The Best Power Mod For A Mazda

In the ongoing quest to make your Mazda more powerful, and fun to drive, we have developed many great aftermarket options.

The stock airbox and air intake on most Mazdas were designed for economy instead of power. The problem with using the stock filter and airbox is that it functions similar to breathing through a rag. The rag does a great job of keeping contaminants and dirt out, but it also requires extra effort to pull air in.

When you upgrade the intake to a CorkSport Short Ram Intake you remove the air stifling setup and finally breath freely. Suddenly, your car goes from an underpowered, oxygen lacking zombie, to the free breathing, throaty roar of increased horsepower and freedom.

Take a look at a section from our book โ€œThe Ultimate Mazda Performance Guideโ€ about how a Short Ram intake system should be your first modification for power.

If you are looking to start the year off right, and are ready to upgrade your intake system we can answer any questions on which option is best for your ride.

Want to start 2014 off with some extra power? How about just letting your Mazda breathe easy? Thankfully you can do both with one simple modification, the Short Ram Intake.

www.corksport.com

Clearance Bonanza!

Around this time of the year everyone is looking for a good deal on some parts to make their money stretch just a little further. If you are a Mazda enthusiast you may naturally take a look at CorkSport to see what we have to offer in the way of deals this holiday season.

This year CorkSport has a large range of parts on clearance for Mazda enthusiasts across the spectrum, from 90-94 Protege parts all the way up to the 2010+ Mazdaspeed 3.

Need some examples?

For the Mazdaspeed 3/6 we have an Aluminum Fidanza flywheel.

Want something for the exterior of your Mazda? How about an AutoExe Rear Bumper which fits 2004-2009 Mazda 3 hatchback and Mazdaspeed 3s.

Yes, we have suspension parts available too with everything from an AutoExe front sway bar for the Mazda 3 to adjustable swaybar end links for the Mazdaspeed 6.

Many of the items we have on clearance are parts which will no longer be available once we sell out so this could be your last chance to get them. This is especially true for parts that we have listed for the older car models like the 90-94 Protรฉgรฉ.

Now here comes the really fun part. Beginning today until the end of the month, we are giving you a chance to make an offer on any of the clearance items we have listed! If a price is just out of reach, but you REALLY want that product, you can email me De*****@co*******.com with the part you are interested in and your best offer. There are rules to this so please read the rest of this post before you go crazy and start sending over your offers.

RULES:

  • We are not accepting offers on regularly priced items. This only applies to clearance items.
  • Email is the only way we will accept an offer on a clearance part.
  • Do not call up to make an offer, I will not be able to help you on the phone about it.
  • Do not post up on this blog with an offer.
  • Do not post up on Facebook or in a forum either. I will not be looking there and we will not answer you.
  • Do not send us a contact us email through our webpage with an offer on a clearance part, we will delete it.
  • If a part is no longer in the clearance section then it is sold out or no longer available at the clearance price.
  • This is a first come, first serve deal, so please no whining or complaining if the part is no longer available or

on clearance.

Happy Shopping!

Derrick-

P.S. We will be adding more parts to the clearance section as the week goes on (no, not top mount intercoolers, intakes, or exhaust systems…or any other CorkSport parts that have been released in the last two years) so feel free to check back throughout the next week to see if a part you want comes up.

Product Release! CorkSport Mazdaspeed Shifter Bushing Kit and Short Shift Plate

CorkSport is pleased to announce a new product line designed at enhancing shifting and providing positive gear changes on Mazdaspeed vehicles. Our new line-up includes the CorkSport Mazdaspeed 3 Shifter Bushing Kit and the CorkSport Mazdaspeed 3 and Mazdaspeed 6 Short Shift Plate.

An easy upgrade that will eliminate side to side compliance and remove the slack on your shifter, the CorkSport Mazdaspeed 3 Shifter Bushing Kit replaces the rubber OEM shifter bushings with aluminum black anodized shifter bushings. By replacing the factory rubber bushings, which have a tendency to deteriorate and fall apart, with CorkSport shifter bushings, customers will see a noticeable difference in the way the car drives and improved shift responsiveness that will last for years to come.

The new CorkSport Mazdaspeed 3 Shifter Bushings are CAD designed and machined for exacting fitment and are made from billet aluminum for a long lasting durable finish. The shifter bushing kit comes with a two year warranty and easy to follow installation instructions for a quick simple upgrade that will dramatically improve youโ€™re vehicles shifting responsiveness.

CorkSportโ€™s Mazdaspeed Adjustable Short Shift Plate will further improve the shifter performance by adding precision and reducing the throw of your shifting while keeping the height of your OEM shifter unchanged.

The CorkSport Mazdaspeed Short Shift Plate is made from ยผโ€ CNC Machined Steel Plate with a powder coated black finish. The adjustable setting allows drivers to customize the throw to their liking by a 20% to 40% reduction. The kit comes with a counterweight included for added responsiveness and self locking bolts for an easy installation that will take a mere 15-20 minutes to complete.

Both parts are priced competitively at $39 for the CorkSport Shifter Bushing Kit and $69 for the CorkSport Mazdaspeed Short Shift Plate and are available for purchase at www.CorkSport.com

Featured Car of the Month – Mackey’s Mazda 3

The CorkSport Sponsored 2010 Mazda 3, driven by Josh Mackey, photographer and marketing specialist by day and Editor and Chief of NWMotiv.com by night, has gotten a lot of attention lately (including a feature in the December issue of Import Tuner Magazine), and for good reason. Mackey started his 2010 Mazda 3i Sedan project in June of last year with the goal of taking the mid-range sport compact car to the next level using a variety of styles and showcasing realistic modifications that anyone could do while maintaining a practical everyday car.

Mazda 3 driving fast

Josh was attracted to the Mazda 3 because of the loyal community and followers, the price point and the suspension that, even from the factory, was sportier and more fun than anything else he had test driven. Even so, he immediately set to work improving the suspension of the 3 by adding a CorkSport Front Strut Bar, CorkSport Lower Rear Sway Bar, and Stance USA GR+ Coilovers. He also replaced the tires and wheels with Konig Lace 18×8โ€ +35 wheels and Hankook V12 215/40/18 Tires.

strut bar and sway bar by CorkSport

Mackey went with the 2.0 liter base model Mazda 3 so that he could design the car from the ground up by starting with the most common package that the everyday tuner might select, so when it came time to upgrade the engine and exhaust, Josh knew to get the vehicle to the next level he would need the trifecta of I/H/E (Intake, Header, and Exhaust).

He added the CorkSport Power Series Short Ram Intake and opted for the addition of the CorkSport Performance Power Series Cat Back Exhaust that features dual resonators, a single tailpipe design and a 60mm racepipe. He finished off the engine modifications with a MSDS 4:1 Ceramic Header.

corksport mazda exhaust pipe and cat back exhaust

Once the Mazda 3โ€™s suspension and basic engine modifications were complete, adding the proper equipment to stop it was a no brainer so Josh went to work on some brake modifications with the CorkSport Stainless Brake Lines, EBC 3GD Zinc Coated Slotted Rotors, EBC Red Stuff Brake Pads and Motul Brake Fluid.

Mazda brake lines and suspension products

A fan of clean lines, Josh has also done some tasteful exterior modifications that include a 3M 1080 Carbon Wrapped Roof, V-LED Platinum LED bulbs and V-HID lighting, a CorkSport Front Plate Relocation Kit, Mazda Accessory Side Skirts and a 35% Matching front and rear tint.

Continuing with the same exterior design, Mackey wanted to make a point by taking his interior to a whole new level with a full leather installation provided by Katzkin Leather. Two-tone leather interior combining dark midnight grey leather that is stitched together with dark slate perforated suede is installed in both the front and rear seats and the door cards. Stage 2.0 of the build will focus on finishing the rest of the interior by wrapping the headliner and pillars in the same material. The rest of the interior is accented with 3M carbon wrap installed by Graphix by Tex and soon-to-be-installed SRP Racing two-tone aluminum racing pedals.

2nd Gen Mazda 3 Interior

This particular Mazda 3 did not come with the aftermarket BOSE system that most Mazdaโ€™s get from the factory. Mackey knew that if he wanted to take this project to the next level and maintain a competitive level with other Mazdaโ€™s in the industry, a completely new audio system would be needed. Diamond Audio provided a complete setup of front and rear component speakers, amps, and low-profile subwoofer. The entire system was expertly installed by James Anderson, all controlled by an Alpine In-Dash DVD/GPS Head unit.

Mazda 3 audio setup

Whatโ€™s next for the NWmotiv Project 3? โ€œLots of tiny little things that need to be finished up, new bumper lenses, new wheels, front lip, maybe a dptune ecu upgradeโ€ said Mackey โ€œThe NWMotiv Project3 takes everything that Iโ€™ve learned from the years. Clean lines, clean mods, nothing overdone, and everything tasteful.โ€

Mazda3 with mountain in background

If you want to follow Josh Mackey’s progress on his project3, you can check out his regular posts at https://www.nwmotiv.com

Connect with us

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

One Day Sale and So Much More!

The holiday shopping season is officially underway and to show our appreciation to our customers for their support and dedication throughout the year, we have rolled out NOT ONE but TWO promotions during the month of November!

We already reward our customers for shopping with CorkSport by providing 5% back in the form of rewards points to be used on any future purchase on CorkSport.com, but for the month of November, we have sweetened the pot! Purchase anything from CorkSport.com from November 5- November 30, 2011 and DOUBLE YOUR REWARDS POINTS. Thatโ€™s right, all month long โ€“ 10% back when you purchase from CorkSport.com.

Now hereโ€™s where we really blow your mind! TODAY ONLY we have an 11/11/11 sale that gets you 11% off any CorkSport brand product you purchase on corksport.com! To receive your 11% discount, simply use coupon code ELEVEN11 during your checkout to get the discount applied to your order.

11% + DOUBLE REWARDS POINTSโ€ฆthatโ€™s essentially 21% off CorkSport brand products all day long!

Some of you may be asking yourself, should I wait until CorkSport does a black Friday sale? Donโ€™t wait CorkSport fans, our 11/11/11 sale will be the only one day sale of the month so take advantage today to get the best deal of the year!

Many of you may already have a laundry list of CorkSport products that you have been waiting to purchase, but some of you might be asking yourself right about now, โ€œwhatโ€™s new at CorkSport?โ€ and I am here to tell you that we have something for everyone!

Today, we are officially rolling out our new black oxide hose clamps for the CorkSport Power Series Short Ram Intake. Now you can black out your intake and give your engine a stealth look with CorkSportโ€™s black oxide T-bolt clamps for no additional charge. You asked, we answered, what more can we say.

Drive a Mazda 2 and thinking about suspension tuning? Great, because we just released the CorkSport Mazda 2 Front Sway Bar! It has been designed and tuned to compliment the CorkSport Mazda 2 Rear Torsion Bar and if you purchase the two as a kit you get an additional 10% off. That means you get 21% off your purchase and 10% back to spend later.

Any Mazdaspeed 6 drivers reading this post? We just released the all new CorkSport Mazdaspeed 6 Rear Sway Bar.

Mazdaspeed 3 drivers, if youโ€™ve been waiting to upgrade to a FMIC, today just might be the day.

Again, we want to thank our loyal customers and the Mazda community for supporting CorkSport.

Happy Shopping!

-Gwynne