The CorkSport Mazda6 Power Series Short Ram Intake replaces your restrictive factory airbox with a free-flowing intake system to get more power and sound out of your 2.5L SkyActiv Turbo.
Increase efficiency, power, and style under your hood with the CorkSport Short Ram Intake. Each component in the CS intake system was designed for function and fitment to get the best out of your Mazda 6 Turbo.
Dynamometer testing showed gains of 8-12WHP and some of the best sound we’ve heard from a short ram intake that installs in as little as 30minutes!
The CorkSport Advantage
Fit, Function, and Performance
The CorkSport Short Ram Intake was specifically designed for the 2018+ Mazda 6 2.5T. The combination of a precision machined MAF housing, laminar flow silicone elbow, high flow dry-element air filter and formed anodized mounting bracket.
Performance and Sound
The factory airbox in the Mazda 6 not only restricts airflow, but also the many turbo induction noises. As an added bonus, the audible turbo and bypass valve sounds are greatly improved and increased with the CorkSport Short Ram Intake. This will put a smile on your face whether you’re commuting to work or attacking a backroad. We highly suggest you watch the product video above if you haven’t yet.
The increased efficiency of the Short Ram Intake System provides an 8-12whp increase from 3500rpm to redline. No tuning required for results and no check engine lights.
CorkSport MAF housings are CNC machined from 6061-T6 billet aluminum for precise dimensional tolerance. The MAF sensor monitors all airflow entering the engine, therefore MAF alignment and consistency of the MAF housing inner diameter is critical for proper air fuel ratios and ECU engine management.
Turbulence and flow resistance is the #1 leading killer of performance from your Mazda. The CorkSport SRI replaces the turbulent ribbed rubber coupler with a 4-ply reinforced silicone coupler. This reduces turbulence within the airflow entering your Mazda’s engine, thus increasing efficiency and power.
Dry Flow Filter
Filtration is key to a long lasting and reliable performance intake; that’s why every CorkSport Intake System utilizes an AEM Dry-Flow Air Filter for its superior filtration and airflow. The dry-flow filter is washable and reusable.
Vehicle Fitment: 2018+ Mazda 6 2.5T & 2016+ CX-9
Designed in America: Designed and tested in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support: 2-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675
No Tuning required and no Check Engine Lights.
There will be added engine, turbocharger, and bypass valve noise as a result of installing this intake. “Whoosh” or “psshh” sounds are normal and do not need to be worried about.
How To Install Your CorkSport Mazda6 Power Series Intake
It will take you two hours to install the CorkSport Power Series Intake with our easy-to-use instructions.
1 Hour Install Time
Toshihiko Okaze04/19/2019, 12:15 AM
Great product, it's nice to hear the turbo sounds in a family car.
Jesse Corral03/27/2019, 07:39 AM
Dose it fit CX-5 ?
Sam02/18/2019, 10:16 AM
This Short Ram Intake is well made and I could definitely feel the difference in the throttle response. The car feels like it has a little more pep in its step. Also, you can hear pphhhsss of the turbos bypass valve. It is a quick and easy upgrade well worth doing not only for the performance gains, but the audio and visual experience as well.
Sean02/02/2019, 10:10 AM
I have been buying CorkSport products for about 5 years now, and as soon as this was released I purchased the intake knowing it would be high quality and provide the improvements I was looking for. This is a great upgrade to the 2.5T engine. I was thrilled with the performance of the stock engine, but since it is a family sedan, the engine noise was too quiet for my taste. The intake was a great addition to the car, I can now hear the turbo spool and the bypass valve when shifting/letting off the throttle. The noise level is low enough that my wife did not notice a change with the windows up, though hard driving you can hear some volume increase (mainly the BPV). With the windows down the intake sounds terrific!
While I have not dyno'ed the car, I do feel that it does pull better in the 5-6k range where it felt the turbo was running short previously, though it may just be placebo effect. Either way the sound alone is worth it, I would highly recommend this product.
Jordan K.12/11/2018, 07:08 AM
Excellent product. No issues with the install and the engine runs great. Don't let the video fool you, the sounds are very subdued. Actually can't hear a thing inside the car with the sound system on low volume, and with the sound system on mute you can barely hear it. Roll the windows down and you can hear it, but it is not ricer at all. Very classy and fits the nature of the car perfectly. Love the bracket, BTW.
I recently bought and installed this on a 2018 Mazda 6 GT. LOVE the sound. One BIG note: The opposite end of the SRI tube where it connects to the factory plastic to turbo is an absolutely horrible transition. I know that the battery is mostly the reason that the oem piping is so narrow and restricting BUT are there plans to address this? If not I may do a battery relocate and then remove the oem plastic piping to the turbo with equal sized tubing from the SRI to the turbo.