Keeping you up to date with the latest CorkSport Mazdaspeed news!
Category: CX5
Mazda Cx-5 has been available from Mazda since 2014 and CorkSport has been making performance parts since it arrived. Intakes, Exhaust, you name it we have it
Based on popular demand, we have developed a filter sock that will help fight dust and water spray from entering the engine. The CorkSport Mazda Air Filter Cover mod can help maintain the flow efficiency of your main filter and extend its service life.
Quality Materials
The Air Filter Cover is made from a polyamide fabric mesh and allows for good airflow while adding a layer of protection for your air filter and engine. The cover protects against dust, large debris, and light water spray from entering the filter media.
The small air filter sock works on 3.0, 3.5, & 4.0 marked air filters only
The large air filter sock works on the 4.5 marked air filter only
You can check your CorkSport air filter here:
If you don’t have a CorkSport specific intake, there is still a good chance your Mazda can enjoy the benefits of our air filter sock. Follow the diagram below to see if your air filter size matches:
Air Filter Sizes 3.0″, 3.5″, 4.0″
With fall upon us and winter just around the corner, now is the best time to add an extra layer of protection to your Mazda! Thanks for checking out the new air filter sock cover for your Mazda intake system.
Do you need to replace your swaybar end links and want an upgrade at the same time or are looking to adjust your sway bar to better match the factory position on your lowered car? That’s where the Performance Adjustable End Links come in and they are now available for the following models: 2019+ Mazda 3, 2014-2018 Mazda 3, 2021+ CX-30, 2022+ CX-50, 2014+ Mazda 6, 2013+ CX-5, 2016+ CX-9, and 2006-2007 Mazdaspeed 6. Depending on your specific application, both front and rear end links are available. The new CS Adjustable End Links build off of the wildly popular kit available for the Mazdaspeed 3 and carry over all the same benefits which are discussed below.
Why You Need End Links
Getting straight to the main advantage of the CS end links is their variable length. The CS end links offer ~18mm or 0.70in of adjustability. This results in an end link that can be up to 9mm longer or 9mm shorter when compared to the stock part.
If your car is lowered, our end links allow you to account for the change in sway bar position that occurs when you lower your car so it can be placed closer to its original position. When the sway bar is not positioned in the OE location it can lead to sway bar preload or binding which can have negative effects on handling. This also means that if you are planning on adding a lift they can help in the same way.
Quality Matters
The construction of the end links also maintains the same high quality as found in the current end links for the MazdaSpeed 3. The center section is CNC machined out of 2011-T3 5/8in hex aluminum to provide a large increase in size over the OE part while being easily adjusted to your specified length with a wrench. After machining, the center section then gets anodized in black to provide a finish that will help protect it from corrosion.
The included ball joints feature a sealed design to reduce the chance of water or other foreign material from gaining access to the joint. This allows the ball joint to provide a longer service life so that it won’t require any additional maintenance compared to the OE end links.
With the long new list of applications, you should have no problem finding a set of CS adjustable end links that will fit your Mazda. Be sure to head over to the product listing for your specific model for more info and pictures. As always, reach out if you have any questions about the end links for your setup.
The best and most complete intake system for your Turbo Mazda is finally available! Introducing the last piece of the puzzle, the CorkSport Performance Turbo Inlet Pipe. Combine the turbo inlet pipe with the CorkSport Short Ram Intake and Heatshield to create the complete intake system for the SkyActiv-G 2.5T engine found in nearly every model Mazda currently produced.
Skyactiv Turbo 3 Filter Inlet Engine Placement
Why does an upgraded turbo inlet pipe matter?
Power comes from efficiently flowing air in and out of the engine. When there is a restriction in the flow path, this causes a power and efficiency loss. Our goal was to design a new performance turbo inlet pipe that removes the restrictions of the OEM design, fits like OEM, and integrates perfectly with the already existing CorkSport Short Ram Intake and Heatshield.
The Turbo Inlet Pipe for the4th Gen Mazda 3
Here you can truly see the difference in size! While the shape of the CorkSport Turbo Inlet Pipe is…unusual…it’s for good reason. We invite you to check out the design blog for more in-depth details.
In a nutshell, we investigated the typical aftermarket design path of a metal pipe, but a 2.5 inch metal pipe was not good enough. We thought outside of the box to truly design the best turbo inlet pipe option for the community. We moved up to a 3 inch inner diameter system to maintain a continuous 3 inch inner area matching the MAF housing.
Full Image of the 4th Gen Mazda 3 Turbo Intake System
It’s the final piece in the CorkSport 4th GEN Turbo Intake System making it the best and most complete intake system on the market!
Turbo Inlet Providing Power Gains
So does it make power? Short answer. YES IT DOES! While tuning for the 4th GEN Mazda platform is still primitive and restrictive, we are able to see faster spooling and higher flow before the ECU hits the load limits. This tells us we are making more power with the addition of the turbo inlet pipe to the existing CorkSport short ram intake system. It also tells us there is more potential in the system once tuning develops further. We can promise, as tuning does develop, we too will further test and validate the benefits of the turbo inlet pipe system.
Power gains are great, but another key addition to the driving experience is unleashing the induction and turbocharger noise trapped by the factory air intake system. The CorkSport SRI and TIP free up a surprising amount of turbo noise when driving around and provides more induction sound under hard acceleration. The extra level of turbocharger noise is enjoyable when you want, but doesn’t get in the way when you don’t.
CorkSport Turbo Inlet Pipe Intake System Engine View
The Turbo Inlet Pipe Made Is Better & Fits Like OEM
Let’s talk about how its made; the material and manufacturing method used is another advantage over the OEM counterpart. The CorkSport TIP is Roto-Molded out of a high temp nylon to offer good strength and flow while retaining an OEM-like appearance. The CorkSport TIP also utilizes two silicone couplers which are reinforced so they don’t deform under vacuum high load. The silicone coupler that connects the SRI to the TIP gives a nice smooth transition between the two when compared to the OEM coupler, which has ribs that introduce unwanted turbulent air into the TIP.
The Best Intake For Turbo Mazda 3 Silicone
The outlet silicone that leads to the turbo features a barbed fitting to retain the valve cover breather and we also provide a silicone breather hose to connect the two together. This barbed fitting can also be used for an oil catch can if you want to add one in the future.
4th Gen Turbo Inlet Pipe Colors
The last component that is included with the CorkSport TIP is the mounting bracket. The mounting bracket is made out of 304 stainless steel and was designed to work with both the air-to-air intercooler system found on the Mazda 6, CX-9, and CX-5 and the air-to-water intercooler system found on the Mazda 3, CX-30, and CX-50. From the factory they have different mounting locations for the TIP so we decided to offer a single mounting bracket that will work with which ever model you have.
Hardware for the Turbo Inlet Pipe Hardware
As with most CorkSport performance products, this Turbo Inlet Pipe kit includes all the necessary installation hardware and color step-by-step installation instructions to ensure you have a quick and straightforward install.
The addition of the CS Turbo Inlet Pipe on your Turbo Mazda is a fantastic mod to further build upon your current CorkSport SRI. And Heatshield. At this time, no competitor intake systems have been test fit with the CorkSport Turbo Inlet Pipe.
Check it out below and be sure to contact us with any questions you may have, we will be happy to help!
The 4th GEN Turbo Inlet Pipe
The final component for the most complete intake system for your 4th Gen Turbo Mazda is finally available!
Every time you drive your Mazda you directly interface with four critical controls; seat, pedals, shifter, and the steering wheel. These control interfaces give you tactile feedback of your driving experience, so why not get the best feedback possible?
Take your driving experience to the next level
We introduce to you the racing inspired and genuine leather clad performance steering wheel from CorkSport Mazda Performance. We are so excited to bring this option to the community, to give you the opportunity to take your driving experience to the next level.
When we set out to develop a performance steering wheel for the facelift 3rd GEN Mazda 3 we had to define the major attributes needed: Performance, Style, Fitment. Without these what is the point?
View all Steering Wheels
Performance: While the OEM Mazda wheel has a nice shape to it we wanted to push this further with a more aggressive racing inspired style, deep thumb grooves, and the option for genuine leather or alcantara inserts. This gives you the choice to fit your style and the confidence on the track, autoX, or back roads. Sweaty palms? Don’t worry, the high contact area uses perforated genuine leather to help your hands breathe…we got you Fam.
Stay Up-to-date with CorkSport
View all Steering Wheels
Style: We’ll say this again, Mazda did a pretty good job on the higher trim level wheels, but if you have a lower trim level with the vinyl/plastic wheel it just looks MEH. You know what we mean. Step up your game with the CorkSport Leather Steering Wheel. It looks so good through the window, even better right in your face, and feels fantastic in your hands.
Genuine leather and/or alcantara, aggressive thumb grooves, and red stitching just bring the whole interior together and to the next level.
Fitment: This one is a BIG DEAL for two reasons.
EASY
When a part fits correctly it installs easily. We don’t want you to fight with the install or have to come up with some disconnecting hub or whatnot like other “racing” wheels. This is a 100% new casting that retains all the OEM connections and fitment.
SAFETY
While we do use true racing steering wheels with the quick disconnect hubs; these are only on our dedicated track cars with tons of other safety equipment. Your car is your daily and your weekend toy. We will not compromise your safety so we designed a performance steering wheel that retains all the controls and airbag like the OEM steering wheel.
Alright, let’s pull these three back together. Racing inspired performance steering wheel that uses genuine leather and gives you the option for alcantara inserts, form follows function because it looks great from the driver’s point of view or any point of view, and you get this without compromising your safety or losing your quick access features on the steering wheel.
Hold on…there is one thing…
If you have a heated steering wheel from the factory you will lose that feature. We investigated adding this feature (and we still can if there is enough demand), but damn it is really expensive. Let us know in the comments and drop us some info in this link if you really want a heated option. I WANT A HEATED STEERING WHEEL
Lastly, we want to mention this; this is can be a tuff performance modification to justify trust me, but once you lay your hands on the wheel and take your first apex you will be sold and wished your Mazda came with it from the factory. It’s such a visceral feeling that it’s hard to explain.
With that we will leave you with the obvious decision to make. Do the right thing for you and your Mazda.
We are happy to introduce the CorkSport Carbon Fiber Engine Cover for 2014-2018 Mazda 3, 2014-2018 Mazda 6 non-turbo up to 03/02/2018 build date, 2013-2017 Mazda CX-5, and 2016-2020 Mazda CX-3!
Personalize your look to match your build!
Add some much-needed flair to the engine bay of your Mazda in 10 minutes or less. Offered in two different REAL carbon fiber weave patterns with 4 choices of CS emblem colors so you can personalize your look to match your build. Read on for full details and check out the images!
The CorkSport Mazda 3 carbon engine cover spices up your Mazda’s engine bay with a fantastic 100% real carbon fiber. You have your choice of weave between a regular 2×2 twill weave or “forged” carbon for a little extra cost. The forged carbon was originally developed by Lamborghini and uses chopped strands of carbon instead of the traditional carbon cloth for a unique appearance. Both are finished in high gloss for a truly great look!
Stay Up-to-date with CorkSport
The Mazda 3 Engine Cover Fits Like OEM
Each CorkSport engine cover is designed to be a direct replacement for your OEM engine cover. We used an OEM cover when creating the design so you can be sure it will fit and look just like OEM. All OEM mounting locations were replicated and then securely bonded to the carbon. The covers sit right where they’re supposed to and don’t cause any vibrations or rattles!
Add some flair to your engine bay
We finished off the CorkSport CF engine cover with a custom billet aluminum “CS” logo badge. It offers a nice finishing touch that replicates the Mazda badge on the OEM cover. To give it your personal touch, four different anodize colors are available: blue, red, black, and silver. Each color looks great with the carbon background, whether you want a stealthy black look or bright red to match your car’s paint and your CS intake!
If you’re looking to add some flair to your engine bay and impress at your local car meet, check out the CorkSport Carbon Fiber Engine Cover. Be sure to check out the product listing for more pictures and don’t hesitate to give us a call with any questions, we’re happy to help!
