Mazda 6 Turbo and CX-9 Short Ram Intake

That’s right, it’s time to start making more power on the SkyActiv 2.5T. We are proud to introduce the CorkSport Power Series Short Ram Intake for 2018+ Mazda 6 equipped with the 2.5 Turbo Engine and 2016+ Mazda CX-9. We replaced the restrictive factory airbox with a free-flowing intake system that was designed to help your turbo breathe significantly better. The SRI offers better performance, sound, and looks in an easy-to-install package. Read on for full details, and be sure not to miss the sound clips in the video below!

This CorkSport Short Ram Intake was designed specifically to get the best the 2018+ Mazda 6 2.5T and 2016+ Mazda CX9 have to offer. From the precision machined MAF housing to the high-flowing filter, each component in the CS intake system offers an improvement over the stock counterpart while retaining great fit and finish. All mounting hardware, brackets, and clamps are included to make your installation quick and painless.

Starting at the OEM turbo inlet pipe, the factory airbox utilizes a ribbed and flexible rubber elbow. While working well enough, the ribs induce significant turbulence into the intake tract. The CorkSport short ram intake replaces this elbow with a smooth-flowing silicone elbow. In addition, the silicone is 4-ply reinforced with nylon to eliminate any chance for volume reduction under wide open throttle.

Next comes the MAF sensor housing. The MAF sensor essentially reads the volume of air that is entering the engine so the ECU can adjust tuning to suit. Since the OEM unit does a good job here, it was imperative that the CS MAF housing matches to ensure no check engine lights or tuning issues. The CorkSport MAF housing is precision machined from 6061-T6 billet aluminum to match the OEM housing to ensure no CELs, no tuning issues, and great flow.

Finally, the CS SRI uses a performance AEM dry-flow filter. A high-quality filter like this is long-lasting, reliable, and can be washed and reused. It has superior filtration to the OEM filter, while also allowing more airflow into the intake tract.

Filter for the CorkSport Short Ram Intake

Now for what you’re all interested in: power gains. By removing the restrictive OEM airbox and turbulent intake elbow, we were able to pick up 5-16whp and 7-23wtq through the rpm range. This power bump comes with no tuning changes and with identical testing conditions. Check out the dyno graph below to see for yourself! Note: the variance in low RPM (2800 and lower) is due to difficulties associated with dyno testing an automatic vehicle.

Freeing up a few extra ponies is great but what you will really notice is the added engine and turbocharger noise. That restrictive airbox does a little bit too good of a job at dampening out all the fun sounds that come with a turbo. We were honestly a little surprised by the flutters, whooshes, and psshh noises that come with the CorkSport SRI. You also gain a little extra engine induction noise under hard acceleration. The extra noise is enough to be fun when you want it but not annoying or distracting when you don’t. Watch the video below to see what it sounds like.

Watch the Product video for the Short Ram Intake

Stay Up-to-date with CorkSport

As with most CorkSport products, this SRI kit comes with all the clamps, hardware, and even a support bracket for the MAF housing to ensure you have an easy and quick install.

The CorkSport SRI for 2018+ MZ6 2.5T & 2016+ CX-9 is a great modification whether it’s your first or just the latest on a long list of builds. It provides a noticeable power gain, adds some extra fun to your ride, and will support future mods down the road. Pick up yours today!

Be sure to contact us with any questions you may have, we will be happy to help!

Connect with us

May you also like:

August 16, 2018September 22, 2023

CorkSport Cat Back Exhaust for CX-9

Time to bring some CS love to those who need some more space than what a hot hatch can offer. Introducing the CorkSport Power Series Cat-Back Exhaust for 2016+ Mazda CX-9 AWD.

Mazda CX-9 Installed CorkSport Cat Back Exhaust

The CX-9 has great potential with its turbocharged 2.5L engine but it is bottlenecked by the small stock exhaust. The CorkSport catback ups the exhaust diameter to 80mm (from the OE 60mm) and utilizes high flow pass-through resonators to really help that turbo breathe better.

To go with the better performance, the CorkSport cat-back also looks great. Made from CNC bent, fully polished, T-304 stainless steel, it’s definitely an attention grabber that will stay looking great for years to come. The dual exhaust tips were upgraded to 100mm outer diameter and extended to really fill out the bumper cutouts. Don’t worry though; the tips are noticeable without being obnoxious and detracting from the clean look of Mazda’s Kodo design philosophy.

Last but certainly not least: the sound. The upgraded piping diameter and less restrictive resonators combine to create a sound that is certainly louder and more pleasant than stock without being unbearable for the daily commute. You hear the exhaust when you want to but it quiets down while cruising and does not drone. As a final bonus, you get a little taste of turbo noise as it spools up. Check out the video down below to hear a comparison between the CS CX9 cat-back and the OE exhaust for yourself.

All of these benefits come with the same CorkSport quality and customer service that you all have grown accustomed to. This means OE style fitment that retains all existing exhaust hangers and oxygen sensors since no one likes a check engine light.

Mazda CX-9 Cat-Back Exhaust CorkSport exhaust tip

Whether you have moved on from a Mazdaspeed but miss the sound or just want to spice up your grocery getter with a little extra noise, the CorkSport Mazda CX-9 cat back is an upgrade that hits all the right notes. Check out the product listing for full details.

Want more for your CX-9? There may be a few more things coming down the pipeline, but submitting a product idea helps us to know what you’re looking for!

You may also like: