Mazda Nostalgia – 323 GTX

Nostalgia

I recently got a good dose of nostalgia when I agreed to help my dad pick up his new (to him) car, a 323 GTX.  A longtime friend of mine had one sitting in his driveway looking pretty sad and I had mentioned it in passing to my dad that he was looking to sell it.  

Like most GTXs you find for under ~1k they need some love and this car was no exception and it needed to be towed home.

After spending an hour looking the car over once it was home I realized home much I still remembered about these cars.  Honestly, it has been 7 years since I looked at a GTX in person and the floodgates in my mind popped open with piles of information on what we needed to check out first in the car.  

As we continued to look over the car, answers to why things were not working just came right out. A good example is why does the cooling fan turn on when you crank over the engine? I didn’t even have to look, I knew there are several sensors which the car looks at to #1 turn the fan on and #2 what speed to run it at based on temperature, the A/C is turned on, etc.  Turns out the car didn’t have either of the two temp sensors plugged in or they are broken.

As we went over the car I was listing off items we need to check or replace to get this car back up and running as it should be a funny feeling came over me.  I really felt good to be working on one of these cars again. This time the money pit isn’t mine thankfully, but if I ever want to get that “good old days” feeling from my early twenties all I have to do is go over to my dad’s house and pick up a wrench as there is almost certainly something which will need to be fixed.

The fun part of this adventure is the answer to why did he buy it.  Like most 323 GTXs they are meant to be raced and this is no exception as it will be run in the Gambler 500.  Never heard of the Gambler 500 before? Well, it is like chump car or Lemons racing, you can prep a cheap car and go rally racing with it. Having a ~500 car survive the weekend of navigating GPS and not breaking down in the middle of nowhere is the challenge.

Some of you remember my old GTX which was sold to another local GTX aficionado sitting in the normal position of being broken and needing time and money thrown at it to get it back on the road again.  If you haven’t seen the car before here is a few pictures of it in it’s natural habitat which I have dug up.

If any of you decide to pick up a GTX, remember it doesn’t take much to get your 323 to do this and not leave the transmission in pieces….

-Derrick

Love for the Rotary

With all of the talk of doom and gloom for the next rotary I wanted to share the experience I had with the help of Mazda during Sevenstock 17 on Nov 22nd.  I hate to say it but while I was at Sevenstock helping out with the Diesel Mazda 6 I experienced the awesome side benefit of being next to three 4 rotor cars in the same garage.

The recent message given from Mazda about the rotary engine being important but not in the cards for a current car has been a heart breaker for the rotor heads out there, myself included as I daily drive an 87 Turbo FC.  I can definitely say that from the top down the rotary engine is important to Mazda despite it not being considered for a new car right now. Take a look at this 787 which Robert Davis (senior vice president U.S. operations aka he runs the show in US) personally drives.

Mazda-787-4-rotor

There is a genuine love for the rotary with him, I watched him wipe down the car after going out onto the track for one session. In conversations, the restoration of other rotary race cars was brought up many times and when Robert isn’t driving the 787 above he rolls in an Rx8 in NASA PT racing, when time affords it.

See the first car in the line below?  It is one of the Rx-792P IMSA GTP prototypes.

full-rotary-line-up

I watched Weldon Munsey (Manager of Dealer Affairs) hop out  after just one session with a big smile on his face.  You could tell he just loves driving that car.

This next car is one of my favorite Rotary race cars (as I had the opportunity to see it raced at Portland Intl Raceway in the early 90s).  The 4 rotor GTO kept the basic shape of the FC rx7 (which included the stock roof panel, windshield, and tail lights) and the rest of the car was pure business with a 4 rotor engine.

Rx7-GTO-4-rotor

Not a big surprise another Mazda executive drives it, Jeremy Barnes (Director of public relations).  I am sure the re-occurring theme is not lost here, these guys love rotaries and if the opportunity presents they will be pulling to get another car released for all us rotards out there.  In the meantime enjoy the video below from Sevenstock 17 with a few drive byes of the 787 and the 792p wide open on the throttle at Autoclub Speedway.

Zoom zoom.

– Derrick Ambrose from CorkSport

Derrick_HEadshot

Derrick started working with cars when he was in high school.  A friend had a GLC which they tweaked a bit which then became a 323 then into RX-7s and it was all Mazda down hill from there. His current projects are a 1968 Mustang, The 1988 323 GTX (never ending project), 1986 Honda Shadow Motorcycle and a 1968 Silverline Rambler 16′boat. For motorsports activities he has previously participated in drag racing the CorkSport Protege Drag car and Rally Cross with the 323 GTX. Currently he is driving the CorkSport Mazda 2 B-Spec race car.

If you attend any events CorkSport is at Derrick will be the guy you will talk to at most of them, so stop by and say hello!

Do you Snapchat?

SNAPCHAT

snapchat_logo

Do you Snapchat? If you do or want to join us, download the app on your favorite ios or android device.

Find the app in the app store sign up and follow us.

Our account name is: CorkSport.Com

You will need to add the whole name above, ” CorkSport.Com “.

Basically its sending a self destructing picture with or without a message to someone. When you view a picture it will have a timer counting down and then boom its gone.

So I will be sending periodic pics and or messages to the lucky ones that follow us on Snapchat. When the Carbon Fiber Hood Scoops are back in stock I might even let the Snap Chat followers know its back online ahead of the average luddite.

Download it now and add us already.

 

Thanks,
RichG

 

 

How to Keep Your Mazda Healthy

How to Keep Your Mazda Healthy…

As a car enthusiast, I always want to make sure that my car maintenance is up to date. In general Mazda’s are very reliable but, whether modified or stock, the life of your car depends on maintenance. Taking good care of your car today can help you avoid paying out more in the future on repairs. Here are the top tips I’ve collected over the years and have applied to keep my Mazda in tip-top shape. Hopefully, they’re as helpful to you as they’ve been to me.

Gasoline – Find What Works for You

To find out what octane your engine needs, first check your owner’s manual. The recommended level is often 87octane. Some models have high compression engines that are designed to utilize the octane levels of 89, 91 or higher. Ordinarily, your vehicle will not benefit from using a higher octane than is recommended in the owner’s manual. If your engine knocks or pings at the recommended octane level though, you may need higher octane gasoline.

Improve gas mileage with the Mazda 3 Short Ram Intake

Knocking may occur under certain conditions. A small percentage of vehicles may knock because of variations in engines of the same model due to manufacturing tolerances, or because of an unusual build-up of engine deposits. Other factors such as extremely hot weather, changes in altitude or hard driving conditions may also cause knocking.

Are you planning on running alternative fuel for your modified car? More often than not gas alternatives for modified vehicles require tuning. Every owner/tuner has its preference, but keep the following information in mind when choosing between E85 or race gas:

·         E85 will generate significantly more power than your typical recommended octane gas, given the same amount of fuel. The burn rate with E85 is faster than standard 87 to 95 octane, plus you get lower temperatures and more power. The downside is that you will get worse fuel economy, and your Fuel Pump will need more regular cleaning.

·         The best thing about any race fuel is its consistency. You can count on the performance of the fuel and then tune accordingly. It makes things like elevation changes, ambient temps, etc, easier to incorporate into different maps.

Oil – Change it Religiously

Change the oil in your Mazda every 3,000 – 5,000 miles depending on the type of (regular, synthetic) oil you use. If most of your miles come from highway driving (driving at a set speed for long intervals of time), you may be able to change the oil every 5,000 miles, but if you do most of you’re driving in a city or suburban area, check your oil every 2,500 miles just to be safe. If the oil appears completely black, this is a sign that you need to have your oil changed.

If you change the oil yourself, remember to change the oil filter as well. If you take the car to a mechanic to have the oil changed, he should change the filter when he changes the oil. I always recommend the OEM oil Filter and Full Synthetic oil of your preference.

Tire Maintenance – Keep ‘em Rotated

Rotate your tires every 10,000 miles to prevent uneven wear (this means the back tires should be moved to the front wheels and vice versa). Also, keep a very close eye on your tire pressure. Mazdas use tires with a very soft tread, which means your car grips the road better, but its tires are more prone to leaks and breakage.

 Look in your manual to see what the tire pressure of your front and back tires should be, and check all four tires’ pressure once a month to make sure no leaks have appeared.

Air Filter – It May be Cleaner than You Think

Mechanics will often try to convince you to change your air filter every time you change your oil. However, you shouldn’t have to change your air filter more than once every 20,000 miles unless it’s excessively dirty.

To learn about high-performance air filter’s go to:

·         The Best Power Mod for a Mazda –  //corksport.com/blog/the-best-power-mod-for-a-mazda/

·         High Flow Panel Filter –  //corksport.com/blog/product-release-corksport-high-flow-panel-filter/

Transmission Fluid – Keep an Eye Out

To protect your transmission and keep your car running for as long as possible, have the transmission fluid checked every 40,000 miles. In general, you don’t need to replace it until you hit 100,000 miles, but if you don’t check it and the fluid does burn out, it can ruin your transmission, a job that can cost more than a couple thousand to repair on a Mazda.

To learn about a related transmission topic go to Transmission Inserts at:  //corksport.com/blog/the-best-power-mod-for-a-mazda/

Battery – Inspect it When the Time is Right

As long as you are careful not to leave the light or any other battery-operated extras such as the stereo turned on when your engine is not running, your Mazda’s battery should last approximately three to four years. When approaching the five- to six-year mark, be sure to have it inspected. It is better to be prepared than to have your battery die unexpectedly when you need to be somewhere.

To learn about the ECU Relocation Battery Box, go to:  //corksport.com/blog/increase-room-in-your-engine-bay-with-a-new-battery-box/

What If?

As a longtime Mazda enthusiast, I’ve seen the company evolve in many innovative ways. Most recently, Mazda has focused its attention on improving the current Skyactive Technology lineup, including the SKY-G 2.0-liter gas and SKY-D 2.2-liter diesel engines.

This technology is great for those looking for good fuel economy and better engine output. But what about the enthusiast who, instead of seeking MPG, is drawn to a fun, high-performance vehicle they can enjoy driving 24/7?

Here’s what I’m thinking.

Sure, the 2.3 MZR engine had its ups and downs and can be improved by the enthusiasts who own them. But, I imagine something beyond what we have now. Consider this. What if the next lineup of Mazdaspeed 3’s had a 2.5L MZR engine with an upgraded turbo and a High-Performance Fuel Pump (HPFP) to help with the volume and pressure to produce an ideal 320 HP beast that will scare your competition away?

But let’s not stop there. Let’s address the torque steer under acceleration with an all-wheel-drive (AWD) system. An AWD Mazdaspeed3 was shelved years ago; the automaker said the high price point wouldn’t be saleable and the hatchback style wouldn’t be attractive to consumers. But now, hatchbacks are growing in popularity and perfectly positioned to rival any competitor. This creates a great opportunity for Mazda to introduce this next generation vehicle. With that in mind, I ask that today we raise our fists in solidarity for this type of Mazdaspeed innovation.

Mazda. “It Just Feels Right”

Jose Rivera – Mazda Community Blog

Check out the latest Mazdaspeed 3 performance parts

Representing CorkSport Mazda Performance

Representing CorkSport Mazda Performance.

Since starting here at CorkSport HQ, I find myself searching the lanes of traffic for Mazdas. I can’t deny that it gets my heart pumping a little bit when I see a Speed3, but that’s merely because I have a preference for them and the “zoom-zoom” effect.

What keeps me looking is that I don’t always see Mazdas of what I’ll call the “proper persuasion”. It may just be a Pacific Northwest thing, but there are a lot of sexy performance cars roaming the streets disguised as family vehicles. Now don’t get me wrong, a family car is always necessary, but after seeing what the enthusiasts are capable of, I get a little disappointed when I don’t see a CorkSport branded vehicle behind every Mazda emblem.

Over Labor Day weekend I was driving home from camping and having a conversation with a fellow car enthusiast (he’s into Mitsubishis, yuck) about how often we see cars “repping” their favorite performance brand. He was actually doing a great job of making me defensive, saying that he’d never seen a good looking performance Mazda. He said it was a rare occurrence out here to see a clean/stance one and then for it to also be repping CorkSport, “like seeking unicorn’s”. I was disagreeing with all that I had, and yes I mean that in reference to volume control.

We were in a deep, what I’ll refer to as an, “elevated and passionate” conversation, when low and behold, there in the lane just left of us, was a tiny 6” decal on the back right of a very clean Speed3 (Gen2). A perfectly pitched screech of “TOLD YOU SO” bellowed from my mouth, followed by a quick cell phone pic and a good long laugh at how “I (Kim) am always right, get used to it.”

Bloogggoooo2Bloogggoooo

Since then, we have found and rewarded the owner of this beautiful beast https://www.facebook.com/photo.php?fbid=10151905810739257&set=a.317272679256.181853.126409094256&type=1&theater, but it got a great conversation going in the office of “where is the best spot to place a decal?”

So, this is the question I pose to you, our readers:   “Where do you think is the perfect spot to rep your favorite performance brand?” I prefer them to go along with the elegant lines of the car, but others say that having them stand against those brings a slick look as well. What do you think?

Here are some of the pictures that we have seen the in past, please feel free to post yours so we can check it out!

   CorkSport-Blog-Decal-Sticker-Reward-Repping-Mazdaspeed-Mazda-3CorkSport-Blog-Decal-Sticker-Reward-Repping-Mazdaspeed-Mazda-3-6-CX5-2

CorkSport-Blog-Decal-Sticker-Reward-Repping-Mazdaspeed-Mazda-3-6-CX5-20

Can’t wait to see what you all show us!

Sincerely yours,

The very passionate and boisterous CorkSport Customer Service Representative,

Kim