Those of you who are already driving the new 2014 Mazda 6 will be happy to see that we are releasing lowering springs to bring you improved handling and looks to your new ride. Read about the new release of the best Mazda 6 lowering springs.
The CorkSport Advantage
A 1.75” Drop Front and Rear for improving the ride while maintaining safe operation
An average increase of 7% in the spring rate while maintaining a comfortable ride
Crafted from high tensile strength spring steel for long-lasting quality and performance
OEM Finish to ensure lasting durability and rust resistance
Backed by CorkSport Limited 2-year warranty
CorkSport Service and Support Receive full-color installation instructions, all of the needed installation hardware with knowledgeable telephone installation support
The demand has been high for the Mazda 6, orderyours soon. Get your Mazda 6 ready to stand apart from the rest.
We’ve heard through the grapevine that some people think of CorkSport as a “Bolt-On” company. NO WAY! It’s often said that you need to go to XYZ or ABC or some other micro-tuner for big turbo (BT) products.
It’s true that we don’t yet offer a big MAF intake or upgraded manifolds and the like for the BT crowd. This is a matter of economics not passion or engineering capability. Fortunately for all of us, more and more Mazdaspeed3 owners are pushing towards 400 WHP and beyond. We believe there are enough of you out there to support some big time products. Before we get into those, let’s revisit a collection of our products that we’ve released in the last year that no other Mazda performance company can touch. Most can’t even check one of these parts off their list.
Brake Pads, Panel Filter, Toe Arms, Hood Struts, Coolant Tank, and many more…
No-one in this market innovates at the pace we do at CorkSport. No-one in this market comes close to releasing the quantity of products we do at CorkSport. Check out what’s in the pipeline* for our BT friends.
CorkSport Intake Manifold V1
CorkSport Exhaust Manifold
CorkSport 3.0” Big-MAF Intake
CorkSport Camshafts
We are also working on CorkSport 3.5” Big-MAF intake and CorkSport Fuel Injectors for MZR-DISI among many other projects.
We are a dedicated Mazda performance company. You’ll find no Ford, Subaru, BMW or other platforms on our website. Our profits go back into making more Mazda parts. That’s it.
You told us you want to go BT with CorkSport. We’re listening.
As always, we appreciate your business and feedback. Reach out!
Richard Harris
President
* Keep in mind that not all products in development make it to retail. Sometimes we develop a part and find there is no real value and abandon it – TMIC cold-pipe. Other times, the cost to launch a new part is such that we can’t hit a price point that you will accept.
We’re Listening… Big Turbo Products !! February 21st, 2018CorkSport
So if you want a unique look or a car color matching intake, the White Silicone option just might be for you!
Looking for an intake?? Looking for a sale?? We’ve got both!
We already know that the CorkSport Short Ram Intake is the best in the game, but what could make it better? How about a lower price for Xmas? If you haven’t noticed our price drop on the CorkSport Stage I Short Ram Intake, Stage II Short Ram Intake or Cold Air Intake for the Mazdaspeed 3, Mazdaspeed 6, and Mazda CX-7 then take a look!
Installation help is on the way!
We are constantly searching for ways to improve your experience with CorkSport. Many times we re-visit our parts to see what we can do to improve them; lately we are also starting to turn our attention to improving the instructions that our parts come with. You’ll notice the change starting with our latest products and also some of your favorites. We recently upgraded the instructions for all of our Mazdaspeed 3 intakes to fill them with more pictures and easier to understand steps. Here’s an example:
As you can see, the pictures are full color with easy to find call-outs of key items and steps. In addition to coming printed out with every CorkSport part, you will find them easy to link to on every product page and easily viewable on any computer, tablet or phone. Just one more way that CorkSport has your back!
Lower Prices, More Power, and White Silicone! December 17th, 2018CorkSport
With the news that has come out in the past few weeks about the next Mazdaspeed 3 and it being AWD. Takeo Mariuchi, the program deputy manager was quoted as saying “from a technical point of view it’s not difficult to install a four wheel drive system” for the next version. I took this as a non-committal response from Takeo to answer someone’s question. But in the interest of wanting to see a AWD Mazdaspeed 3 myself, I decided to take a look at the CorkSport 2014 Mazda 3 when it was up on a lift this week.
Checking out the rear knuckles you can see they are open in the middle which would make adapting rear axles to be pretty straight forward.
I took a peak at the rear suspension of the CorkSport Cx5 as well and it is setup the same. The next point which would have to be addressed is space for the driveshaft and transfer case for an AWD system.
Sure enough there is a larger amount of space at the back of the engine bay to clear a transfer case and drive shaft. The exhaust manifold looks to be the same from the CX5 AWD to give the clearance for needed systems.
In my opinion, the only thing standing in the way of this getting the green light is the bean counters looking at the past sales of AWD performance cars for Mazda. In North America, the 323GTX didn’t sell too well and the 06-07 Mazdaspeed 6 was not the biggest sales success either. Let’s hope they overlook those and give us enthusiasts the car we have always wanted.
-Derrick
Will There Be a New Mazdaspeed 3??? With All Wheel Drive??? September 27th, 2023CorkSport
With our fuel pump design complete (link to fuel pump blogs 1,2,3,4), we now turned our attention to the details. We wanted a coating to protect the piston and decrease friction during operation. After testing dozens of compounds, we settled on a very strong coating that is applied with a proprietary process. This process allows for an exceptional bond with the metal, lower static friction, and increases the surface hardness. Before applying the coating however, we wanted to make sure we had the best part possible underneath it. Imagine having an orange that is covered in titanium. The surface might be incredibly hard, but with no substance to back that up you will eventually lose the shape.
After choosing a very strong alloy for our internals, we then machine their tolerances to an incredible 6 microns! To make sure the tolerances are paired for life, we serialize the parts to prevent any issues and to track the life of the pumps. We then surface treat the pumps to achieve the alloys maximum strength; only after the maximum hardness is achieved do we apply our surface treatments to bring the overall durability to an even higher level.
Many companies would be finished at this point but, at CorkSport, our research has shown us that when a coating is applied it is very difficult to maintain a smooth surface. In fact, we found that the coating has many microscopic hills and valleys. There would be no reason for us to go through all the work of having incredible tolerances if we were just going to ruin them with an uneven coating. In order to correct this, the pistons are then re-machined back to their original single micron tolerance. The CorkSport Fuel Pump Internals are the lightest aftermarket kit on the market for faster response and decreased cam wear. At this point it may seem like we are flying this pump to Mars but we just wanted to make the best part on the market, and it worked.
Pump More Than Any Other Kit Available
All of this adds up to an improved pumping volume that is over 8% higher than all other pumps we tested and 50% larger capacity than the stock pump. When other pumps are losing efficiency because of their design or tolerances, ours is just hitting its stride. That difference in the real world is going to be higher HP numbers, safer air/fuel ratios and the ability to go that much further without worrying about your fuel supply.
Because of the increase in fuel we highly recommend that you get a new tune for your car we have made a combo deal to save some money here.
How to Buy the Best Fuel Pump Internals
Now that the cat is out of the bag we can let you know a few more things.
Our first batch is very limited and we want to give everyone that has been waiting a fair shot at getting one. We will release these parts for Pre-Order on November 1st. The Pre-Order will be limited to the first 100 paid orders or November 14th, whichever comes first.
The CorkSport High Pressure Fuel Pump internals include a collectable aluminum box with:
Full color instructions
Stainless Steel Installation Tool (That also doubles as a keychain bottle opener!)
Anodized Aluminum Installation Sleeve
CorkSport USB drive with Installation Video, Promotional Video and Other Bonus Material
The Pre-Order will go live on November 1st at 12am Pacific Standard Time and will remain up until the initial 100 orders have been placed. Unfortunately these are the only internals we will offer for 2013 so if you miss the pre-order you will have to wait until next year to get the best fuel pump upgrade on the market.
The Fuel Pump Finale… (Sort Of) January 4th, 2020CorkSport
