By replacing the stock springs with the CorkSport Lowering Springs, the center of gravity is reduced on the Mazdaspeed 3 providing a quicker turning response and overall crisper road feel. It also has the added benefit of creating less wheel gap which gives the car a performance appearance and edge over the stock springs.
The CorkSport Lowering Springs reduce ride height by approximately 1.2” in the front and 1.0” in the rear resulting in improved handling and a more aggressive stance. The linear spring rate creates a consistent and predictable driving experience, all while maintaining excellent ride quality for your Mazdaspeed 3.
“I really like the way my ride handles with the new sport springs. I have better road feel and increased handling on corners,” said CorkSport customer Illiad Boyce about the new lowering springs, “Even my girlfriend commented on the way the car rode. They are stiff like they should be, but not too stiff to be jarring.”
Crafted from high tensile strength spring steel with an OEM finish to ensure long lasting quality and performance, this lowering spring kit is durable enough to offer quality performance for ages to come! The lowering springs improve both the handling and look of their Mazdaspeed 3’s.
Seattle based, CJ Ramos, was dreaming of speed from the moment he test drove his 2008 Mazdaspeed 3. He was immediately attracted to the car because of its competitive price point and the positive praises it was receiving from the media, but it was way that the car handled and performed during the test drive that sold him on making the purchase.
Since then CJ has invested time and money into his Mazdaspeed and it has paid-off. He has won numerous awards for his ride, the most recent being the 2011 NOS Forum Fest – 1st Place Best Mazda 5Door – and aside from being sponsored by CorkSport and Speedware Motorsports, he was also the 2009 Hypertech SEMA booth car and has been voted car of the month and car of the year on the Mazda3forum, where you will regularly catch him doling out great advice and discussing the latest in Mazda performance with other like minded enthusiasts.
The mods on his Mazdaspeed are numerous. The engine and drivetrain feature a CorkSport turbo-back exhaust, , which includes the CorkSport downpipe,racepipe, and cat-back exhaust. He also added a CorkSport FMIC and stainless brake lines, a CPE motor mount, Devil’s Own Meth Injection Kit, PTP fuel pump internals, Cobb Access Port, Forge bypass valve and TWM short shifter. The mods on the suspension and wheels help to control this powerful car with COBB Front and Rear Sway Bars, KW V2 Coilovers, SPC Rear Camber Kit, GTSpec Bracing, Enkai NT03+m 18×9.5 and Goodyear Eagle GT All-season tires.
Not only is this car fast and powerful, but it looks and sounds amazing thanks, in part, to some extensive interior and exterior mods and full sound system that include an Autoexe JDM Front Bumper, Carbon Fiber OEM style hood, angel eye kit, CorkSport skid plate, Sparco R700 Alcantera Seata, Alpine PDX1000.1 1000w Subwoofer Amplifier, Alpine PDX100.4 100wx4 Multichannel Amplifier, and six 6.5” Elemental Designs e3.6 subwoofers.
As a new father of baby boy, Avery, CJ joked “I was telling people that if and when I become a father, I wouldn’t have to trade in my car. The trunk can hold all of the stroller and baby gear and the 4 door format can make taking the baby in and out easier than a 2 door coupe.” He said, “But now that I have a kid, the car is filled with show car goodies like my Speedware harness bar and a subwoofer trunk setup.” Fortunately, CJ’s fiancée and best friend, Lanie is caring and totally supportive of his car modding addiction.
You can catch CJ and his Mazdaspeed at Import Faceoff and Battle of the Imports this summer or can catch him online on any one of the five forums he frequents, nw-built.com, mazdasnw.com, mazda3forums.com, bcmasdas3.com, or mazdaspeedforums.com.
Interested in submitting your car for our new featured car of the month? E-mail Me!
Gwynne –
Full List of Modifications:
Engine & Drivetrain
– Corksport Turbo-Back Exhaust- Both Cats deleted
– Downpipe
– Racepipe
– Cat-back exhaust
– Corksport Front Mount Intercooler Kit
– relocated intake to the OEM TMIC location
– turbo inlet
– front mount intercooler
– Corksport Stainless Steel Brake Lines
– CPE Motor Mount
– Devil’s Own Meth Injection Kit
– PTP Fuel Pump Internals
– Cobb Access Port – Stage 2 OTS map
– Forge Bypass Valve
– TWM Short Shifter
Awards/Achievements
– 2009 SEMA Booth Car – Hypertech
– Currently Sponsored by Corksport Mazda Performance Parts and Speedware
– Motorsports
– 2010 NOS Forum Fest – Best Mazda
– 2011 NOS Forum Fest – 1st place Best Mazda 5door
– 2010 GaragePlus Import Car Show – Best Mazda
– 2010 Battle of the Imports – 2nd Place Mazda
– mazda3forums.com November 2010Car of the Month
– mazda3forums.com 2010Car of the Year
Featured Car of the Month – July 2011 July 11th, 2011Derrick Ambrose
CorkSport would like to announce the release of the newest addition to the CorkSport line of accessory parts, the CorkSport Mazda and Mazdaspeed Stub Antenna made for 2007+ Mazdaspeed & Mazda 3, 2007+ CX-7, 2011+ Mazda 2 , 2003-2008 Mazda 6, and 2006+ Mazda 5.
An easy upgrade to boost the look of your Mazda, CorkSport’s new shorter antenna is 2.75″ in length and will replace the oversized factory antenna. Tested to ensure they perform similarly to the OEM antenna, CorkSport antennas are anodized and made out of billet aluminum which has a long lasting, durable, black finish. CorkSport antennas come with two different size fitting studs for straightforward installation of the product that will easily attach to the Mazda Genuine antenna base.
“This product represents the beginning of what will be a string of products designed to address the glaring need for additional options in the Mazda performance accessory market,” said Rich Harris, President of CorkSport Performance. “Our ability to listen and respond to the needs of our customer base combined with our efficient manufacturing expertise has resulted in the rapid development of these products to meet the demands of our customers.”
The newest addition to the CorkSport line of accessory parts will be priced at $32, making it an easy and inexpensive way to boost the look of your Mazda. Installation for this part takes mere minutes. Simply twist off the existing pieces and install the new ones to add a custom look to your Mazda.
For more information or to purchase the CorkSport Stub Antenna, Please click here to be redirected to our catalog.
CorkSport Announces Release of New CorkSport Stub Antenna July 8th, 2011Derrick Ambrose
Though little is still known about a possible RX-8 successor, the latest from Autocar includes reports of new laser ignition technology that would replace the spark plug ignition system currently used in the Wankel motor. The implication comes after a comment made by a senior engineer at Mazda that said the upcoming rotary sports car would use a “special kind of ignition system”.
The engine, internally dubbed the “16X”, would be using the laser ignition to create a more complete and controlled method of ignition for each combustion chamber allowing the rotary to run leaner and more efficiently. This would allow the new rotary to pass the upcoming European emissions regulations which the current RX8 is unable to do.
The lasers are said to measure 9mm in diameter, making them compact enough to fit in the engine and should actually require less space than a typical spark plug. The new rotary set-up will likely require a smaller hole tapped into the combustion chamber of the engine which would also lend itself well to Mazda’s aim at making a more compact and lighter weight engine. It also promises to offer more torque, in part, due to the larger 1.6 liter capacity.
There has been no word of the technology filtering down to the conventional combustion engine, but if the laser ignition concept worked well, it is conceivable that it could be applied to piston powered engines as well for improved power and could potentially enhance the combustion process. As a matter of fact, the laser ignition technology is not all that new, Ford was working on something similar in 2009.
Overall, the 16X is looking to be a promising engine and if Mazda is able to solve the issue of cost, the next rotary could be a leaner, more efficient engine with more precise timing.
Gwynne-
Are the Spark Plugs’ Days Numbered? September 13th, 2018Derrick Ambrose
As we continue to ramp up our CorkSport product line, we have been making some changes to our internal processes to increase delivery time and refine the look and design of the CorkSport brand of products. The latest investment we made is the Epilog Mini 24 Laser etching machine. Why, do you ask, would we get one of these? The laser etcher has a combination of flying-optic design and the highest quality engraving results. This provides a precise etch on a variety of materials and allows us to give you a larger selection of CorkSport logoed products with the highest quality results and precise imaging.
For example, we were originally having our MAF housings for the SRI intake machined, anodized, and then machined again for the logos. This increased the manufacturing time making it more difficult to keep it in stock and available for immediate delivery. Once we made the switch to etching our logo onto the MAF housings with the new laser etching machine, it sped up the time it took to manufacture, which meant keeping more in stock and reducing backorders and delivery times.
We also began using the machine to laser etch our logo onto the CorkSport Mud Flaps. Now, rather than applying a vinyl logo, we are able to offer the mud flaps with a durable etched logo that has a superior look that will never rub off. You can pressure wash our mud flaps without any worry of damaging the logos.
On a side note, if you want to have a custom set of logoed mud flaps made, contact Chris and he can hook you up with that.
Now that we have more flexibility with our branding process, if you have an idea of something that you would like to see branded, let us know!
