It’s time to liven up your 4th GEN Mazda 3 Sedan with the new CorkSport Performance Lip Spoiler for 2019+ Mazda 3 Sedan and 2021+ Mazda3 Turbo Sedan. While Mazda did a good job creating classy styling for the newest 3, we find it to be a little boring, especially when on lowering springs and a nice set of wheels. The CS spoiler offers a much more aggressive trunk lip than the small OEM Mazda unit, without detracting from the great OEM styling. Its features incorporate the original Mazda body lines to stand out without being obnoxious. Keep on reading for full info and pictures!
A Stylish Spoiler For The Mazda 3
Like its hatchback counterpart, the CorkSport sedan spoiler offers an “OEM+” look. We took the body lines and design cues of the Mazda 3 and adapted them into a more aggressive spoiler than is offered by Mazda. It extends and raises the rear edge of the trunk to finish off the vehicle’s rear better. The CS spoiler also carries over the tops of the rear quarter panels and ties into the main body line. The rear face of the spoiler follows the taillights before moving upward at the same angle as the end of the lights for extra detail. Finally, the spoiler’s top and rear faces are concave for a bit of a “duckbill” type of look. These features combine to ensure the CS spoiler looks at home on a 4th GEN sedan and will make you wonder why Mazda did not have something similar from the factory.
The Best Spoiler Fitment for The Mazda 3
Fitment was as important as styling, so the design began with a 3D scan of the trunk and rear quarter panel area. This scan was used as the base for the entire design that was completed in CAD software. After many test fits and iterations for best fitment, we were left with a final design that matches the OEM curves very well and can be installed with no drilling or trimming.
Carbon Fiber & Fiberglass Options
After the fantastic response we received on our material choices for the 4th GEN Mazda hatchback spoiler, we knew we had to do the same thing for the 4th GEN 3 sedan. Each CS trunk lip is made from a fiberglass foundation before being topped with your choice of 3 materials. Full fiberglass, woven carbon fiber, and forged carbon fiber are all available. The two carbon options are finished off in a UV-resistant glossy clear coat with a mirror-like finish. The regular fiberglass will come in a satin black finish that is ready for light sanding and a finish coat of paint or wrap. Each material has the same shape, but you can personalize the look to match your build and budget.
Easy to Install
Installation of the CorkSport Mazda3 trunk spoiler could not be any easier. It is attached with included 3M VHB tape for a simple and secure fit with NO DRILLING. If you have the OEM Mazda lip spoiler, installation is a little more difficult as you have to remove it to install the CS, but we include covers for the holes that are no longer used with the CorkSport spoiler. Full-color installation instructions are also available so you can transform the rear of your sedan in as little as 30 minutes!
If you want to add the CorkSport 2019+ Mazda 3 Sedan Spoiler to your ride, head to the product page for even more pictures and angles. Feel free to reach out with any questions; we are glad to help!
Connect with us
You may also like
- Best Mazda 3 Cat Back Exhaust System for the 4th Gen
- 5 Reasons You Need The Cold Air Box Intake System for the 2019+ Mazda 3 Non-Turbo
- Boost Appearance & Handling with the 2019+ Mazda 3 Coilover Kit
