We are excited to announce that the CorkSport Mazda 3 80mm Cat Back Exhaust is ready for your AWD 2021+ Mazda 3 and CX-30. We have gone through multiple iterations of the CBE during its development to ensure it meets all of our requirements. The CS 80mm CBE replaces your factory mid-pipe and muffler section to provide extra sound and power from your Mazda. The large 80mm diameter pipe adds a deep and refined tone and a more aggressive note once it gets up in the RPM range.
Note: Review the Advisory Notes on our product page regarding 2019+ AWD Non-Turbo Models.
The wait is over, better handling for your GEN4 Mazda is here! Introducing the CorkSport Rear Sway Bar for 2019+ Mazda 3, 2020+ Mazda CX-30! Reduce understeer, improve your handling feel, and reduce body roll by adding the CS sway bar to your Mazda. We went through multiple designs to ensure the right stiffness to get the handling gains you want, without excess oversteer or effects on ride quality. Read on for full details!
If you are a car enthusiast, own a new Mazda utilizing the awesome SkyActiv-G Turbo Engine, and have been searching the internet for performance parts then you probably know that CorkSport has been deep in development for this new Mazda platform. Specifically, CorkSport has been working on the last piece of the intake system puzzle, the Turbo Inlet Pipe.
This is the black plastic “tube/pipe” that connects the Short Ram Intake System to the turbocharger inlet. While the SRI System adds some great turbo noises and power gains to the Sky-Activ Turbo, there is still more opportunity for additional performance and sound improvements. This is where the new CorkSport Turbo Inlet Pipe steps in.
Enjoying your 4th GEN Mazda 3 but wanting to change up the look? Introducing the CorkSport Performance Spoiler for 2019+ Mazda 3 Hatchback. We went for an OEM+ design that incorporates the great fitment and lines of the OEM aero kit spoiler but in a much more aggressive package. Taller, longer, and with an upturned rear edge, the CS spoiler add some much needed sportiness to the look of your 3. Available in multiple finishes to suit your budget and build, the CS spoiler is a great next mod for your build! Read on for more details and check out the product listing here to purchase.
We like the OEM spoiler but were disappointed at how insignificant it looks when installed, especially when paired with the fairly aggressive OEM front lip & rest of the aero kit. The CorkSport Spoiler takes design cues from the OEM aero kit spoiler however, the design is unique to CorkSport. We started from scratch and polled the community for design opinions before settling on a final design that is both higher off of the rear hatch than OEM and extends further rearward than OEM. The design is finished off with an upturned rear edge for a great “duckbill” style look which is aggressive without being too much. You’ll be turning heads, especially when paired with CorkSport Lowering Springs and a nice set of wheels!
Fitment was equally important as aesthetics when we designed the CS spoiler. We 3D scanned an OEM aero kit wing to get the exact mounting surfaces and edge profiles so that the CS version fits just as good as OEM. We use the same mounting locations as OEM as well. This means no drilling if you’re switching from OEM aero kit to CorkSport spoiler. If you do not have the OEM spoiler you do have to do some drilling, however, Mazda pre-marks the holes for a relatively easy install! By using the same mounting locations and more adhesive mounting tape than OEM, you can be sure your CorkSport spoiler won’t be going anywhere!
The CorkSport Mazda 3 spoiler is offered in three finishes so you can choose what is best for your build. Each option uses a fiberglass base with different top layers. Regular woven carbon fiber, forged carbon fiber, and basic black fiberglass are each available. The carbon fiber options feature a UV resistant epoxy top coat for great protection from the elements and a mirror like finish. The full fiberglass option comes in a satin black coat with some light scratches and will require some finishing. We recommend some finish sanding and a final layer of paint or wrap. The shape is the same for each unit however the purchase price varies so you can really choose the best option for your build & budget.
Finally, each CorkSport spoiler comes with all the hardware and accessories needed for installation. This includes mounting bolts, washers, mounting tape, and rubber washers for waterproofing. We even include new replacement OEM Mazda clips that almost always break with removing the upper trim panel on the hatch! All of this comes with full color install instructions and great customer service & support!
So if you’re ready to take your GEN4 build to the next level, check out the CorkSport Performance Spoiler for 2019+ Mazda3. We think it’s what the OEM spoiler should’ve been and you will not be disappointed! Don’t be shy to contact us with any questions!
Are you looking for an exterior mod that will freshen up the look of your first gen Mazdaspeed 3? Well if that’s the case then the Carbon Fiber Spoiler is the perfect part to install on your build. The Carbon Fiber Spoiler retains the OEM look with the much-appreciated addition of carbon fiber. Keep on reading below for more info on the carbon spoiler.
Since the Carbon Fiber spoiler is based off of the factory Mazda piece, installation is a breeze and requires no drilling or other modifications to the hatch. We have also pinned the third brake light so that it can reuse the OEM connector with no modification to the harness needed! The Carbon Spoiler also comes with all the necessary hardware to install the spoiler so you can be back on the road in no time. Fitment with other add-on parts such as spoiler extensions or gurney flaps should work with the OEM style shape, however, we have not tested it. The same goes for GEN1 Mazda 3, the CF spoiler should fit, however, you may have a different 3rd brake light setup and/or have additional holes from the smaller Mazda 3 spoiler
The Mazdaspeed Spoiler features a fiberglass base that is then topped off with a layer of carbon fiber on the top side of the spoiler. The underside of the spoiler is finished in gloss black and the whole thing is then coated with a UV-resistant epoxy resin to provide a mirror-like finish and the necessary protection from the elements. The two halves come together on the rear edge so there is a small seam, however, once installed, the seam all but disappears!
If the CS Carbon Fiber Spoiler is a mod that you would like to add to your build, then head over and check out the product page for additional photos! Also, feel free to contact us with any questions you might have.