Tag: corksport

Garage days have been around for as long as the practice of modifying cars. Wrenching on your projects, some good company, hot food, cold beer — what could go wrong? Hopefully nothing, but that’s typically not the case in all honesty, especially in the Mazda game. Murphy’s Law truly takes effect, and what can happen usually will happen.

Coming from the Bay Area, where I was the main go-to tech guy, I usually had two to 12 Mazdas at my house on any given weekend. (How the homeowners association didn’t get mad, I will never know.) I’ve been around the block a time or two and seen what can go wrong on garage days. I’ve seen what turns a fun day into 20 trips to the hardware store, tools everywhere, missing parts, and the typical “What did I get myself into?” feeling.

If you have a big job coming up and you’re questioning whether you can do it, some of these tips may help you get it done faster and more efficiently, and ensure you have a good time — instead of pulling your hair out.

Tip 1: Preparation

Don’t wait until garage day to check the box. Always make sure you have the right parts and hardware in advance. Now I’m sure you’re thinking, “How could some people wait that long to open their shiny new parts?” Honestly, I agree. But some people toss the boxes aside and don’t open them until the day of installation. I’ve seen people go to put on that new part and discover they’re missing something they need. Get all the hardware taken care of beforehand.

Tip 2: Tools

Be prepared for different outcomes that may happen and have all the tools that you need at hand. If you’re lacking proper tools, I’d recommend working with a buddy who has a better collection. Having nice quality tools makes all the difference.

Tip 3: Rise and shine

Start early. Nothing sucks worse than nighttime falling with the car halfway apart (especially when you have work the next day and it’s your daily driver). If you can, plan your job to go over the course of the weekend so you’re less stressed and can take your time.

Tip 4: Plan for drops

Have a quality flashlight and a pick-up magnet handy. On a garage day, it’s not a matter of if but when you drop something important. There’s nothing worse than when that dropped part falls into the abyss or someplace you can’t reach. Keep a pick-up magnet for those annoying bolts. The flashlight is good for easily spotting shiny things, and for overall lighting during the job.

Tip 5: Really read the instructions

Thoroughly read up on the installation. Read the instructions. Read the forums and talk to some friends for tips. There is usually something helpful out there you may not have known already. For specialty jobs, know your torque specs and procedures.

Tip 6: Stay stocked

Stock up on brake clean, PB blaster, WD40, carb clean, gloves, or whatever else you might need beforehand. It’s annoying to have to stop what you’re doing just to go buy an item that was forgotten. Also, if you wear them, get plenty of gloves. Your hands will thank you at the end of the day.

Tip 7: Catch a catch can

Have something around to catch fluids. Occasionally, people get deep into a job and realize they have to disconnect a line they didn’t know they’d have to. It’s always good to have some sort of catch can. Especially ones that can be sealed off so you can dispose of it easily. This goes along with our first tip, but I’m mentioning it again because some people will overlook this.

Tip 8: Organization

Organization trays are awesome. Use sticky notes for trays or zip locks you can label to keep tabs on bolts and nuts for their component parts. This makes reassembly on a big job much faster.

Tip 9: Prevent scratches

Moving blankets or big blankets are amazing for preventing any scratches while you’re leaning over the hood. Also, blankets help to hold the tools you’re currently using. You can drape them over and attach them with masking tape to keep them in place.

Tip 10: Check your work

Once you’re all done, be sure to verify all of your work before starting the car. Verify torque specs, connectors, and the rest. After you start up, quickly check for any possible leaks, listen for odd noises, etc. For example, make sure no exhaust gas is escaping from the downpipe gasket.

I hope these tips are helpful one day! Make sure to follow the CorkSport blog for more Mazda modification tips and information. And, if these tips do come in handy, tag a photo of the finished product with #CorkSport on Instagram and show us your ride.

Cheers,

Brett

Over the past couple of months, CorkSport noticed that a handful of people — including a few guys here in the Washington and Oregon area — are doing engine builds over the winter. It’s very exciting to see more people raising their power goals and pushing the limits of the platform. As I continue to follow certain engine builds, I noticed that the question of a proper break in procedure always comes up.

We can all agree that making sure the rings fully seat themselves is the most important thing in the life of the piston, but everyone has a specific way of breaking in a newly built engine. Still, you may be looking for some guidance. Here at CorkSport, thanks to Master Mechanic and Technical Advisor Vincent Melon, we use a specific break in procedure we thought we’d share.

Life comes at you fast

Four months ago, I blew a quarter-sized hole in the notorious piston three that forced my hand — it was time to get a built bottom end. I learned a lot during this build process and, most importantly, learned what a proper break in procedure looks like. I wanted to make sure to list out the steps Vincent and I took to guarantee the engine would be solid when fully broken in so that we could help folks like you who might go through the same process.

Oil tips for breaking in your engine build

In our opinion, one of the most crucial parts of the break in process is choosing the correct oil to break in your new build. For people who aren’t sure which oil to go with, here’s what we recommend you run: Driven BR30.

Vincent has done a lot of research on this specific type of break-in oil and swears by it. This oil is super reasonable per quart, and you’ll need around twenty quarts by the time the break-in procedure is all said and done.

Burning the midnight oil

Once you have the oil you need, new plugs, and the engine put back together, it’s time for the crucial first startup. When you first start the car again, you will want to rev the car throughout the rpm range for about 15–20 minutes to get your coolant system and oil hot. This first step will work out any air bubbles in your cooling system. It will also keep any extra metal bits in the engine fully suspended in really hot oil. Once you’ve kept the rpms consistent for about 20 minutes, it’s time to change the oil. The next few steps are super easy to follow:

• Change the oil again at 400 miles.
• Change the oil again at 800 miles.
• Change the oil again at 1000 miles.

Make sure when changing your oil at these increments, you keep a close eye on what the oil looks like. If you do not see metal bits in the oil you are changing, you’re fine. If you do notice a continued amount of metal in the oil, make sure everything is running and machined properly.

During the first 2000 miles, keep your rpms above 3000 and avoid cruising at any certain speed or rpm for long periods of time. The most crucial part of this process is making sure to change gears a lot. You can get into boost, but we recommend that you give the engine about 1000 miles before you really start romping on it. Once you have reached your 2500-mile mark, you’re good to drive it any way you like, and you can go back to using whatever type oil you want.

Cheers,

Luke

While we prefer the smell of motor oil, the wafting scent of roses everywhere tells us it’s Valentine’s Day. If you’ve got a special someone, by this point you’ve bought the flowers and candy, made a dinner reservation, and detailed your Mazda, with a substantially lighter wallet telling the tale of your romance-fueled efforts. If not, what are you doing reading this blog? Get to work before before you end up demoted to the couch!

But for those who might not have a date set up, don’t worry. Your true love (your Mazda), will always be there for you. Here are a few ideas for how you can spend Valentine’s Day with your ride so you don’t end up sitting home alone handling your camshaft.

Dinner and a movie

Spending an evening in guarantees one thing: You’re not driving. And we know you — you’re happiest when you drive. So, we’re giving you a destination. Hop in your Mazda and go grab a burger or a slice. Afterward, hit the cinema and enjoy some kick-ass action. We recommend you check out “John Wick 2” and watch Keanu Reeves wreck shop on anyone and everyone that crosses him. Or, if you haven’t seen it yet, it’s time to check out “Fast and Furious” star Vin Diesel’s “xXx: The Return of Xander Cage.” If you happen to run into a cute, single lady at the theater, why not offer her a ride home?

Check out our ultimate driving playlist for music suggestions for the ride to and from the movies.

Leather play

You’re too smart to get roped into a screening of “Fifty Shades Darker” this Valentine’s Day, but that doesn’t mean you can’t enjoy a little fun with leather — by installing CorkSport’s Mazdaspeed 3 leather steering wheel.

We’ll opt for the soft, stylish feel of hand-wrapped and stitched leather on a racing-inspired grip any day. If you’re feeling bold, add a leather shift knob. Once installed, hold on tight. You’re in for a wild ride with these two.

Can’t get enough? We’ve got a leather e-brake handle, because braking safety is just as important as an agreed upon safeword.

Oil and massage

On this special day, it’s time to treat your baby to a little TLC. Dim the lights and break out the oil … then turn the lights back on so you can see what you’re doing. Give your whip an oil change and, if you really want to splurge on your Mazda, install a CorkSport SkyActiv Aluminum Oil Catch Can. If you want to be extra smooth, add a CorkSport Oil Catch Can Drain Valve Kit to your cart, so you can really be slick with the oil. Your ride and your garage will thank you. Then, bust out the loofa and the wax and give your baby the massage she deserves, rubbing her down from tail end to headlights.

These suggestions are sure to get your engine revving. Date or not, your Valentine’s Day will be an affair to remember. Treat yourself to a new part and have the night you and your Mazda deserve. Whether you spend the night modding or taking your ride to a late-night movie, tag us with #CorkSport in a photo so we can immortalize your Mazda romance on our Instagram feed.