The New CorkSport Mazda 3 Rear Motor Mount

Feel like your SkyActiv-powered Mazda is lacking a bit of throttle response and driver feedback?

We hear you, that’s why we’re introducing the all new CorkSport Race Rear Motor Mount for 2014+ Mazda 3 and Mazda 6, as well as 2013+ Mazda CX-5.

CorkSport Mazda 3 Rear Motor Mount

Manufactured from 6061-T6 aluminum and anodized, the CorkSport Race RMM is strong, durable, and lightweight. What truly sets the CorkSport Race RMM apart from the competition goes to the 70a polyurethane. This RMM does not use polyurethane inserts that can loosen up and degrade. The 70a polyurethane is poured directly into the mount for a permanent bond with the aluminum body and bushing collar.

CorkSport Mazda 6 Rear Motor Mount

More than a handful of prototypes have been tested to ensure that the product arriving at your door is the very best it can be. We tested different durometer polyurethane from 60a to 80a (as well as different bushing sizes) to find the maximum improvement of throttle response and driver feedback without excessive noise, vibration, and harshness. Check out one of the prototypes below.

CorkSport Mazda CX-5 Rear Motor Mount

Now you might be thinking: “How does a motor mount improve throttle response and driver feedback?” In FWD vehicles it is typical for the engine to be oriented in a transverse layout. This means the engine is parallel to the axle centerline, whereas in a longitudinal layout (typical of V8’s and RWD vehicles) the engine is perpendicular to the axle centerline. Anyway, the engine/transmission applies a rotational force (torque) to the drive shafts, in turn rotating the wheels/tires forward.

“For every action there is an equal and opposite reaction.” – Newton’s third law of motion.

The amount of torque applied to the wheels is equal and opposite to what is applied to the engine itself, but what keeps the engine from just rotating? Enter the engine mounts. Unfortunately, the OEM engine mounts are very soft, so the engine is able to move and rotate substantially while driving. This makes for a very plush ride inside the cab, but sacrifices throttle response, driver feedback, and really the general driving experience. Replacing the RMM drastically reduces the amount of rotation the engine is allowed which in turn forces more of the engine’s torque to the tires sooner instead of just rotating the engine in the engine bay. This holds true for any action that affects the engine: throttle inputs, up-shifting, down-shifting…etc.

CorkSport Mazda 3 Rear Motor Mount

Improve your vehicle’s performance with the CorkSport Race RMM, and pair it up with the CorkSport Short Shift Plate and Shifter Bushings for the ultimate performance package!

-Barett, CS Engineering

Barett Strecker-01

So You Want to Go Racing in a Family Sedan?

CorkSport Mazda in NASA 25 Hours of Thunderhill Not too often do you get a chance to cage up your family sedan and “run what you brung,” but that’s exactly what Mazda and Robert Davis Racing (RDR) did in the 2013 NASA 25 Hours of Thunderhill. Mazda took three brand new Mazda 6 Skyactiv diesel sedans out to the track and ran them. There were a few on-track incidents in the 2013 race but nothing too serious. Mazda was lining up to run the cars again in 2014, and several things fell into place that allowed CorkSport to provide some additional power improvements to the cars. We outfitted them with a downpipe and exhaust made from 80mm stainless steel, a high flow intake system, an upgraded intercooler and piping, and some ECU tuning. This gave the cars more power to stand a shot at the podium in E1 with better fuel economy than the other class cars and more power than the previous year.

CorkSport at NASA 25 Hours of Thunderhill

Inside the group of three Mazda Sedans was a rivalry of the Mazdaspeed Guys (comprised of Mazdaspeed Motorsports employees) and the Dealers CEB (Crayon Eating Bastards), a group of Mazda dealership owners/employees. The dealers controlled cars #55 and #56, and the Factory Guys (Mazda Employees) had #70, all fighting it out for bragging rights. Before the race got going #70 hit a snag where a coolant line came loose and overheated a motor, which prompted a Thursday motor change.

By Friday the cars were all in good shape for qualifying. This went down trouble-free despite a giant rainstorm, as if it wasn’t hard enough trying to run a fast lap with 58 other cars out on the track in six classes— all of which had different speeds.

CorkSport Mazda parts qualifying

Thankfully, by Saturday morning the weather had cleared up, and the forecast predicted dry racing for the full 25 hours. This prompted us to get the three cars ready to run on slicks which were mounted up on the wheels and installed on the cars.

CorkSport Mazda parts ready for racing

Right at 11 am the flag dropped and started the longest race in North America. This was, needless to say, an adventure for the whole team. Several hours into the race, the driver of #70 reported that the car would not shift into all of the gears. It turns out the extra power was a little harder on the drive train in the higher gears, which removed the 5th gear from being functional. The driver decided to stay out and run the race in 6th gear until the fuel stop came up. That turned out to be hours later courtesy of the excellent fuel economy of the Skyactiv engine. The pit area was prepped for a transmission swap with a spare gearbox the team had brought with them. Unfortunately, this took the car out of any chance of being on the podium, but with endurance racing you never know what will happen! So the transmission change went ahead as planned.

At the first extended yellow flag session #55 and #56 reported a power loss in the cars. This resulted in a massive jam session to diagnose and fix what was going on with the cars. Since these specific cars live their lives on the track they did not get a chance to be tested with the new modifications at low speeds (AKA street driving speeds) which brought up an exciting challenge with the fire control systems in the cars. It took ~about 2 hours to sort out the problem, and we had the #55 and #56 back at full speed heading into the night.

Mazda Sedans drive into the night

The #70 was getting its final work completed with the transmission change and ready to head out onto the track again well behind the Mazda dealers in the #55 and #56 cars. Late into the night, after a driver change, we got a call in on the radio #55 had an on-track incident with another car in the E2 class, and sadly both cars had to retire from the race. This E2 class car happened to be leading the class which RDR was also fielding “Kermit,” the green RX8, in. Though the incident was unfortunate, as a result Kermit moved to the leader position of the E2 class.

Several hours later we got a call in from #56 of an off-track situation which required the car to retire from the race too. This put the #70 Mazda 6 in position to finish ahead of the #55 and #56 for total laps if its drivers could finish the race trouble-free. As the sun came up, the #70 car was running without a hitch, as was Kermit.

Mazda RX8 racing at sunrise

From sunrise until noon, the race for the two remaining cars was uneventful. At the noon finale of the race Kermit secured the win in E2 for the first time! Like in any race, there were things you learn and adjustments for the next time on the track. I want to give a huge thanks to RDR, Mazda, Mazdaspeed, the volunteer crew peeps , and Weldon for the guidance on my first time being a crew chief for an endurance race. Lastly, a big thanks to Ruandy from Pacific Northwest Life for the great camera shots—and to my family for letting me miss an entire weekend at another race.

-Derrick

Interested in any of the diesel performance parts we developed? Shoot an email to sales@corksport.com for more information.

Corksport Aluminum Crank Pulley for 2.0L & 2.5L SkyActiv Engines

Feeling like your SkyActiv powered Mazda isn’t getting the “shining” attention it deserves? Maybe you’ve already bought every CorkSport item you can, but just want more! I can’t blame you really; it’s a virus that all car fanatics fight.  So here’s fuel for the fire! Introducing the aluminum crank pulley for 2.0L & 2.5L SkyActiv engines!

Screen Shot 2014-12-18 at 1.54.58 PM

Manufactured from high-grade 6061-T6 aluminum, this precision machined crank pulley is sure to give you that extra level of detail you’ve been searching for. Plus it’s 100% designed and manufactured right here in the Pacific NW, USA.

Screen Shot 2014-12-18 at 1.57.41 PM

This crank pulley isn’t just for looks folks, it’s got bite too!  With a 68% weight reduction, compared to the OEM component, your engine is going to rev faster due to the lower moment of inertia of the rotating mass.  I can’t guarantee your bum will feel the difference, but your 2.0L will.

You may also be wondering: “The OEM component is steel, will the aluminum be strong enough?” Absolutely! We’ve been testing the component on an employee car for 2 months (roughly 2000 miles) without a single issue. The accessory belts put a very small, almost insignificant, amount of force on the pulley.  The real concern is the bolt that holds the pulley on, but we got that covered also, see below.

corksport-mazda3-crankshaft-pulley-isometric-vonmises-stress-psi-700x586

To be confident in the products we produce, we conduct FEA (Finite Element Analysis) on all applicable components.  In this case it is the bolt clamping force holding the pulley on the crank.  The crank pulley bolt is an M16x1.5 with a torque spec of 67-80 ft-lb.  For this analysis I used 79 ft-lb which creates a clamping force of 7557 lbf.  Looking at the color graph to the above, you can see that the maximum stress is ~12420 psi which is far below the material yield strength of ~40k psi.  So what does this mean to you? You can (but shouldn’t) torque that bolt down to ~250 ft-lb without worrying about your beautiful new pulley being structurally damaged, but you will have to worry about getting that bolt out next time, that’s your own problem.

Crank Pulley

Add some shine to your engine bay and just a little more pep in your step.  Keep an eye out for the product release in the near future! Offered in anodized black.  Zoom – Zoom!

Barett – CS Engineering

ABOUT_BLOG_General

Let’s Do This, Mazda: Mazda 6 Coupe, CX-3, & Mazdaspeed 2016

Let’s keep this simple. You want the juice, the news, the lowdown, the gossip on everything Mazda….

Well good news! We have some great rumors for you here, and a little dose of truth. Let’s take a dive.

Mazda CX-3

First up, the Mazda CX-3. This lightweight, compact crossover should be going toe to toe with the Nissan Juke and other compact SUVs. Rumor has it that it should be powered by the 2.0L SkyActiv, likely the same one in the Mazda3. To be clear, this little gem won’t have to be waited on for very long. The CX-3 is set to release next spring, and better yet, debuting at the LA Auto Show in less than a month. Yep, we should have our hands on this guy sooner than later!

CX5-Mazda-Release-CorkSport-Car-Show-Nissan-Juke

 

2016 Mazdaspeed

Then again, you probably didn’t come here for news on a compact crossover that has killer gas mileage, room, and the practicality of a sedan/suv/compact car blended into one. You’re probably here for this: the 2016 Mazdaspeed. Though there still aren’t any confirmed dates or models, we keep getting “insider rumors”. According to Motortrend and their “insider”:

“What gets added to the lineup in addition to those cars is the interesting bit… the company plans to focus heavily on development of niche products, or in other words, special editions.” 

Special editions? Sounds like Mazdaspeeds to me! Any other “special editions” you can think of? Nope. I’m sold. Motortrend also states that a 2016 Mazda 6 Coupe will be released (see their rendering below).

 

Mazda-6-Motortrend-Coupe-Mazdaspeed-2016-Release-Rumor-CorkSport

 

Hatchbacks

As exciting as a coupe is, we tend to be bigger fans of Hatchbacks, specifically hatchback Mazdaspeed 3’s. So what does Motortrend think we have in store?

Another important niche model is also planned for 2016: the much-anticipated Mazdaspeed3. This hot hatch will employ a 2.5-liter Skyactiv G turbocharged gasoline engine pumping out more than 300 hp and incorporating a new lightweight all-wheel drive system. To add even more spice to the company’s lineup, we can also expect to see Mazdaspeed versions of the Mazda2 and Mazda6.”

Wait, what? Mazdaspeed 3, Mazdaspeed 2, and Mazdaspeed 6? I’m all ears. 

But will it happen? Looking at Mazda’s past, they certainly have touched most of their smaller cars with the hand of Mazdaspeed. Protege, MX-5, the 3 and the 6 all have been turboed and “Mazdaspeedified” before, so doing the 3 and 6 again is a no brainer…

But the 2? I think it’s highly possible. Most likely, the Mazda MX-5 will get a Mazdaspeed version before any of the other cars, and then they’ll dump the same engine in the new Mazda 2. Why not?

Whatever Mazda decides to do, we’re pumped. Looking at the models they have cranked out in the past 2 years have been impressive and we are very excited for more models and specifically their “niche…special editions”.

Zoom-Zoom

-Spencer@CorkSport

Sources: Jalopnik | MotorTrend

Spencer Carson Written by Spencer Carson. Spencer is a car enthusiast and Mazda fan at heart. Whether enjoying the power of a modified Mazdaspeed 3, or driving top down in his 1992 MX5, he always enjoys getting behind the wheel. As much as Spencer loves driving, he loves helping out other Mazda owners even more. Whether helping at a local install day or heading to a car meet across the country, he loves chatting about Mazda and giving advice on how to get more Zoom-Zoom out of any car. 

Product Release – 2014-2017 Mazda 6 Axle Back Exhaust

CorkSport is happy to announce the release of our long awaited 2014+ Mazda 6 Axle Back Exhaust System. Designed by our engineers to be a simple, bolt on upgrade for the Skyactiv powered 2014+ Mazda 6. The dual tips with the CorkSport logo plates gives the Mazda 6 the missing piece to really make it stand out among the crowd. The exhaust note gives a pleasant tone which is not common with some exhausts on the market which are buzzy sounding. The exhaust features 65mm piping and dual resonators ending with 80mm double-walled exhaust tips constructed from 304 Stainless Steel.

2014-Mazda-6-exhaust

A review from Jerod a customer who tested out the exhaust raves “The exhaust is awesome! The tone is great and it really brings the car to life.  The sound is a nice growl at startup and turns into a snarling monster at full throttle.  At no moment does the sound become “obnoxious” like other lesser-quality brand exhaust systems… The exhaust is a beautiful sight to behold.  It transforms the rear end of an already good-looking car into an aggressive yet elegant cruiser!  All 10’s from me “

2014-Mazda-6-Exchaust-Complete

As with all of our CorkSport exhausts, the Mazda 6 axle back features mandrel bent, polished stainless steel T304 construction for corrosion resistance and a clean stylish look. It has a distinctive performance sound that is mild but noticeable at cruise and idle and a distinctive growl at wide open throttle and free rev.

2014+ Mazda 6 Axleback Exhaust tip


Want to hear how it sounds? Check out our video clip below:

https://www.youtube.com/watch?v=Edu2KOE3tOA


You may also like:
The CorkSport 2014+ Mazda 6 Axle Back Exhaust is available at https://www.corksport.com/corksport-2014-mazda-6-axle-back-exhaust.html