At CorkSport we value innovation. We’ve got dozens of products that are unique on the market. Our Blow-off valve is being patented. How do you innovate a shift knob? That’s a tough one but we found a way!
Are you ready for one of the first shiftknobs that you can adjust? At its lightest, weighing in at 175 grams, and adjustable up to 320 grams, you will be able to tailor your shift weight to your driving style.
To really feel your shifts, adjust the weight to the lighter side, as low as 175 grams and feel the intricate shift points as you flow through the gears. For those that like heavy knobs, you can max it out to 320 grams, giving you smoother shifts that easily falling into gear as you shift up and down through the gears.
For example the first generation Mazdaspeed 3 (2007-2009) OEM shiftknob weighs in at 260 grams and the 2nd generation Mazdaspeed 3 (2010-2013) weighs in at 280 grams. You can find that sweet spot above or below that OEM weight to customize your driving style.
After you find that ideal and magical weight, installation will take about a minute as you screw on the knob. There are no set screws or adapters, it will screw straight on the OEM shaft as they were designed specifically for your Mazda vehicle. CAD designed and manufactured out of a durable deep blue or sleek black aluminium for a long life and incredible feel.
As you are upgrading your Mazdaspeed 3 you start to notice the sharper pulls and unpredictable weight shifting of the engine.
The CorkSport Mazdaspeed 3 Transmission mount will help decrease this movement and give you smoother shifts on the streets or on track use.
Built with black zinc oxide plated steel for a strong frame and a reinforced gusset to extend the life of the bushing.
The CorkSport Mazdaspeed 3 Transmission Mount is CAD-designed and machined with precision. Perfect fitment and extremely rigid to handle the stress from the torque from your engine.
The Rear Motor Mount and the Passenger Side Motor Mount are also great additions to firming up the power plant on your Mazdaspeed 3. With less wheel hop and a less torque steer this trio of mounts will greatly reduce engine movement allowing you to enjoy the Zoom Zoom of your Mazdaspeed 3.
Oh, the wonders of the East Coast. Potholes, 80mph in a 55 zone, Toll Roads and EZ Pass, humidity and some of the greatest people you will ever meet!
Kim, Brydon and I had the wonderful, nay, EPIC, opportunity this year to attend the EPIC NATOR MEAT put on by a few members from mazdaspeedforums.org . Sadly we had only a day and a half to hang out with hundreds of people, watch some drag racing, and join everyone for a Dyno Day. This is one of the greatest events you can attend and has arguably the most knowledgeable people currently driving Mazdas all in one place. Not only did we get to see 500+ horsepower speeds at the event, but we got to witness some of the cleanest looking, most original, most unique and even the world’s fastest Mazdaspeed 3, all in one place.
Here are some of my Highlights.
Hanging out till 3 am in the parking lot and back patio of the hotel and learning more than I ever thought possible about Mazdaspeed’s, among other things…
Rolling from Philadelphia to the Dyno Day and running into a crew of 6 or so Mazdaspeed’s who had no idea who we were in our weak little Honda rental.
Eating some Killer food at Buca di Beppo and hearing so much passion and love of cars during the conversation.
Finally getting to meet so many people that I’ve had such wonderful conversations with on the phone, through email, through PM, or in threads.
Getting out of the Northwest rain and finally getting some Sunshine!
Some of the Worst Parts
Arriving at 8 am to the Dyno Day after a red-eye flight leaving at 6 pm the night before with a layover in Phoenix. Ugh.
Not having my own 2009 Mazdaspeed 3 that got left back in Washington.
Having to leave around 1:30 on Sunday.
Not bringing shorts, the weather was beautiful.
Accidentally buying bottled water that was far too expensive at one of those incredibly terrible and yet wonderful, quick stops in the middle of the highway. The place was a zoo and WAY to expensive.
Walking into the wrong room at midnight.
Time for Drag Racing
Kim at the Drag Day doing some Social Media Updates
The World’s Fastest MS3 and Crew Getting Prepared for the Drag Day
Mazda’s only for Dinner at Buca di Beppo
Some of the Lovely People at the Dyno Day
Halfway through the Dyno Day, Check out those Numbers!
Flame Shooter
The Unexpected Mazdaspeed Crew we caught Rolling to ENM
Thanks for everything.
-Spencer@CorkSport
Mazdaspeed EPIC NATOR MEAT 2014 – Spencer’s Review and Wrap Up December 17th, 2018CorkSport
The Cobb Tuning Accessport is a device that communicates with your ECU (Engine Control Unit). When you own an accessport you will be able to read error codes, modify engine settings, and take informational logs of data to keep your Mazda running reliably, and to give it more power.
The main reason people purchase the accessport is to install maps on their car.
What is a map?
A map is a preconfigured group of settings or parameters for your car. Want your Mazdaspeed to get better gas mileage? Run the “Economy Mode Map.” Want your Mazdaspeed to run faster? Remove the boost limits in 1st and 2nd gear, then run a “Stage 1 Map.”
Maps also allow you to tell your ECU specifically what power modifications you have done and how you want them running. If you have a new downpipe that flows better and Max Flow Fuel Pump Internals, then your ECU will need a new map installed that tells it how to control the boost levels by controlling the waste gate, the spark advance, ideal fuel pressure, fuel trims, and many other things.
So where do I get these maps?
The Cobb Accessport will come pre-installed with a few maps that are known as OTS (Off-The-Shelf) Maps. They are basic maps that should cover a wide variety of parts. Though they are more beneficial than keeping a stock ECU tune, they are nowhere near as beneficial as doing a custom tune. Custom tunes can be done by anyone with Accesstuner Pro who is willing to devote time to learning the ins and outs of engine control management. Most people who don’t want to spend hours tweaking small variables to meet safe and powerful conditions choose to get a tune done by a professional.
For the Mazdaspeed platform there are many tuners to choose from:
Or you could find a local tuner who will do a Dyno Tune
How do I use this thing?
The accessport is really rather simple. If you can use a modern smartphone, you can figure out the accessport.
Step 1: Find the OBD II port on your Mazdaspeed 3 (located on the left side of the dash above the hood lever, below the traction control switches.) and then plug the accessport cable in.
Step 2: Tell it to install. Make sure you follow all directions on the screen and don’t shut your car off halfway through install.
Once installed to your car the accessport will not be able to be installed in any other vehicle unless you uninstall it. This is called by many “marrying “ the accessport. You can only install an “unmarried” accessport to your car. If it’s already “married” it will not work, which is why buying one used can be so sketchy.
Now that it’s installed, you can change maps, do datalogs, and view check engine lights right from inside your car. When it isn’t installed, you can easily connect it to your computer and load the accessport manager to copy new maps to the device, or open datalogs in Excel. You can eve use tools such as Virtual Dyno to monitor performance gains.
The Final Step
Once you have installed the accessport and decided on the map to use there is only one thing left to do: Drive. Get out there and enjoy your car with its new power curve, removed boost limits, and better breathing. If you thought your car was fun before, just wait until you get an OTS map installed with your accessport and put the pedal down for the first time!
Once you’ve done that and realize how amazing it is, I dare you to get a custom tune for your specific car, modifications, gas, elevation, and driving habits. You will be BLOWN away.
Overall, the accessport is an amazing device that every Mazdaspeed owner should have for safety, reliability, power, and to learn more about your car. Let us know if you have any questions about them, or purchase one here.
CorkSport is pleased to announce the CorkSport Adjustable Shortshifter for the Mazdaspeed 3.
CorkSports Adjustable Shortshifter was designed to adjust your shift throw by up to 35% shorter than the plastic OEM shaft to allow for faster and more efficient shifting.
With two ways of adjustability, you can tailor the shift position by adjusting the height of the shift knob within a range of 4 inches and adjusting the distance of your shift throw. As a direct OEM replacement and maintaining OEM fitment, after installation you can opt to use the OEM Mazda shift knob or go for an aftermarket shift knob.
This is a great mod if you have a 6 speed manual transmission, you can install it yourself and you will clearly enjoy the new feel of the adjusted throw of your shift.
If you have a standard Mazda 3 or SkyActiv model call our sales team to be on our beta test team.
The CorkSport Mazdaspeed 3 Adjustable Shortshifter is available now!Order yours today!
