Keeping you up to date with the latest CorkSport Mazdaspeed news!
Category: Dyno
We have an in house dyno which we use to develop our Mazda performance products with. All power products are on the dyno to validate designs and theories.
Day one, was a 6-hour drive from Utah to Boise Idaho. I was supposed to head out with a couple of other Utah guys, but they were not able to make it. I was on my own for 6 and the only thing going through my head was, “I’m on my own, driving to a town I know no one in, I have zero friends and that I’ll probably be the only Mazda 3 there”. I made it my goal to make friends wherever it is I go or else this was going to be a alone and this trip would have been a waste. As I get into town I settled into my Airbnb and decided to hit the town. I only saw one speed that night but I was anxious for the next day to go to the events start.
Day two, I went to this pancake house to grab some grub and I was shaking out of excitement. I head over to Keith’s house and see four speeds outside. I immediately knew I was in the right place. I walk up to Keith and welcomes me with open arms and announces I am the only Utah guy to show up this year. I start talking to everyone and get to meet everyone who shows up and I’m having a blast every one welcoming me to Idaho and the first takeover for me.
Keith announces we will be going to horseshoe bend. A canyon drive day one, one I will never forget. It was a beautiful sight the entire time. Brett hanging out of Corey’s MX-5 MSM taking beautiful shots of everyone’s cars and even a drone in the sky.
Later that day we head off to start our first competition of the weekend, go-karting. Name of the game fastest lap time wins a prize. I can’t remember who it was that won. Then that night was BBQ night and drinks all around. That’s when I got to meet everyone else who had shown up, share a couple of beers and enjoy the CorkSport koozies that were handed out.
Day three, I woke up in my car…well because of the night before.
Saturday was a slow and relaxed day of just hanging out in the garage hiding from the rain. While we hanging out in the garage some of the Oregon guys decided to adopt me and I can join them since I was the only Utahan. I also got to talk to Dale and pick his brain about tuning and learned a bunch about speed that I had no knowledge of as well. Later that night we head off to the raceway and I’m excited to see everyone run and see lap times everyone was laying down. There were a bunch of cool cars and Barett laying down some fast times on street tires.
Day four, the last day.
Everyone meets up to say their goodbyes, have a beer or two, share some last tales. The few people that have left a great memory for me where Keith, Jordan, Anthony, Aaron, Dale, Brett, Corey, and how could I ever forget Brian. As I head back to Utah with everyone on my mind and how my entire weekend went I wanted to turn around and just stay. I had made new Mazda Friends and Family.
Those four days were ones I could never forget. The feeling of being accepted into a group of people I didn’t know and didn’t necessarily fit in with was one that cannot be explained. It can only be experienced. When I came back to Utah, I couldn’t stop thinking about my vacation in Idaho. How it ended so soon. How it felt like I started a new life for just 4 days. I want next year to come sooner so that I may meet the friends and family I now have in Idaho, Washington, and in Oregon. Thank all of you again for the wonderful experience.
I absolutely love it when the fantastic humans at Corksport approach me to blog it up for them. So let’s dive right in, no time to waste.
August is kind of a sad month if you look at a calendar. No real holidays to speak of, it’s hot and miserable across the entire United States, and with the exception of Vigil of Assumption Day(whatever that is), August is kind of boring. But, look no further than the CorkSport’s Dyno Day, Show & Shine and Drag Racing on August 25th!!! It’s almost like Christmas in August. Free stuff, raffles, food and drink but most importantly, great people. Be sure to let them know if you are coming on their EVENT PAGE!
Oh, you forgot who I am. Well, I put on one of the craziest meets for us Mazda junkies. Mazda Takeover, yeah, I’m that guy that annoys you on the Facebook groups reminding you to come and have a weekend of a lifetime. You might be wondering what that has to do with a Corksport Dyno day? I will gladly tell you.
Corksport has gotten behind Mazdaspeed Idaho’s little shindig in a big way. You see, the good folks over at CS year after year make the trek, a pilgrimage if you will to Idaho for Takeover weekend. It’s only right that we return the favor! As soon as CorkSport announced their dyno day event, posts from Mazdaspeed Idaho members flooded our local page with questions, ideas, plans and straight up commitment to making the trip to CS in August.
I might be a little biased about the Mazdaspeed Idaho group being the best group of people ever, and they are. The cars in Mazdaspeed Idaho may not be showpiece material, nor are they the fastest on the planet, but us members love our Mazda’s as if they were show cars or all out HP cars.
Hell, one member sold his Gen 1 speed and within a year picked up a Gen 2 just because he loved the community more than the other community options given his other cars, so that’s saying something about not only the Mazda brand, his local Mazda community, but it says a lot about Corksport as well. Having owned his new Mazdaspeed 3 less than a week, he was the first to commit to wanting to go with the group that forms to the CorkSport dyno day! He is beyond excited to meet the people and see the building where his car part dreams come to fruition.
As of right now, I’m guessing Idaho will roll into Vancouver with 10-20 Mazda’s, which is a huge improvement over the 4 we took last year. I’m really looking forward to this event, mostly because it gives the Western Washington Mazdaspeed and Nator OR communities another group to bond with. Which is what Mazda should be about, forming and building a strong, unbreakable community that forges lifelong friendships through one shared passion. I really hope some California members make the trip as well. It’s always refreshing to see other Mazda’s, other ideas, and other builds.
I didn’t ask my boss, I told him I won’t be available because I have race car stuff to do with my race car family. And you all should tell your boss the exact same thing, and show up for one hell of a weekend out at Corksport.
See you @ CorkSport August 25th!
Keith Eggert
CorkSport and Mazda Events July 26th, 2018CorkSport
We talk a lot about dyno testing and seeing improvements with CorkSport goodies but we rarely talk about what dynos are and why dyno testing should be a part of your build. While e-tuning using logs and v-dyno works great, tuning on a chassis dyno can be quicker and is a just a bit safer; since let’s be honest, 4th gear WOT pulls in your local area of “Mexico” can get a little sketchy sometimes. Keep reading on for some advantages of knowing your dyno numbers.
To start off, I wanted to share a little bit of knowledge of what a dynamometer (dyno for short) is and how they work. Dyno is a broad term for a machine that measures force, torque, or power. In the automotive world, we typically think of a chassis dyno that measures torque through the drivetrain of a vehicle, however, for high-level suspension tuning, shock dynos also exist. Now some of you may be surprised to hear that dynos measure torque, not horsepower. Torque is much easier to measure and can be easily converted to horsepower (HP equals torque times RPM divided by 5252 for those curious).
There are a couple names of dyno you have likely seen get thrown around: Dynojet, Mustang, Dynapack, and DynoTech to name some of the most common. Each measure power a little differently but for the sake of keeping things concise, each uses a known or controlled “resistance” to fight the vehicle’s torque that is being produced.
Dynojet and some Mustang dynos use a physically heavy drum while Dynapack, DynoTech, and other Mustang dynos use electricity or hydraulics to control the dyno’s “resistance”. Each type of dyno has its own set of advantages & disadvantages but the most important thing to remember is that they will read differently for the same vehicle. This means if you are getting your car tested or tuned on a dyno multiple times, be sure to use the same type, and better yet same exact dyno, to really see how your build has affected your horsepower & torque.
On to advantages of getting your car dyno tested. While most are not “make it or break it” changes, dyno testing can really take your build to the next level.
Bragging Rights: While an obvious one, dyno results make it much easier to compare your car to another since you have hard data to back you up. This is especially true if you are using the same type of dyno. On a lighter note, comparing your car to someone with a well-documented build can help you decide what your next mod will be.
Ease of Tuning: Consistent and accurate pulls can be had back to back on a dyno, without having to drive out to your “dyno road” after every small tuning change. In a properly setup environment, pulls will show only tuning changes instead of having to worry about every little variable that comes with on-road pulls. If your tuner is in town, having them live tune with your car right in front of them can turn a multi-week e-tuning process into a long afternoon. Plus, you won’t have to worry about an expensive ticket from the local boys in blue.
Monitoring Car Health:Friend has the same car, same mods yet are making much more horsepower? Dyno testing can show things like this that may indicate a big problem with your ride. Removing the “driver mod” from racing your friend light to light can help determine if there’s something more going on. In addition, having hard data on power & torque numbers can tell you when to stop pushing for one more psi, keeping your ride on the road and not in pieces.
New Mod Validation: Bought a part and want to see what it’s doing for you? A dyno before and after is a great way to validate your new mods and see what your next step should be. In addition, you may find out there are more benefits to a part than just max power gains. Maybe that newest part only gave you +2WHP at peak but shows gains of 10-15 through the middle of the rev range, or you can hold power to a higher RPM. Analyzing dyno graphs for more than just peak numbers is a powerful tool that can indicate how a part changes how a car feels.
Obviously, not everyone has access to a dyno and it is usually expensive to use a dyno for more than a few pulls, however, it is worth it and can give you some much-needed info about your ride while keeping you & your ride safe and out of legal trouble.
Looking for a dyno for your car? We are hosting the 2018 CorkSport Dyno Day in August. Dyno runs, food, a car show, and even drag racing are all on the agenda. Check out the Facebook event page for full details & don’t be shy if you don’t have a Mazda-we had a Fiat 500 Abarth on the rollers last year!
Good day all of my CorkSport followers. Is anyone else excited for warm weather, and track days? Now is the time to get that Mazdaspeed prepped, modded, and out to the track.
The CorkSport team has plenty of experience when it comes to track days. We have noticed in the past year more and more people have been getting into a Mazdaspeed platform, and before too long they are modding the car to test its capabilities. Derrick is our road course guy in his 2015 Mazda 3, and I am the guy that likes the 1320. So what do you need to be able to run at the track? Protecting yourself, and making sure the car is properly put together can affect if you will be able to run your Mazdaspeed down the 1320.
Clothing
You will not be able to race your Mazdaspeed unless you wear pants, and closed toe shoes. Every track you go to will require you to wear these two things. Every little bit counts especially if you have a high horsepower Mazdaspeed. We have all seen the videos of accidents happening. I would hate to roll my Mazdaspeed, break glass, and have glass bits hitting my legs. So don’t forget those pants, and yoga pants do not count to all of you lady drivers.
Helmet
Each track has standard rules when it comes to safety equipment. Depending on how fast your Mazdaspeed runs will determine what safety equipment you will need in order to race. 13.99 and faster you will need to make sure and wear a helmet. Also, if you run 13.99 and faster, you will not be able to have a passenger in the car with you. If it is your first time at the track and you run faster than a 13.99 without a helmet, the track officials will ask you to wear a helmet moving forward. Failure to comply could get you removed from the track.
Vehicle Maintenance
This is probably the most important part of the inspection process when going to the track. If you have been racing when oil/coolant dumps onto the track then you know how long it can take to get that stuff cleaned up. Here are a few things the officials look for when you are trying to race your Mazdaspeed.
They will also make you turn on your headlights when the sun goes down
These things are non-negotiable. If your Mazdaspeed does not pass any of these then the track officials will not let you run your car down the track. All you fast guys out there need to double check with your local track to see what you have to do to the car depending on how fast you run.
Additional Safety Equipment
If you do have a Mazdaspeed capable of 11’s or faster, then you will be required to do a lot more to the car in order to safely run. I would double check with your local track, but every track I have been to require you to have a roll cage, and a fire suit if you are running 11’s or faster in the 1320. Also, if you have your battery relocated into the hatch, you will need a kill switch mounted somewhere on the rear of the car just in case you roll when racing.
READERS BEWARE:
Going to the track is highly addicting. CorkSport will not be responsible for empty wallets in an attempt to make your Mazdaspeed go faster. CorkSport will also not be held responsible for pulled muscles in your cheeks from having too much fun. However, if you must modify your Mazdaspeed, CorkSport will be there to help you reach your goals! Stay safe, and ZOOM ZOOM people.
Cheers,
Luke
What Is Required at the Drag Strip? September 13th, 2018CorkSport
We are excited to announce a powerful and unique release to the CorkSport Product catalog.
Starting off 2018 with a bang; CorkSport is now an official distributor and reseller of Versatune Tuning Software.
If you are unfamiliar with what Versatune is, then have a quick read and check out what it is, how it works, some of the unique features, and why you should consider purchasing it for your daily driven or high-performance Mazda.
Versatune is a powerful engine tuning solution featuring a modern and easy to use interface. With just a simple few mouse clicks, you can unlock the full potential of your Mazda using the intuitive wizard guided install and ECU flashing process.
Versatune software makes engine calibrations as easy as 1, 2, and 3. Backed by an online tune database that provides easy access to free pre-built tunes for typical configurations of performance parts VT makes it easy to get power from recent upgrades on your car. Installing of the pre-built tunes are as simple as selecting the desired tune from the online tune database and following the flashing wizard. No tuning skills or extensive knowledge is required.
If custom tuning is more your style or you need to get into the finer details of calibration maps, then the Versatune software will work for you as well. VT software also includes a powerful tune editor that exposes the critical performance and drivability related tables in the ECU. You can custom tune your car to accommodate your specific modifications and tuning goals. 3D visualizations, table descriptions, and data manipulation tools help speed up the custom tuning process.
The best part is even if you are requiring a custom tune but don’t feel comfortable performing it yourself, Versatune has a growing network of professional tuners and e-tuners that can provide custom tuning services to help you meet your specific needs.
Over the past few months, CorkSport has had the opportunity to work closely with Versatune to further develop and grow the support for several vehicles in the Mazda lineup. Including but not limited to the 3rd gen Mazda 3, 2nd gen RX-8, and the new 4th gen ND chassis Miata.
With each of these Mazdas, we have spent countless hours on the dyno, street, and race track to fine tune calibrations and settings in this easy to use software. Each Mazda has shown consistent and reliable gains across the rev range all while still retaining OEM like drivability.
We are working on packages with the CorkSport parts you love, a custom tune to make the most of them, and a bit of a discount to get you rolling.
You can expect to see a few packages for 2016+ Mx5 in the next few weeks.
