Improve your shifting experience with the CorkSport’s leather shift knob for Mazdas and Mazdaspeeds. Weighing in at 320 grams and wrapped in high-quality black leather, our shift knob flows through the gears seamlessly and feels great while doing so.
Each shift knob starts by being embroidered. It is then hand wrapped and stitched, giving it an authentic touch. Once installed, it increases the luxury vibes of your vehicle.
The CorkSport Advantage
Weighted performance: Weighing in at 320 grams, the our shift knob improves gear changing smoothness, while providing a more connected feeling to the transmission.
Construction: Made from Delrin plastic for an excellent grip experience, whether you like to shift with an open palm on top of the knob or cup it from the side.
Craftsmanship: Hand wrapped and stitched in genuine leather, the CorkSport shift knob stands up to the daily use of driving.
Compatibility: The CorkSport shift knob works with with all manual transmission, Mazda models from 1989 on up.
Beefy: 40 grams heavier than the 2nd gen Mazdaspeed 3 OEM knob and 58 grams heavier than the 1st gen Mazdaspeed 3 OEM knob.
Designed in the USA: Engineered in Vancouver, Washington.
Superior CorkSport service and support: Includes a 2-year limited warranty, full color installation instructions, and all necessary components. We provide knowledgeable telephone support at 360-260-2675.
How To Install CorkSport Leather Shift Knob
It will take you an easy 5 minutes to install your new shift knob.
So first I'd like to say this is the third product I have purchased from Cork Sport and each of them have come fast and are high quality. I didn't think that swapping out my shifter knob would make a big difference, but it made a huge difference. Feels great in my hand and shifts are a lot smoother.
The customer service is awesome too, I received a handwritten card thanking me for my purchase and a necklace for St Patrick's day. I know that's a little cheesy but that speaks volumes for there customer service
Victor02/23/2018, 03:52 PM
One of the first accessories I bought, mainly because of cost, this shift knob was a harbinger of the awesome quality that was to mark every CS mod I purchased. I was surprised at the weight of the unit, but it was a snap to install and has become part of the interior of my Speed! Great accessory!
Pastor Dave Poedel12/26/2017, 07:21 PM
I got myself one of these knobs as well as a set of shifter bushings for my '12 Speed3 and what a night and day difference it makes! The shifter bushings made my shifts feel more direct and sharp, combine them with this knob and it's now my perfect shifter. The knob itself is very nicely weighted, it makes my shifts feel balanced and smooth. Great for daily driving and brillant when your going for it. Quality is excellent for a hand stitched piece and the CS logo embroidery looks sharp, I also appreciate the colour matching to give it a clean look that matches the Speed's interior design. Since upgrading my RMM, bushings and shifer knob on my Speed3 to Corksport parts my car has a night and day shifter feel. It's the perfect feel for my taste!
Andrew08/03/2017, 12:07 PM
I was a little concerned when making this purchase because the ND MX5 comes stock with a 300 gram shift knob. I received the package quickly. Easy instructions and a small CorkSport sticker was included. Installation was a breeze and the red stitching matches the stock shift boot. Quality of the shift knob is excellent. Feel of this shifter in my hand is excellent and is much better than the stock "ball" shaped shifter. Because of the weight of the shift knob the feel of my shifting is not changed and in fact it feels better due to the better shape. I am extremely happy with my purchase and would recommend this shift knob to anyone who asks me.
Keith O02/16/2017, 10:58 PM
Nice product, feels very smooth. I was planning to buy the oem for my 2003 Protege5, but CS's works great! Thx CS!
Luis Rivera08/24/2016, 10:22 AM
very nice shift knob......high quality.....feels better than oem....heavier.....gears go in smoothly......high quality leather beautiful stitching,matches great with stitching in my car....highly satisfied! if you ever need to replace oem and dont want to pay$349.....and at the same time want a better quality knob look no further...not to mention you keep $249 in your pocket to go out Friday night and treat your buddies to beers!
Tomas Quiles07/20/2016, 07:12 PM
Love the shift knob, the leather is beautifully stitched. And the red stiching was a great touch to help it match the interior, it's heavier than oem but not as heavy as my old 420 gram blox shift knob which is perfect. Shifting it smoother and the grip is really nice. And best part is in FL heat it doesn't get as hot as metal shift knobs. Thank you corksport
Jose Robert05/21/2016, 12:49 PM
Awsome shift knob, very good quality. Together with CS shifter bushings and short shift plate, it takes shifting feel to completely another level!
Adam Mendelewski02/24/2016, 05:38 PM
Installation takes less than 5 minutes, and that is with a smoke and beer break. Knob is heavier and beefier than stock. It is not a dramatic difference, but shifting is smoother.
Chris Schraml10/30/2015, 12:04 PM
I've had this shift knob installed for about a week now. I love it! It's just a bit heavier than stock so my shifts aren't any slower but at the same time doesn't require as much effort as the stock knob. The form is exactly what I wanted as well. The only downside is it doesn't quite reach the shift boot. It still turns but it's really tight so I'm not sure if it's just stripping the threads or if there is still room for it to go down further. Either way it's a very small gap that you can't see as much as you can feel.
Benjamin Jacob09/21/2015, 11:47 AM
Nice shift knob but no silver stitching option. If it did it would be 5 stars.
Frank05/31/2015, 08:39 PM
Awesome, no nonsense shift knob. Weight is perfect, texture to the leather is smooth and supple while providing grip when you need it, no stitch bite. Natural feel when shifting from either the top or side.
By far the best knob I've tried for my 3 and it's ended the search.
Evan Worley04/16/2015, 11:14 AM
Feels great with your palm resting on top or pistol gripping it. Weight is perfect, the look it matches the interior perfectly. Everyone that drives my car wants one.
The only thing that could make it better is showing the gear pattern.
Alex Watson04/06/2015, 05:07 PM
It has been a while seen I was looking for a shit knob that would satisfy my taste but nothing convinced me until this new corksport product came out. I bought it for my mazdaspeed 3 and it feels and looks awesome! The red stitching makes it look very sporty! great match with my red and black interiors.
Shifting feels more pleasant!
For those who are questioning about the quality of the leather and it's stitching, the quality is outstanding. One thing is looking at it in the picture, another is having the feel of it during shifting. Like always Spencer and the guys at corksport are always willing to clarify any questions and help you with any product. So if you are looking for a great shift knob for your mazda don't look at universal shift knobs or other brands, this is the product for you, trust me! cs specially made it to be able to thread into the oem shifter which is great because the majority of the shift knobs on the market are with plastic caps and allen screws which increases the chance of damaging the oem thread(it happened to me with a sparco shift knob)
Once again thanks corksport guys for thinking about our mazda platform and putting dedication into such excellent products. Thumbs up!
Eliezer Perez02/27/2015, 05:44 PM
I bought this for my 2008 mazda3 to replace a very worn shift knob. Huge improvement. And I love the clásico look.
Robbie02/26/2015, 02:25 PM
I bought this for my speed 6 over the other shift knob keeps it looking clean and shifting between gears is much smoother!
Hey corksport, the way your body/trim parts y'all make all look amazing and the fact that you specialize in mazdas makes your company my go to place to treat my speed3 with your goodies but I do have one recommendation with the lettering on mudflaps, floor mats, engine covers, etc. To have mazdaspeed lettering in the kind of way the 2nd gen OEM floor mats are written out with a smaller CS logo to indicate it's a corksport part above or underneath the mazdaspeed logo, if you did that to your mudflaps and engine covers/heat shields where you would mostly see mazdaspeed but still show off that it is in fact corksport would provide pleasing aesthetics, or if y'all would provide custom options for detailing on certain products to open a whole new customizable revolutionary direction to the mazda/mazdaspeed.
Asked by Joseph Baker | 02/05/2018, 06:01 AM | 0 answer(s)
You should definitely make this in blue. Your aluminum shift knob comes in blue, right? Do you sell a lot of those? The Skyactiv guys would love it in blue also. To match the gauges and the blue LED backlighting on the dash screens.