigger CorkSport Turbo? Yes, there is one in development. See this blog post for details.
No matter what your goals are for this year, CorkSport is here to help you achieve them. Whether you just picked up a Mazdaspeed and are unsure where to start, or have been driving one for years and want the excitement you once had back, CorkSport has a part for you.
For many people across the USA, the days after Thanksgiving means one thing. To them, it’s the start of the Christmas season. The beginning of holiday shopping, pumpkin spice lattes, and the best home-cooked meals you can’t wait to dive into.
However, for a small select few group of individuals and teams, it’s a time for something completely different. It’s a time to see what you are made of, a time to put it all out on the table. A time where you know if the past year of planning, testing, and preparation are about to reward you greatly or tear you down completely. It’s the time when you hope to be able to stand up on a Sunday at noon and say proudly, “I survived the 25.”
For those lucky few (some call them crazy or stupid) the weekend after the Thanksgiving Holiday is what you might call a different type of holiday.
For the past 15 years, the 1st weekend of December is when some of the world’s best pro and amateur drivers descend upon a small city in Northern California known as Willows. Just on the outskirts of this quaint little city lies a little well-known road course titled merely “Thunderhill.” Now what makes Thunderhill so unique, well it’s probably the fact that this venue host the longest and most extreme endurance race in all of North America. For 25 hours straight; teams, coaches, drivers, and fans endure the rain, cold, dark, lack of sleep and more to try and make a name for themselves, and this year CorkSport did just that. Made History…
While attending the 25 Hours of Thunderhill is nothing new for CorkSport as we have spent the past several years supporting Mazda North America and their racing efforts with logistics, crew, and parts. This year was the first year where we entered a new team ourselves and brought our car, crew, trailer, and everything else you need to try and survive 25 hours of racing.
Sadly MNAO did not attend this year so it was up to us to make sure that the brand and name would make a forceful showing at the event and that is precisely what we did.
To start this whole thing off, we brought out our 2016 Mazda 3 GT. You guys are more than familiar with this car as Co-owner, and founder of CS Derrick Ambrose has been piloting this ride for two race seasons now in SCCA racing. We spent several weeks leading up to the event preparing the CorkSport Mazda3 for this daunting task.
.
We got extra safety equipment installed, upgraded our data acquisition package, optimized and engine tune for the 2.5L engine, and even installed some upgrade prototype pieces to have the car suited for the race.
Some of the CS goodies that were on the car during the run where our SRI, Cat-back exhaust, RMM, sway bar, and some prototype pieces like our aluminum skid tray and upgraded transmission engine mount. We needed the best parts we could get in there if we wanted to be competitive and make history.
No one has ever raced the 3rd generation Mazda 3 for this long in any endurance race. This car started off just like any other Mazda 3 and still retained a full OEM chassis, transmission, and engine. The engine internals where untouched and the transmission received a CorkSport LSD.
The team showed up on a brisk and cold Thursday morning, and we went to work. We immediately set up and got the drivers briefed.We got some practice in on Thursday, followed by some qualifying on Friday, all to be prepared to push this car to the limit for 25 hours. The team grabbed the pole position, and we were 1.5 seconds ahead of the next car which was fantastic. It showed we had the pace and, ultimately, the faster car. Fast forward to Saturday, and the flag drops green.
We had a great start and excellent drivers in the car. We struggled a bit through the night with consuming tires at a rate faster than we had anticipated and also had a few issues with how quickly we could get fuel into the car, despite the problems the team and the car pushed through the night. With just a brake change and tweak to the exhaust through the night, we maintained a good pace that ultimately got unwound due to the fuel issue mentioned above.
There was a Miata in our class that could get better fuel economy and tire consumption and slowly crawled there way up to lead during the night.
As the sunlight begins to break through, we are in a healthy 2nd place but a bit far off the leader, however, it does not worry us too much as we still have a shot at a win. Things were looking good till right about hour 22. One of our driver’s radio’s in and let us know he lost 4th gear (that’s not good). None the less we keep pushing knowing we have a spare transmission should we need to swap.
Now at hour 23 we get another message. “I lost 2nd gear” The transmission has now lost two gears, and we get a bit nervous. The car is still going and driving strong but our lap times do suffer from not being able to use all of the gears. After a quick powwow with the team, the decision is made to leave the car out on track and finish the race between 3rd and 5th gear.
With only 2.5 hours to go swapping out the transmission did not make sense as we were very secured in 2nd place. So we did just that and pushed on through, and you know what happened? We did it. While we didn’t get the P1 spot like we had wanted we did what no other SKYACTIV-G Mazda3 had done before.
We survived the 25. We proved the chassis and the platform, we pushed harder, longer, and further than absolutely anyone else has. The car was relatively unscathed, and minus the transmission, the vehicle performed excellently. All of the CorkSport parts did precisely what they needed to and outperformed all expectations.
We took the 3rd gen platform and solidified it as a competitive car and chassis that can be used and used well at all levels of motorsports.
So, what happens next?
The Mazda 3 made it back home and now lay dormant inside of HQ. We will be spending the next few weeks going through a ton of data and running through the car with a fine tooth comb.
We’ll take the transmission apart and see what her demise was. We’ll likely strip the SKYACTIV 2.5L down as well to check out what two years of racing looks like on her. The oil is already out of the car and on its way to the lab so be sure to stick around and see what we find out there.
Now one of the great things about this is what our success brings to the community. Everything we learned here can and will be applied to all of our parts and products moving forward. When we win, you guys all win. So, celebrate our accolades with us and wish us luck as we begin to prepare for the 2018 race season.
Do we tackle the 25 hours again next year? Do we show up with a turbocharger and more aero? And do we fight our ways to a P1 finish? You better believe I am going to try.
I’ve met a lot of amazing people thanks to my Mazda 3 Sport, but Yolanda Sampson (Instagram: @bluehalogirl) is the one I blame for this addiction we call “modding.” When we met, I hadn’t done much to my car yet, just a couple minor things like tinted windows and tinted taillights. She had a feeling I’d be into meeting some more like-minded locals and invited me to a meet. We got along like only two Mazda nuts could, and it was game over for me.
2015 was a good year here at CorkSport. We released a whopping 26 new products! With the New Year upon us, it’s not too late to snag some of our favorite new parts we released. Here are our top five picks for upgrades you still need in 2016.
Cool down your boost air temperatures without compromise with our front mount intercooler kit with either the small or large intercooler. Featuring all new piping for better fitment and performance, our FMIC comes standard with the high flow small core or the optional big core with crash bar. Our FMIC Kit features a new variable diameter piping that reduces boost lag and improves throttle response.
Introducing the first Plug-N-Play 3.5 Bar MAP sensor designed for the MZR DISI. The MAP sensor provides instantaneous manifold pressure information to the engine’s ECU. The custom injection molded body features the OEM style connection for a quick and clean installation; no adapter wiring harness needed! And we made it even easier for you by putting the necessary calibration scalars directly onto the MAP sensor, making tuning calibration a breeze.
Great sound, great looks, and great quality. It’s that simple when it comes to the MX-5 axle back exhaust. We’ve tested multiple designs to provide you with an exhaust that delivers top performance without the annoying drone so typically found in aftermarket exhaust systems. Our exhaust is manufactured from T304 stainless steel, CNC mandrel bent, and TIG welded for a perfect fit and long lasting durability. Only the best for your new Miata.
You know we’re all about that boost life. Experience a serious boost in performance with our drop-in Mazdaspeed turbocharger. It easily bolts in and replaces your undersized OEM turbo with no mechanical modifications. Yes, you read that correct. No mechanical mods. Our turbocharger comes with all the necessities you need for increased power performance so there’s no need to buy additional parts.
What’s on your mod list for 2016?
Cheers,
CorkSport
Five CorkSport Releases You Still Need to Buy September 21st, 2023CorkSport
