CX-7 | CorkSport Mazda Performance Blog

July 15, 2011September 13, 2018

CX-5 Debut and US Release in Summer of 2012?

The Transportation Department published a press release yesterday (July 14, 2011) granting in full the Mazda Motor Corporate petition for an exemption of the CX-5 vehicle line from the Theft Prevention Standard and determined that the “antitheft device to be on the line as standard equipment was likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts marking requirements of the Theft Prevention Standard…”

Why do we care, you might ask? This is a key indicator that Mazda is readying the Mazda CX-5 for release in the US and based on the pattern we have seen from past models that have made an entrance into the US market, it is likely that we will see the 2013 CX-5 for sale in the US by summer of 2012.

The Mazda CX-5 will be the third model in the CX line-up, next to the CX-7 and CX-9, and will appropriately be the smallest one. Mazda said in a press release about the CX-5 that “(It) will be the first production vehicle to incorporate Mazda’s new design theme, ‘KODO – Soul of Motion’ as debuted on the Mazda SHINARI concept car, as well as the full range of breakthrough SKYACTIV technologies, including engines, transmissions, body and chassis. The CX-5 will join Mazda’s global line-up in 2012”

According to autocar, the CX-5 will be available with diesel and a six-speed manual (though the diesel is not likely to be made available in the US) and are also proposed with a double body variant 3 and 5 doors, all of which should ensure that the compact crossover not only looks good but is also fun to drive and fuel efficient.

Look out for the debut of this car at the 2011 Frankfurt Auto Show this September.

Gwynne-

July 7, 2011July 8, 2011

CorkSport Announces Release of New CorkSport Stub Antenna

CorkSport would like to announce the release of the newest addition to the CorkSport line of accessory parts, the CorkSport Mazda and Mazdaspeed Stub Antenna made for 2007+ Mazdaspeed & Mazda 3, 2007+ CX-7, 2011+ Mazda 2 , 2003-2008 Mazda 6, and 2006+ Mazda 5.

An easy upgrade to boost the look of your Mazda, CorkSport’s new shorter antenna is 2.75″ in length and will replace the oversized factory antenna. Tested to ensure they perform similarly to the OEM antenna, CorkSport antennas are anodized and made out of billet aluminum which has a long lasting, durable, black finish. CorkSport antennas come with two different size fitting studs for straightforward installation of the product that will easily attach to the Mazda Genuine antenna base.

“This product represents the beginning of what will be a string of products designed to address the glaring need for additional options in the Mazda performance accessory market,” said Rich Harris, President of CorkSport Performance. “Our ability to listen and respond to the needs of our customer base combined with our efficient manufacturing expertise has resulted in the rapid development of these products to meet the demands of our customers.”

The newest addition to the CorkSport line of accessory parts will be priced at $32, making it an easy and inexpensive way to boost the look of your Mazda. Installation for this part takes mere minutes. Simply twist off the existing pieces and install the new ones to add a custom look to your Mazda.

For more information or to purchase the CorkSport Stub Antenna, Please click here to be redirected to our catalog.

May 30, 2011September 13, 2018

CorkSport Officially Adds the MazdaSpeed Top Mount Intercooler to the Product Line-up

CorkSport is pleased to announce the latest addition to our product line-up, the premium-quality CorkSport Mazdaspeed Top Mount Intercooler (TMIC). The newly engineered TMIC is made from CorkSport’s own custom cast end tanks which are TIG welded to a 3” thick bar and plate core, providing added performance by removing the bottleneck restriction of the stock intercooler and increasing resistance to heat soak by using thicker materials. The cold pipe connection is CNC milled and drilled for a leak proof connection and all bolt holes have been capped off.

CorkSport’s innovative design allows for the reuse of the Mazda OEM plastic shroud leaving your engine bay looking completely stock; however an optional aluminum ring has been made available and can be customized to compliment the finish of any engine bay.

The CorkSport TMIC has been vigorously tested to ensure optimal characteristics. Testing completed on a SuperFlow test bench proved a 46% increase in airflow over the Mazda OEM intercooler. During the testing, the CorkSport TMIC showed an average decrease in pressure across the core by 53% and an increase in overall efficiency of 25% over the stock intercooler.

“After many months of design, testing, and data collection, we are proud to release our highly anticipated CorkSport Top Mount Intercooler”, said Rich Harris, President of CorkSport, “Our TMIC provides solid power gains and is a great value add to the Mazdaspeed 3, MazdaSpeed6 and CX-7 turbo. Pre-sales of the product have shown a strong demand in the marketplace for the newest addition to the CorkSport line”.

The CorkSport Top Mount Intercooler is available now for purchase at www.corksport.com or by phone at (360) 260-CORK. The CorkSport Top Mount Intercooler features full color installation instructions and comes with all the required installation hardware.

February 4, 2011September 13, 2018

CorkSport Top Mount Intercooler and Beyond

In following one of our ideals that our customers are the best source for new product ideas, we have been developing a Top Mount Intercooler (TMIC) for the 2.3L MZR engine. The original idea came from a thread on Mazdas247 started by azmavhockey3. The thread was started way back in August and was specifically put up to not only show us (CorkSport) that there was interest in this product, but also to get other users to input ideas and characteristics that they would like to see in a TMIC.

After getting feedback from numerous forum users we tested several designs of TMIC’s to see what would fit best with what the customer wants to see in a TMIC. The picture below shows one of our later iterations in the design and testing process.

After testing airflow, temperature, pressure, and heat soak characteristics of the above design as well as the stock design, we modified our design slightly and came up with our final version of the CorkSport TMIC. We will have a full write up on the performance and design characteristics of the TMIC posted before we release the part in late March.

Getting back to my reason for writing this: the origin of the idea. We recently revised our policies here so that when you submit a product idea through our website, we will periodically update you on the progress of your idea. If your idea is not right for us at the current time, we will inform you that your product idea submission is no longer being considered. If your product idea submission makes it to production, we will offer you the chance to test the beta version of the part (assuming both parties agree to the terms). This gives you the ability to not only say you came up with the idea, but also get the product before anyone else has the chance to buy one.

In the case of the TMIC, azmavhockey3 will be getting the final version of the TMIC a full month before anyone else because of his idea.

If you have an idea on how to improve this process or the product idea submission process, feel free to email me.

– Jake

December 31, 2010

I’m a Mazda Girl

To all the Mazda’s I’ve loved:

It started with a toss-up between an MX-3 and a Millennia. The MX-3 was amazing and built with all the fast and furious stuff a girl could even need. The MX-3 was a beautiful car, and it has the magazine article to prove it. However, I have a lead foot and the driving record to prove it, so I opted for the float-a-cality of the Millenia. Good thing too, not to long after I purchased it my commute got very long and full of traffic hell.

The Millenia began to have issues, so off it went to the shop and I spent the summer in my 1st gen RX7, a super rare convertible no less. I love convertibles! The sun, the wind, it was the best! But like any older car with rotors and a history of drama, I knew it would be a short-lived love affair. Plus, convertibles in the Northwest during the rainy season are zero fun; cold and leaky.

Next up was a MX-5 Miata ‘M’ edition. I loved the car. It was fun to drive, took corners like a dream and was super sporty, really the perfect fit for me. But like all good things, it too came to an end.

Then came the CX7, wow, I could haul my skis up a mountain AND it had a turbocharger! What more could I want? Better long-term leasing options, could have solved that problem. Good by CX7 I’ll miss you…

Next up was the Tribute – purely functional, good for camping and that’s about it. No love lost when this one went to a new owner. It drove like an old, slow, tired, beast, but it got me to my next Mazda.

Wee, this is a great car, sporty, fun and I can get my kayak partially in the wagon (though with most of its 13ft hang out the back-end). I refuse to put a rack on the roof, in my opinion it would wreck the look of the car. It has been the only car that I have actually installed parts on. Even without a turbocharger it has proven to be a fun car to drive with great handling and plenty of gitty-up on the freeway.

I have two other affairs, a second gen RX-7 convertible and an RX-8. Both out of this world and not even remotely daily drivers. Their beauty and engine tenacity make my day when I have the opportunity to drive or ride in either. My grumpier half won’t give up the keys to the RX-7 since it’s big engine swap. Apparently it has so much power that my husband fears I will either kill myself while I whip the crap out of some poor Honda dork or there will be a high-speed police chase. My vote it would be some combination of the above, while on the way to Mexico.

I’m a Mazda girl now.

– Kelly