Stickers are worth 5hp right?…So it was only logical to wrap the whole car in a GIANT sticker! Anyways, on a real note we knew that the @Halfmilespeed3 couldn’t just be fast, it had to look good and what Car Guy or Gal doesn’t want their car to look good?
We have a plan at CorkSport to wrap all of our R&D Shop Cars with an awesome blue that aligns with our “CorkSport Blue”, but we want each car to have a little unique character to it. Thinking about the halfmilespeed3 build and goal we had the brilliant idea of a split wrap…seems fitting right? Half and Half…
So what did the car look like before the wrap?
Metro Grey Mica is the color name and its pretty bland in my opinion. I added the white roof and hood accents along with white wheels to help brighten up the car, which it did, but it was time for change. Oh yeah; white wheels and track spec brake pads don’t mix, just an FYI.
So what is like to get your car wrapped? What’s the process? I can’t personally give you details as I did not do the wrap myself, but I was close to the action and watched it all come together. Respect to those that take this on themselves and to the professionals out there. It is a tedious process that requires attention to detail to get a great final result.
A local friend is a professional and was open to doing the work in the CS shop since the Speed was not in a running and driving state at the time.
Saul S. (@saulywood) did the work over a few weeks’ time in evenings and weekends. He kicked a** on a project that turned out to be a bit more difficult than expected.
Installing a wrap is a process of pulling, stretching, heating, cutting…lots of different skills and abilities to get the job done. All this has to happen without damaging the vehicle you are wrapping. It’s quite a feat.
Going through the process the build kind of evolved if you will. Luckily Saul was very open-minded to it and even a bit eager to try some new things.
Probably my favorite aspect of the wrap is the unique and new wrap from 3M. Called “Shadow Black” this wrap has a slight texture to it that depicts patterns sort of like camouflage.
We used this on the roof and in a narrow strip over the seam between Satin Black and Blue Gloss; it really added a unique aspect to the look and style and brought the two colors together. Pictures just do not give it justice nor can you feel the texture.
So let’s wrap this up (see what I did there?) with some finished images.
I have to admit I’ve fallen in love with my car again. The exterior of my car was pretty beat up and neglected with rock chips, scuffs, and just generally not well taken care of paint. With the new wrap there is a whole new rush of pride and enthusiasm to keep it looking amazing.
Lastly, and this is bit cheesy, I requested Saul to match my helmet to the car…
Why not right? It’s not just another black helmet and I love it.
With that I hope you enjoyed this sneak peek into wrapping a Mazdaspeed. Stay connected as we share more and more about the @halfmilespeed3 build…engine, seats, roll-cage, and power! At some point this season an event will open and we can actually race!
Safety first right? As much as I want to survive an unfortunate incident while racing my 650+whp Mazdaspeed3…I have a bone to pick with safety. Sometimes it’s a real pain in the A**.
Let me explain…and hopefully help you learn from my experience.
Today we are talking about how to paint a roll cage, specifically one that has been custom built to fit tightly inside the cab of a GEN1 Mazdaspeed 3. How does this relate to safety? Well…a cage is made from raw steel in “mild” or “chromoly” materials. Both of these metals will corrode/rust over time. Not only will this result in a very ugly cage inside your car, but it could eventually affect the structural integrity of the roll cage, and that would defeat the whole purpose of it.
With that I decided to paint the roll cage in my Mazdaspeed 3. I daily drive and race the car AND I live in the PNW which has lots of rain and moisture. In fact, in the couple weeks that I did drive the car with the raw cage, I was already getting surface rust build up…gross.
To add to the difficulty, the cage in my Mazdaspeed was custom built from scratch vs a kit so it was very tight fitting and I have extra “X-bracing” added for increased roll over protection. This just added to the amount of surface area to paint and the number of locations with bars very close to each other.
The roll cage/hoop in my #halfmilespeed3 is technically a 8-point cage with an added X-brace in the main hoop and between the rear strut braces. The X-bracing is what helps with high speed roll over protection, but with a weight penalty. Go look at any modern rally car and you’ll see X-bracing plus lots more.
Ok, time to get our hands dirty. Here are the major items you will need to paint your cage:
Paint – I used a rust-oleum paint & Primer Combo. Make sure it works with a metal surface. 2-3 cans will be needed to complete the job and I’d suggest a high gloss enamel finish. It will be much easier to clean.
Safety Equipment – Goggles, Face Mask (a real one with a rating for fine dust), Bunny Suit (because you will get paint ALL over you), Gloves
Scotch Brite Pads – You will need this so you can remove any rust build up (assuming it is minor, if you have a heavily rusting and rough cage then you will need to get far more aggressive)
Cleaner and Rags – Gotta clean the cage after the scotch brite process
Plastic Wrap – This is like industrial size cling wrap. Easily found at Home Depot or other hardware shops in the painting isle.
Blue Tape – A few rolls of the 1.5” will do.
Step 1: Remove everything you can from the interior (which may not actually be much if you have a cage. Take your seats out, carpet (what’s left), center console, …etc
When I had the cage installed I decided I wanted to keep the front two seats as factory as possible. With that I have kept my carpet, center console, dash, door cards, roof upholstery…other than the door bars from the cage, you would have no idea the car has a cage when sitting in the front seats.
Step 2: Scotch Brite Time! Grab a pad and start giving your cage a nice rub down. You need to go over all surfaces of the cage if you want good adhesion of the paint to the metal surface. Once done, do a quick check and I bet you find some missed spots. Get those also…
Step 3: Clean up time! Grab some clean rags and a cleaner that does not leave any residue. Clean all the cage surfaces to remove any dust and/or oil. This is equally as important for good paint adhesion.
Step 4: Time to seal up the car. My number one advice here is avoid wind if possible. This plastic sheet loves to blow away in the wind…it can be very frustrating. If you have a friend that can help, that would be a great idea.
You basically want to cover all exposed surfaces inside the car and a lot of the outside of the car. While you are spray painting, you will be creating a lot of overspray mist floating in the air. This will settle on all surfaces inside and out.
I completely wrapped my doors and door edges, inside and outside of the car a bit.
I completely covered my dash and shifter assembly.
For the roof upholstery I did not use the plastic wrap, I actually used a piece of cardboard to act like a shield. I held the cardboard with one hand, shielding the roof while I sprayed the upper sections of the cage. It was effective and much easier than plastic wrap for that area.
Step 5: Time to actually paint. First you need to get into your bunny suit, get your gloves on, your face mask and goggles. Be proud of how ridiculous you look!
Before you start spraying, make sure you are in a well ventilated area and do not have any other cars or items in close proximity; they will get paint on them.
Actually Painting: I would advise starting with the hard to reach arrears first. You are essentially painting inside a jungle gym so get to the hard to reach areas first so you don’t have to worry about touching wet paint later. I started in the center and top of the cage because I had to be in the car to do so. Then was able to get to the more outer parts of the cage while outside of the cage.
Applying the paint is a bit of an art. You want to apply smooth and consistent layers. Your hand is always moving side to side as you spray. Don’t point and shoot or you will get runs in the paint.
Do a first coat that mostly covers all the surface area, then let it tach up for about an hour or reference the instructions on the can. Then apply another coat of paint. Trust me you will find thin or missed spots.
Step 6: Get out of the bunny suit. Hahaha ya this can be a process
Anyways, I pushed my car back into the garage and let the paint cure overnight before removing the plastic wrap. I didn’t want to risk the plastic wrap touching/sticking to the fresh paint. You may not have that luxury and if you don’t I would at least give the paint a couple hours to cure before removing the plastic.
Other takeaways – this was an ALL DAY PROJECT. I thought I could get it done in half a day, but with the concerns about keeping the still installed interior looking good, I was extra cautious with the plastic wrap which added time. I also did not want to do this again later so I was extra detailed with the painting process. Checking for missed spots and thin areas after each coat.
However, the result was well worth the work and I have no regrets about painting the cage. I can now drive my car without worry of the cage getting ugly or losing strength due to corrosion. I highly recommend that you take the day or so to make this happen in your car.
I hope you enjoyed this blog and thank you for following along with the @halfmilespeed3. Stay connected (instagram, blog & “Built With Barett” video series) as we share more and more about the @halfmilespeed3 build…engine, seats, roll-cage, and power! Rolling into the Shift Sector 2021 season we will have more great content to share!
If you’re looking for big power (500+whp) potential for your Mazdaspeed 3 and don’t want to be held back by your intake system then look no further!
Benefits of a huge intake with the easy fitment of a smaller intake
Introducing the CorkSport 4” Intake system for ’07-’13 MS3 (Gen1 and Gen2). Featuring mandrel bent piping, a billet MAF housing, and a large aFe dry flow filter; you can get the benefits of a huge 4” intake with the easy fitment of a smaller intake. We went back to the drawing board for this intake to optimize both fitment and performance. Read on for details!
2007-2013 Mazdaspeed 3 4 inch Intake System
We truly started from scratch to ensure the best fitment for this intake. The main change is the way the silicone couplers attach to the turbo inlet pipe. To get the pipe as close to the engine as possible for easy fitment, we use a custom-designed coupler off the compressor of the turbo. The 4” intake pipe fits straight into this, making install just that little bit easier. The biggest change though came at the MAF housing connection.
Stay Up-to-date with CorkSport
Takes up less room than some 3.5″ intakes
Instead of using a silicone coupler between the turbo inlet pipe and the MAF housing, the billet MAF housing is TIG welded directly onto the turbo intake pipe. This further helps fitment and helped us maximize filter size (more on that later). What this means is that you end up with a four-inch intake that takes up less room than some 3.5” intakes on the market while retaining the OEM mounting points and OEM BPV, PCV, and boost vent ports. It even fits with our 51R battery box!
2007-2013 Mazdaspeed 3 51r Battery Box
The benefit of a 4” intake system is in the flow capacity. Moving up in intake size, even from a 3.5” to 4” offers an increase in maximum flow capacity. A bigger intake equals the potential for a larger volume of air ingested by the engine, which equals bigger power potential. You also increase the maximum airflow that can be read by the MAF sensor before it peaks, but you must get a tune to scale the MAF sensor.
So what does this mean for power gains?
Typically, a lower horsepower car will not see a power bump but, big power MS3’s can see an increase in power, just by reducing the airflow restriction before the turbo. While you may not quite be at a 3.5” intake’s limit at 600WHP, moving to a 4” intake will increase the efficiency of your build and reduce the strain on your turbo, with a chance at some extra ponies along the way!
CorkSport
Increasing piping diameter only does so much if you have a highly restrictive filter. We focused heavily on fitting the biggest filter we could to minimize restrictions coming from the filter. We chose aFe’s Pro Dry S material for great filtration and flow, without having to worry about an oiled filter dirtying the MAF sensor. Check out the image below comparing the new 4” intake filter to the filter used on our 3.5” intakes. The new filter’s media is larger than the entire old filter!
CorkSport
While the new CorkSport 4” Intake may be a bit different from our normal intakes, we kept the same billet MAF housing design. A billet machined MAF housing ensures accurate and consistent diameter around the MAF sensor itself vs just using a pipe or plastic MAF housing while also letting us have a TRUE 4-inch inner diameter. This ensures that once calibrated, your MAF sensor will read stable and accurately. To be extra sure MAF readings are great, we pre-install air straighteners to ensure your MAF is getting clean and straight air.
Daily drive your Speed with this 4-inch intake system
With the consistent CNC machine inner diameter at a true 4 inches and the integrated air straighteners, you can daily drive your Speed with this 4-inch intake system and have MAF sensor range over 900whp.
2007-2013 Mazdaspeed 3 4 inch Intake System
Each CorkSport 4” Intake System is made from mandrel bent 4” 6061 aluminum tubing for smooth airflow directly into your turbo. The billet aluminum MAF housing is TIG welded into position, as are all ports and brackets to ensure long-lasting strength. Each intake is finished off in a wrinkle black powder coat for a clean look that will match just about any engine bay. We also include your choice of 4-ply reinforced silicone coupler for the turbo inlet. We have 4”, 3”, and OEM diameter silicones so you can be sure your turbo with work great with the CS 4” intake. To finish it off, we include stainless steel T-bolt clamps for the connections, to prevent any vacuum leaks.
2007-2013 Mazdaspeed 3 4 inch Intake System
The CorkSport 4 Inch Intake System is a complete package that can help you make big power on your Speed 3. Increase flow capacity and filter size to help that turbo breathe better so you can make more power for longer. Check out the product listing for more images and don’t hesitate to give us a call if you have any questions! Zoom-Zoom!
