Tag: 2006 mazdaspeed 6

Posted on

The New Mazdaspeed 6 Downpipe V2– The Modular Design

The 2006-2007 Mazdaspeed 6 gets refreshed with the CorkSport V2 Downpipe in both Catted and Non-Catted setups.  There were a few things we weren’t completely satisfied with the old design. So, we sought to improve the downpipe. But How!?

Mazdaspeed 6 Downpipe Modular Design for easy installation

Modular By Design

The modular design was a significant reason for the update. In our development of the Mazdspeed 3 3.5” exhaust, we utilized a cast stainless steel bell mouth which provided us with an opportunity to take that same logic and apply it to the Mazdaspeed 6.  With the modular 2-piece design, we could increase performance and reliability while drastically improving the installation process.   

Modular components make installation easier for the Mazdaspeed 6 V2 Downpipe

That said, the new V2 design improves fitment with a single 3” pipe section and the modular v-band connected bell mouth.  No more fighting the downpipe while trying to tighten the nuts on the turbo.  Hooray!

Downpipe for the 2006-2007 Mazdaspeed 6

Quality

For both the bell mouth and the piping, we use 304 stainless steel for its excellent corrosion resistance, and it looks fantastic.  All the necessary hardware is included with the downpipe-only kit. 

What’s included

  • New Turbo Studs, Nuts, and MLS Gasket 
  • New OEM Style Flange Gasket
  • SS V-Band Clamp
  • O2 Sensor Extension Harness
All the required hardware is added to the Downpipe for the MS6

Options

Lastly, you have the option to select a catless setup or a catted setup using a high-flow metallic foil CAT.  The choice is yours, but they are both intended for off-road and racing use only. 

We hope you are as excited about this new Mazdaspeed 6 downpipe as we are! Pair it up with a new CorkSport Cat-Back exhaust to get your Speed 6 sound its absolute best! 

Connect with us

You may also like

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required
Posted on

Back & Better Than Ever – The Mazdaspeed 6 Lowering Springs

CorkSport is proud to announce the Mazdaspeed 6 Lowering Springs are back and better than ever! We made some slight revisions to promote a more consistent ride and handling but kept the ride height drop about the same as our previous springs. If you’re looking to get rid of your 4×4 fitment and add some much-needed cornering ability to your MS6, read on for more details and check out our product listing HERE to purchase!

Focus On Design

We started off by focusing on the most important aspect of a set of lowering springs: handling. The CS springs lower your Speed’s center of gravity for less body roll and increased driver confidence. Stiffer than OEM spring rates further decrease body roll and provide a sportier ride for more feedback when on your favorite backroad. Final spring rates are approximately 5.1K front and 4.1K rear. Compared to OEM, this is a larger change in the rear than the front to promote more neutral handling and less understeer.

Springs That Work

Don’t worry though, spring rates were kept mild to keep the MS6 comfortable on the daily commute. It is a sportier feeling ride, but not too drastic of a change to ensure the CS springs still work well with OEM shocks & struts. Aftermarket units work even better as they have stiffer damping to match the stiffer springs. They are not required, however, we do recommend new OEM shocks and struts or aftermarket replacements if you’re still on the original (15+ year old) dampers.

The Right Height

Now let’s get to what most of you are looking for: ride height. The CorkSport Mazdaspeed 6 lowering springs are approximately 1.6” lower in the front and 1.25” lower in the rear than OEM. This height gives reduced wheel gap that is even front and rear without being too low and having to worry about scraping on every driveway and speedbump. This is right about the same as our old lowering springs with just a touch more rake for less squat when the car is loaded up with people or tools.

Finally, the new CS springs are finished in a new color! Blue powder-coated finish ensures a great look and long lasting corrosion resistance.

Thanks for following along the CS blog and checking out the new CorkSport MS6 Lowering Springs. Be sure to check out the product listing HERE for more images and don’t hesitate to contact us with any questions, we’re always happy to help!

Connect With Us!

Get the Mazdaspeed 6 Lowering Springs

The Mazdaspeed 6 Lowering Springs are back and better than ever! Get yours and enjoy the ride!

BUY NOW

Subscribe to stay-up-to-date on the latest CorkSport News & Product Releases!

* indicates required

Please select all the ways you would like to hear from :

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp’s privacy practices here.

You may also like: