We know you’ve been eyeing the CorkSport Axle Back Exhaust System for your 2016+ Mazda ND Miata, so let this catch your attention even further! CorkSport is proud to announce the release of the Cat Back Exhaust System for the 2016+ Miata!
Every great exhaust system begins with two main ingredients:
1. High quality materials
2. Exceptional manufacturing
Here at CorkSport, we realize that without these two key factors, no matter the design, a great product is just not attainable. Every CorkSport exhaust system is manufactured from T304 Stainless Steel and precision bent using CNC mandrel tube benders. The mandrel benders maintain a consistent diameter throughout the many bends that exhaust systems may have. Then, all necessary welds are performed with TIG welding to insure a long-lasting and rust free connection.
The fun doesn’t stop there! The exhaust system needs to sound and look great also. The CorkSport Cat Back Exhaust System features two high-flow resonators to reduce and eliminate unwanted drone without restricting the exhaust flow. Speaking of flow, the exhaust system is constructed from 60.5mm diameter tubing vs the OEM 54mm to further improve flow and provide a deeper exhaust note.
And for the “cherry on top,” the CorkSport exhaust system features dual double wall exhaust tips to maintain the OEM look, but with a higher level of style. Wake up your Miata today with the CorkSport Performance Exhaust System!
Wake Up Your 2016+ Miata with Our Cat Back Exhaust System June 22nd, 2017CorkSport
Whether you want a lower center of gravity for better handling or you want to get rid of that ugly wheel well gap, lowering springs are a great buy.
From hitting the track on the weekend to a spirited drive through the countryside, CorkSport lowering springs are the upgrade you’ve been looking for. By adding our lowering springs, you’re lowering the center of gravity. This allows the car to stay more planted to the road.
One of the biggest things to note on the stock suspension is how far upward the suspension travels when hitting bump. It can make the car feel like it wants to lift off of the road, depending on how fast you’re taking corners. Lowering springs help correct the car’s suspension travel when you hit a bump in a turn.
Lowering springs also have about 25% increased stiffness. For the Mazdaspeed platform, increased stiffness in the rear is a must. Mazdaspeeds like to squat pretty hard when hitting full boost, so any way you can manage to stiffen up the rear is a great modification for your car.
Adding lowering springs also gives your baby amazing eye appeal and a much more aggressive look. Whether you drive a MS3, MS6, Mazda 3, or MX-5, lowering springs will get rid of that ugly wheel well gap. If your model wasn’t just mentioned, springs will still work for you too! The result is a Mazda that carries a much cleaner look and gives you the ability to take it to the track if you want to.
Some people want to drop their Mazda as much as possible, and some don’t. CorkSport lowering springs don’t deliver a super aggressive drop. If you’re not interested in scraping your front bumper on every road bump, the CorkSport lowering springs have the right drop for you and provide the increased handling capabilities you’re looking for.
Imagine driving down the freeway at cruising speed and someone decides to change lanes too fast, causing an accident. This is one of the worst things that could happen on the way to work, school, or a friend’s house. I’ve seen this happen to many of my friends, and the most important thing is that everyone was able to walk away without being hurt.
Once the dust has settled, you have an imperfect “race car” to take care of. You have to decide if you want to fix the car, or trash it and move onto the next project. As long as the car isn’t totaled, my vote would be to repair it and keep your baby.
What’s the next step now that you’ve decided to repair your vehicle?
You have two options to get your baby back up and running:
1. Order OEM Mazda parts to replace what you currently have.
2. See what parts need to be repaired, and buy upgraded ones.
Take the time to fully think about where you want to go with the car. Are you looking to keep the car stock, do you want to explore new power levels to achieve certain times at the track, or do you want a super fun daily driver? These are some things you should consider when deciding what direction to go with the car.
Let’s assume you took some front-end damage, which includes your top mount intercooler and intake. When searching for repairs, you’re going to notice that a stock top mount intercooler from a Mazda dealership is going to cost you somewhere around cost you big for a brand new one, according to parts specialist at Bountiful Mazda, Cody Allington. That price doesn’t include labor to have it installed.
On the other hand, our top mount intercooler is more affordable, not including the shroud or shipping. When you break that down, you’re saving money while going with an upgraded part. You’ll get an upgraded top mount intercooler with added cooling and flow benefits, AND you’ll be able to pay someone to install it, all for the cost of what an OEM top mount intercooler would cost. You’ll also get added horsepower and torque from upgrading your top mount intercooler, which will make the butt dyno very happy.
Upgraded top mount intercooler installed with shroud.
An OEM intake including the short ram and turbo inlet pipe is going to cost you a pretty penny, not including labor. That’s not a cheap part for what you’re getting.
3.5″ Mazdaspeed 3 Power Series Intake System
However, if you have decent power goals for your Mazdaspeed, you can pick up our 3.5” intake for less than that OEM intake. You’ll still be saving money and if you think about what you’re getting with it, it should be a no-brainer. You’ll get much better flow from the intake, which increases horsepower and torque.
This graph shows the difference between the OEM MAF and the 3.5” MAF. There’s a huge difference. You’ll definitely notice the increase in power and sound if you decided to upgrade to this intake.
3.5″ Mazdaspeed 3 Power Series Intake System MAF Flow Data
Most people look at getting into a wreck as the worst thing that could happen to them. However, I look at it as an opportunity to capitalize on a mistake and make your car better than it’s ever been.
Typically, the insurance company will give you the quote and write a check. If this happens, make sure to tell them you’re doing your own research on parts and picking a shop of your choice so you have the option of buying the upgraded parts.
If you played it off right, you can tell all of your Speed friends that you got your car fixed (without the mention of upgraded parts), and put a whooping on them! You could turn your car into ultimate sleeper status.
Just remember to entertain all ideas before pulling the trigger, and if you play your cards right, you can turn your wrecked baby into a modified monster!
When Life Gives You Lemons: Advice For A Wrecked Mazda December 17th, 2018CorkSport
Most people think Nascar when they hear about Daytona International Speedway. To road course guys like me, it’s the site of a 24-hour race, which we wait for every year in January. This past year, I participated in the SCCA Majors to qualify to run two different classes at the Runoffs, which were hosted at the Daytona Intl. Speedway.
My normal racetrack chariot is a 2011 Mazda 2 B-Spec, which I’ve raced for the past 4 years.
Derrick’s 2011 Mazda 2 B-Spec from Daytona coming out of turn 3.
I’ve been quietly building a 2015 Mazda 3 Sedan with a 2.5 engine to run in the SCCA T-4 class starting late in the season this year with the purpose of running it at Daytona. We picked up the car from getting the cage installed and had nine days to get all of the parts installed, get it dyno tuned for 98 octane, and load it up into a trailer to go to Daytona via Mazda Raceway Laguna Seca. There’s nothing like taking a completely unsorted car to a national championship race on the other side of the country, just for fun.
At the Pirelli World Challenge race weekend at Mazda Raceway, the CorkSport Mazda 2 was piloted by Joey Jordan and swept the three races for a perfect weekend. In between the Mazda 2 getting serviced, we worked on the Mazda 3, getting the sound deadener removed, seat mounted, and safety gear installed. We also changed the springs installed on the car to CorkSport’s 2014+ Mazda 3 springs to make the ride height lower. At Daytona, you want less aero drag because of the low profile, so having the car as low as you can get it helps the speed on the oval section.
After the last race was finished up at Pirelli, we loaded up both Mazdas and headed to Daytona, which is a 44-hour drive across the country.
We arrived at Daytona on Friday to do some final setup on the Mazda 2 and finish the prep work on the Mazda 3 before our test day on Saturday.
I’ve raced at Autoclub speedway in Fontana California before, so I was familiar with a banked track but not quite as familiar with that long of a time on the track.
In the Mazda 2, I found myself looking around at the scenery a lot during the Saturday test day. The infield was fun to find the limits on the car and mastering the bus stop with a quick hit of the brake then back on the gas was a big challenge for me.
In the Mazda 3 on Sunday, I got a reminder of what a new car can be like while getting everything dialed in. I had massive understeer with the car and had to modulate the throttle constantly to get the car to turn. On the straight sections, the car was fast and I could hang with most of the cars out there if I got enough of a run out of the corners. To give you an idea of how much faster the Mazda 3 was at the time trap, the fastest draft time I got with the Mazda 2 was 119mph. In the Mazda 3, it was 139mph. This was before you head into a turn and slow down in the shortest possible space before busting a quick left into the infield. If you get it wrong, the guys behind you made up time on you. If you get it right, you can get more of a lead.
Another huge problem I had with the Mazda 3 was I couldn’t see anything out of the left side of the car. The window size is pretty small, the window net didn’t help, and the massive left mirror did its best to keep me from seeing the apex or the other cars.
I qualified for the championship race 15th out of 22 cars, which isn’t great, but it’s not the back of the field. I was four seconds off the pace of the pole sitting Honda Civic, which gives you an idea of how well sorted that car was in comparison to the Mazda 3 in its first weekend at the track.
Honestly, the T-4 started off pretty crappy for me. I got jumped on the start and was forced to the outside of turn 1 where I couldn’t judge the car next to me going through the corner, so I lost a spot. Two laps later, I got to watch Scotty White in his Mustang get turned into by a RSX right in front of me going into the bus stop, which made for some great front row entertainment. Toss in a few dive bombs by a Camaro and it made for a good time. I spent the rest of the race trying to be as nice to my front left tire in the infield as I could.
In the end, I finished in 15th, which is the exact spot I started the race in! For this upcoming season, we’ll work on the suspension setup to improve the car’s cornering speeds to be more competitive and work on the driver setup.
I have to give a big thanks to CorkSport for the parts installed on the Mazda 3, which worked flawlessly, Joey Jordan Motorsports for the spotting and chassis setup at the track, Joe at Dynotronics for the 98 octane Skyactiv Tune in a super short period of time, Monarch Inspections for letting us steal your worker bee to drive the truck across the country, 47 Moto for the wrench help, Mazdaspeed Motorsports for being the best vehicle manufacturer that supports club racing, and my wife and kids for putting up with me running off to chase my dreams.
Daytona International Speedway and a Mazda 3 September 22nd, 2020CorkSport
But you already knew this about us. We work our 9-5 serving Mazdas and then on the weekends, we hit the track with our very own Mazda.
What exactly goes into our Derrick-driven Mazda3 race car? CorkSport.
Check out our performance in action infographic and see what goes into the CS race car. Don’t worry: if you have an older Mazda, we still have you covered.
Get improved handling and road feel while maintaining a comfortable ride. Our rear motor mount reduces your engine’s movement which enhances the power transfer from engine to tire, therefore improving throttle response, gear shifting, and driver feedback.
Gain more horsepower and torque by creating a free-flowing system without restrictions. You’ll get smooth flow, increased power, and a faster spool up.
Give your car the performance appearance and edge you have been looking for. You’ll get a quicker turning response, crisper road feel, and a firmer spring rate, all while maintaining excellent ride quality.
Remove the tendency to overpower the front tires under hard cornering. Our rear sway bar increases the spring rate on side of the suspension which is compressed most and its adjustability allows you to fine tune the handling.
Now get some drive time in and hit the track.
Cheers,
CorkSport
Mazda Performance In Action at the Track January 13th, 2016CorkSport
