2010-2013 Mazdaspeed 3 Leather Steering Wheel

	CODE	Material	Availability	Price
	CODE:Axl-9-342-12	Alcantara Inserts	Availability:In stock	$436.99
	CODE:Axl-9-342-10	Leather Inserts	Availability:In stock	$379.99

Take control with the CorkSport Performance Steering Wheel for the 2010-2013 Mazdaspeed 3 and 2010-2013 Mazda 3. Add some style to your interior and some confidence to your driving with this performance leather steering wheel. Hand wrapped and stitched around a racing inspired grip design, the genuine perforated leather is plush and comfortable for daily driving and spirited street driving. Designed to be an OEM direct replacement, the CorkSport Performance Steering wheel is a simple 30 minute installation. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

2010-2013 Mazdaspeed 3 and Mazda 3 Steering Wheel Video

The CorkSport Advantage

OEM Fitment

Designed with the customer in mind, the CorkSport Performance Steering Wheel is a direct OEM bolt-on replacement. No modifications or stitching required and it retains the OEM covers, buttons, and airbag.

Performance Design

The racing inspired grip design features aggressive thumb grooves, flat bottom, and a thicker ring giving you confidence in any driving situation.

Style & Comfort

The CorkSport Performance Steering Wheel uses high quality genuine leather that has a slight texture and plush feel. Perforated leather is used in the high contact areas to reduce the chance for clammy hands.

Only available in all black.

upgraded Mazdaspeed 3 steering wheel replacement

New Manufacturing

The CorkSport Performance Steering Wheel is not a stripped and re-wrapped OEM steering wheel. Each wheel starts with a brand new casting of the center section and ring.

ALCANTARA

The CorkSport Performance Alcantara Steering Wheel option is inlaid with a soft sued-like material referred to as Alcantara. Giving a more luxurious feel to your CorkSport Steering Wheel.

Additional Features

Compatible with: 2010-2013 Mazdaspeed 3 and 2010-2013 Mazda 3
Hand Made Product: As with any handmade product, there will be slight variances. All products are subject to a quality inspection before they are deemed acceptable and safe for the customer.
Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Your CorkSport Leather Steering Wheel

It will take you 30 minutes to install the CorkSport Leather Steering Wheel with our easy-to-use instructions.

30 Minute Install Time

2/5 Difficulty

2-Year Warranty

No CEL

I don't love a single interior mod more than this steering wheel. I love the feel of the wheel, the craftsmanship, and the red accents that tie it to the rest of the interior. I have had mine on for over three years now and it still looks good as new! Do yourself a favor and BUY THIS WHEEL!

Jaclyn10/23/2024, 10:36 AM

Got this wheel basically new second hand, and I wish I would have spent the money earlier and got it years before. It makes the car so much more enjoyable and engaging to drive. From the bolsters to the flat bottom, the car is easier to steer and control in spirited driving or normal.

Swapping out the worn, shiny leather oem wheel with this softer, thicker wheel is a perfect OEM+ fitment and option. It still looks the same as the day I got it a few years ago with proper care. You’ll enjoy this upgrade whether on a stock car or heavily modded.

Zach Nieman08/30/2024, 11:58 AM

This steering wheel has an incredible feel, your hands just sit perfectly in it. We have one also on our 2018 Mazda 3, and we cant wait for the 4th gen wheel! This product completely changes the driving experience!

Brandon Winkle02/27/2024, 01:59 PM

Finally pulled the trigger on this, with the Alcantara inserts, and let me tell you, this is one helluva nice wheel. My original on had started to disintegrate, getting sticky and looking pretty gross. I tried to clean the original, and ended up just having to put one of those awful steering wheel covers on it just to be able to drive. That night, I ordered this wheel.

Installation was very straightforward. It took me maybe 20 minutes, just reading the instructions off of my phone. Nothing too complicated at all, just pay attention and don't skip disconnecting your battery.

What a world of a difference this wheel makes. It's a whole new connection to the car. Along with the weighted shift knob, new shifter bushings, and short-throw shifter kit, she feels like a brand-new car!

I'm not sure about the layout of the grips just yet, the lobes are at 10 and 2, and I'm solidly in the 9-and-3 camp, though the wheel feels good there, too. The Alcantara is a worthwhile upgrade, if you can stomach the additional $60. Feels so nice when cruising on the freeway, and when the wheel is sliding through your hands when coming out of a casual turn.

$460 is a lot of money, but in this case, it is absolutely worth it. The quality of materials, build, and design are all top-notch.

The "added room at the bottom of the wheel for knee movement" is patently false, though. It's literally physically impossible But it looks cool as hell, and the straight sections are a nice change-up from the all-round OEM wheel.

Matt09/15/2023, 08:53 PM

I completely under-estimated the benefit of a new wheel. Incredible quality and very affordable. I can't prove this, but pretty sure it also adds 10hp (feels like it at least).

Blake12/13/2021, 12:12 AM

Perfect in every way. Super easy install, you will thank your past self.

David Martin08/28/2021, 02:45 AM

This steering wheel is absolutely bad a$$! Install was a breeze, took maybe an hour at a chill pace. First off the looks puts the stock wheel to shame. Second the ergonomics, the grip, the feel and the quality will blow you away. Completely enhances the driving experience like you wouldn't believe! Stop thinking about it and buy this wheel, truly a must buy for all owners! Thank you CS!!!

Jose Dejesus02/19/2020, 07:54 PM

The installation guide is fantastic and the process is straight-forward. I think it is nearly impossible *not* to break the horn harness clip on the airbag module when removing it. I replaced it with a neatly trimmed zip tie.

Initial impressions...I like the thicker cross section, and the quality materials make driving feel more 'special' than the OEM wheel. Square bottom removes any possibility of thigh bumping upon entry or footwork impediments while driving.

There are a few key differences from the OEM wheel that warrant mentioning:
1) It is less comfortable to twirl the wheel with the heel of my palm while parking, mostly I think due to the flat bottom. I used to palm the wheel at the bottom edge, but now that doesn't work very well. Trying out a two-hand push-grab method, but it is a lot slower.
2) There are no finger grooves on backside of wheel. Not a complaint, just makes the wheel feel different.
3) There is no groove for my fingertips on the back of the 9 and 3 o’clock spokes, which was my favorite grip position while cruising.
4) I am not a huge fan of the 10 and 2 o’clock meaty-grip positions, but they are growing on me.
5) The CS wheel is so thick that I cannot see all of the turn signal indicators in my preferred driving position. I adjusted the wheel position to compensate.

But these are just observations which result from changing the one thing you use in a car 100% of the time. A great product, and highly recommended.

CA_MS301/21/2020, 08:35 PM

First of all I want to say thank you to Brett for giving those words of encouragement. You didn't have to do that but I'm very appreciative you did. I am an Army National Guard veteran and the past 3 months have been really hard to deal with emotionally and physically. Thank you Brett for your caring words. Now for the wheel, the wheel is definitely a huge improvement in difference and feel and adds more "sport" to the drive overall. I like the 9 and 3 grips and holding the wheel in cruising mode (8 and 4) feels really good too. Only thing I have to say that might be considered negative is the wheel looks slightly bigger than the stock wheel and I was thinking that the wheel might be a tad smaller in diameter before purchasing. Also, this maybe my eyes playing tricks on me but it looks like the left bottom side of the wheel looks slightly rounder than the right bottom side. The right bottom side looks more angled aggressively down. Like I said, maybe it's just me. Anyways, thanks again Corksport for providing quality products.

Robert Myers01/21/2020, 07:27 AM

Just installed. Great product, but a couple things to watch out for. Go slow removing the black retention clip that is on the wire with the white connector on the back of the airbag. Also one of the “2 screws with a different thread pattern”, that secure the buttons, did not have any threading in the new casting, the other side was fine.

Ed Q04/28/2019, 02:16 PM

← Prev

12 3 4

Write a review

Will this fit 2010 cx7?

Asked by mikey | 03/29/2022, 08:02 AM | 1 answer(s)

Does this steering wheel fit my 2015 Mazda5 7-seater MPV? The outlook is just the same.

Asked by Jason | 02/17/2022, 06:23 AM | 1 answer(s)

I’m looking for a steering wheel to fit my 2013 MX-5 Grand Touring manual transmission.

Asked by Mark Wurtmann | 11/05/2021, 04:58 AM | 1 answer(s)

I have 5 questions. 1, Is it possible to deliver the steering wheel to Japan? 2, Is it possible to insure at the time of delivery? 3, Will the stitch color be red? 4,Where is the country of origin? 5,Axela (Mazda3 BL) for Japan. Is it compatible with grades with paddle switches?

Asked by TAKESHI MORI | 01/13/2021, 03:42 AM | 1 answer(s)

I have a 2012 Mazda 3 MPS. In Australia is this compatible being a right hand drive? As this is designed in the US?

Asked by Carly Monaghan | 02/01/2020, 11:54 PM | 1 answer(s)

What wheel would you compare it to in terms of feel? My friend has a 2018 Golf R with suede sections on the steering wheel, at 3 and 9 o'clock. Is this wheel like that?

Asked by Jarvis D | 10/13/2019, 09:38 AM | 1 answer(s)

Is this wheel heated. I have a Mazda 3 2018, and that wheel is heated.

Asked by marco | 06/26/2019, 10:15 AM | 1 answer(s)

I noticed this question has been asked before but no answer yet. This will fit to 2012 Mazda 3 auto trans with paddle shift??

Asked by Juan Palomino Albirena | 05/01/2019, 03:00 PM | 1 answer(s)

Will this fit to a Mazda 3 2012 2.5L auto transmission with paddle shift

Asked by Juan | 05/01/2019, 02:37 AM | 1 answer(s)

Is there anyway I can get one without the CS letters on the bottom right?

Asked by Luke | 04/26/2016, 02:54 PM | 3 answer(s)

Do u offer any sort of trade in program for those that have the original all leather Corksport wheels that would like the Alecantra upgrade?

Asked by Dustin Mase | 05/24/2018, 07:43 AM | 1 answer(s)

Will you be making this with a blue stitch?

Asked by Mel | 03/22/2018, 08:54 PM | 1 answer(s)

will this fit a regular mazda 3, or is it a speed3 specific fit?

Asked by jared | 03/21/2018, 11:44 PM | 1 answer(s)

Will this fit a 2014 Mazda5 GT? My steering wheel is basically the same layout as the 2013 mazda 3. I am wondering if i can use this in my mazda 5.

Asked by solaide | 02/25/2018, 07:35 PM | 1 answer(s)