Intakes for Mazdas

The CorkSport Cold Air Box pairs perfectly with the CorkSport Short Ram Intake.

When it comes to the breathability of your Mazda, an intake is the best place to start. The benefits are immediate, the installation is quite simple and it’s genuinely the best first step to getting some power and fun out of your Mazda or Mazdaspeed.

Bringing more air into the intake chamber, the intake system allows you to increase horsepower and torque for your Mazdaspeed. Each is designed to maintain optimal flow and generate ideal performance for your Mazda, with exacting tolerances and using the latest in computer-aided manufacturing techniques to bring you the highest quality and best-performing part for your money. You can expect to gain up to 30+ HP from this simple to install intake system.

The CorkSport Cold Air Box pairs perfectly with the CorkSport Short Ram Intake.

Types of Air Intake systems

Short ram air intakes suck in large amounts of heated air within the engine to help in efficient combustion. These are short and wide pipes because it uses a shorter pipe than the cold air intake, it only has access to warm air near the engine. To make up for this, it sucks in more air than cold air intakes.

Cold air intakes are a type of ram air intake system that works by drawing in cool air from outside and into the Mazda’s engine. This type of intake often has minimal bends and has a long duct with access to cool air. With cooler air coursing through the engine, combustion requires less heat and fuel.

Why Replace Your Mazdaspeed or Mazda Air Intake System

More often than not, car enthusiasts and expert mechanics recommend that you purchase an air intake as soon as possible. Even vehicles of the latest makes and models benefit from an aftermarket air intake system. Below are five of the reasons why an air intake system can improve your Mazda engine’s performance.

Get your 2014 Mazda 3 the cold air it needs with the CorkSport cold air box that goes perfectly with the CorkSport SRI.

Keep in mind, when an intake is paired with a cold air box or battery box, you create a great look for your engine bay and increase your overall Mazda performance. Also, when paired with fuel pump internals, you’ll be able to increase the efficiency, power and set yourself up for future modifications as well!

Why replace your intake system?


1. Increased Acceleration


With an upgraded intake, your Mazda can experience increased horsepower. Upgraded intakes can also increase your engine’s responsiveness when speedy acceleration is required. Because there is more air available and ready for combustion with aftermarket air intakes, your engine reaches the desired speed faster compared to the stock intake that comes with your Mazda. Those who enjoy racing, autocross, or drag strips with their Mazda or who if you just like quick acceleration as soon as the traffic light turns green, an aftermarket air intake can help you enjoy your get up and go a bit more.


2. Greater Fuel Economy


Engines rely on a mixture of fuel and air to create an explosion that powers your Mazdaspeed. When there is not enough air pumping through the engine, your Mazda consumes more gas to compensate for the lack of oxygen. Stock intakes that come with your Mazda are designed to be quiet instead of fuel efficient, and as a result, they tend to use more gasoline. Pumping in more air via an upgraded intake can reduce gas consumption and translate to savings on fuel expenses. For those who are concerned about fuel efficiency…we should note here: that the enhanced sound may cause you to have a heavier foot and decrease your fuel efficiency in exchange for spirited driving.


3. More Effective Filters


The stock air intakes that come with your Mazda normally have disposable paper filters to catch debris. While these filters do their job in trapping particles that may potentially wreak havoc on your engine, the filters eventually require replacement (often a great upsell item for your local technicians). Aftermarket intakes, on the other hand, are equipped with filters that typically have to be cleaned every 20,000 to 50,000 miles (just some soapy water and let it dry completely before reinstallation). This not only saves money but it also provides a more effective filtration method that not only keeps debris out but also lets a larger qty of air inside.


4. Enhanced Sound


Those who like the aggressive sound of a roaring Mazdaspeed engine should enjoy our upgraded intakes the most. Because more air enters through the intake to the engine, it produces a sound that our Mazda enthusiasts find thrilling.


5. Better Overall Performance


With the simple installation of an upgraded intake, you can increase the overall performance of your Mazda. Whether you decide to go for the short ram or the cold air intake, you increase your Mazda’s efficiency, speed, power, and sound.

Looking for an intake system or upgraded intake components to fit your Model? 

Shop Our Selection of Intakes By Model:

2010-2013 Mazdaspeed3

2007-2009 Mazdaspeed3

2006-2007 Mazdaspeed6

2014+ Mazda3

2010-2013 Mazda3

2004-2009 Mazda3

2014-2017 Mazda6

2009-2012 Mazda6

2003-2008 Mazda6

2016+ MX-5

2016+ CX-3

2013+ CX-5

All About That CatBack Exhaust

Mazda Catback Exhaust Installed

Ever wondered the key factors of making a decision about your aftermarket exhaust? Why Cat-back? 

Is it the diameter of the exhaust that says performance? Or is it the type of metal used? What about fitment to your current setup? None of these questions by themselves answer what you need by themselves, but all of them together help when making the decision on how to get more power out of your Mazda.

At CorkSport, we have made it our #1 priority to make our customers dreams a reality. Whether you drive a Mazdaspeed or a regular Mazda, we’ve made sure to engineer a great fitting exhaust that maximizes engine performance.

Check out the Cat-Back Exhausts by Car Model Below:

Take the Mazdaspeed 3 for example: When you purchase a CorkSport Catback Exhaust, you’re getting T304 stainless steel piping that has been polished to a mirror-like finish.

You’re also getting true 80mm piping, which is slightly bigger than three inches, making our exhaust one of the biggest bolt on catback systems.

Fitment is also a big concern to us. We make sure our exhaust systems are mandrel bent and TIG welded to make a perfect bolt-on fitment.

Mazda 6 Power Series Exhaust

Now that you know our exhaust is 80mm piping, polished to perfection, and made to be a direct fitment, you can bet this exhaust will increase performance and sound. By installing our cat-back exhaust, you’re removing the secondary unmonitored catalyst making the exhaust flow much faster out of the motor. By increasing the velocity of exhaust gases out of the motor, you increase power and make your turbo spool up a little bit faster.

Among the power gains you’ll see from installing the CorkSport Catback Exhaust, you’ll also have a car with a deep growl to it. Our exhaust has one of the best sounding tones on the market. With a quality made exhaust, comes quality sound.

When find yourself ready for a cat-back exhaust, be sure to check out CorkSport to ensure you get the highest quality for your ride.

 

2016+ CX-3 Axle Back Exhaust

Breathe Some More Life into Your CX-3

Bought a new CX-3 and wish it was a little more exciting? CorkSport can help with our lowering springs, short ram intake, and now we are proud to introduce the CorkSport Axle Back Exhaust for 2016+ Mazda CX-3 AWD.

The CorkSport axle back really gives the little bit extra that the CX-3 needs to be a fun & practical little car. By increasing the piping diameter to 60.5mm and using dual high flowing resonators, the CS CX-3 axle back provides much better sound than OE without being “buzzy” or annoying like so many exhaust option on the market. It’s louder than OE but not drastically so, plus, it avoids any drone while cruising down the highway. Check out the video below to hear how the CorkSport axleback sounds.

To go with the sound the CorkSport CX3 axle back looks great. Made from fully polished T-304 stainless steel, it will add some style to the rear of your CX-3 right away and stay looking good for years to come. The tips have been enlarged to 90mm, slant cut, and lengthened slightly to really fill out the bumper cutouts. For a final detail, a stainless CorkSport nameplate is attached to each tip and just barely peeks out from under the bumper.

As usual, you get the same OE fitment and reliability that you can always expect from us at CorkSport. As a result, this really is a no drawback product that adds a little bit more excitement to the CX-3. If you want to add some extra sound and style to your CX3 look no further than the CorkSport Axle Back Exhaust.

 

Why Lowering Springs?

Everything to know about lowering your Mazda with lowering springs.

Whether you want the better handling that comes with the lowered center of gravity, or you want to rid yourself of the wheel gap eyesore.  Lowering springs will give you want you’re looking for.

For running the track, or a spirited drive through the countryside, CorkSport lowering springs are the upgrade you’ve been looking for. By adding lowering springs and lowering the center of gravity of your Mazda allows the car to stay more planted to the road.

One of the biggest things to note on stock suspension is how far upward the suspension travels when hitting a bump. It can make the car feel like it wants to lift off of the road; depending on how fast you’re taking corners. Lowering springs help to correct the car’s suspension travel when you hit a bump in a turn.

Corksport Mazda 3 racer

Lowering springs also have about 25% increased stiffness. For the Mazdaspeed platform, increased stiffness in the rear is a must. Mazdaspeeds like to squat pretty hard when hitting full boost, so any way you can manage to stiffen up the rear is a great modification for your car.

Adding lowering springs also gives your baby amazing eye appeal and a much more aggressive look. Whether you drive a Mazdaspeed3Mazdaspeed6Mazda 3, Mazda 6, CX-5, CX-3 or MX-5, lowering springs will get rid of that ugly wheel well gap. The result is a Mazda that carries a much cleaner and more aggressive look and gives you the ability to take it to the track if you want to.

Drop your Mazda for an aggressive look and better handling with the CorkSport lowering springs.

Some people want to drop their Mazda as much as possible, and some don’t. CorkSport lowering springs don’t deliver a super aggressive drop. If you’re not interested in scraping your front bumper on every road bump, the CorkSport lowering springs have the right drop for you, and provide the increased handling capabilities you’re looking for.

 

If you’re curious about other suspension pieces for your Mazdaspeed, check out our Struts and Shocks combo kits, that give you just what you need for suspension.

Interior LED Light Set for 2016+ Mazda CX-3 and Mazda CX-9

Sometimes it’s the simplest changes to a vehicle that can really make a difference.  A crisp and well-lit interior makes for a surprising improvement. CorkSport is proud to announce that we now have LED kits for 2016+ Mazda CX-3 and 2016+ Mazda CX-9.  

The CorkSport LED Light Kit replaces all interior and some exterior lights that are normally yellow incandescent bulbs.  All CorkSport LEDs are the 7000k color for a pleasant, but bright and clear illumination.

Check out a comparison of the CorkSport LEDs vs the standard incandescent bulb.  

Sure, you can probably find some random lower-quality LEDs online, but only at CorkSport will you get a complete kit with exactly the bulbs you need along with color installation instructions, a CorkSport tin and top notch customer service.  

-BS @ CS

2016+ CX-3 LED KIT         

2016+ CX-9 LED KIT