CorkSport is proud to introduce the first and only performance transmission motor mount for GEN3 Mazdas. It’s a simple upgrade that can really change how shifting feels in your 2014-2018 Mazda 3, 2014-2017 Mazda 6, or 2013-2018 Mazda CX-5. We saw how an upgraded mount can drastically affect the characteristics of your car with our Mazda 3/6/CX-5 RMM and wanted to take the next step in getting the best driver feel you can out of your car.
We followed a design similar to the OE mount to ensure proper fitment and function for all engine and transmission options. Whether you have a 2.0L Mazda 3 Auto, a 2.5L Mazda 6 Manual, or anything in between, the CorkSport TMM will bolt right in with no issues. We even retained the OE battery tray mounting location to ensure the battery stays stationary. Don’t be mistaken though, the CorkSport Mazda Transmission Motor Mount is a completely different mount than OE.
The OE mount uses relatively soft rubber to ensure the least amount of noise and vibration makes its way into the cabin. It also allows the engine and transaxle to move around a surprising amount while accelerating, decelerating, or changing gears. By using 70A durometer polyurethane, the CorkSport TMM helps to lock down the engine and transaxle for better throttle response, less wheel hop, and much-improved gear changes. When we first installed a prototype TMM in the CorkSport Mazda 3 racecar, we immediately noticed the lack of delay and slop coming from the transmission when setting off from a stop and changing gears.
Don’t think we forgot about vibration and noise though. The size and stiffness of the polyurethane pucks were chosen to help minimize the adverse effects of stiffer mounts. That being said, there is still some added vibration and noise, most noticeable in automatic cars, when lugging the engine, and/or when using the A/C system. Once you are up and cruising on the highway, however, the added NVH is virtually eliminated solely by road noise.
Much like the CorkSport RMM, the TMM uses billet aluminum for the main body of the mount. After machining, it is anodized black for durability and finished off with a laser etched CS logo. A zinc-coated steel sleeve is used through the center of the bushings so you can be sure that your mount is tightened to spec. Finally, stainless steel is used for the hardware, angled mounting plate, and side washers. All of these materials were selected for their strength and corrosion resistance so that your CorkSport Mazda TMM will stand the test of time.
The CorkSport Mazda 3, Mazda6, and CX-5 Transmission Motor Mount will liven up you GEN3 whether you use it as a daily driver or racecar. The TMM is even better when combined with our RMM however, it works standalone perfectly fine. While not for everyone, those who are willing the sacrifice a little comfort for a boost in driver feel will love this mount.
Transmission Motor Mount for Mazda 3, 6, & CX-5 September 13th, 2018CorkSport
We are in the process of designing and producing a CorkSport Transmission Motor Mount, (TMM), to reduce the excessive engine movement present from the factory. Buckle up as we go through a sneak peek at some features and go through the design process and decisions that all serve to give you a better mount in the end.
When approaching this project we sought out to improve the performance of the GEN3 Mazda 3 without sacrificing drivability or OEM fitment. Stiffer motor mounts are a great way to improve throttle response, improve shift feel, and reduce wheel hop by reducing the total amount of engine movement but they can hugely increase NVH (noise, vibration, and harshness). As such, there is a balancing act between finding an acceptable level of NVH for the performance gains you get.
In a typical front wheel drive car the engine is mounted in a transverse matter, that is, the engine is parallel to the axle centerline. So when the engine tries to turn the wheels, the force to do so tries to make the engine rotate in the opposite direction. Motor mounts resist this motion of the engine.
Initially, we wanted to change the orientation of the factory mount for the Mazda3 to use the polyurethane bushings in the most optimal way possible as the bushings function best when they are parallel to the axis of rotation. Doing so proved to be difficult as we were effectively creating a new pivot point in the system.
Going through this design, we also realized that overall size was becoming a problem as different transmissions have varying heights. Since this mount sits right above the transmission, this was a vital thing to keep in mind. So for our 2.5L manual Mazda 3, we had a good amount of room below the mount, but it needed to go on a serious diet to fit an automatic model. This meant moving to a drastically smaller bushing which likely would have increased NVH, only using the mount for manual models, or using a custom bracket for each different transmission & model. Check out down below for one of the early (and ugly) designs.
So we went back to the drawing board. We decided to move forward with a design similar to the OE design. Doing so allowed for a smaller mount, easier manufacturing, and a significantly wider applicable model range. This includes all 2014-2016 Mazda 3, all 2014-2016 Mazda 6, and 2013-2016 CX-5 (we have not confirmed the 2017+ models years yet, but there’s a good chance this will be compatible).
Even though we went to a similar design to OE do not assume it’s the same thing. The CorkSport mount has the same diameter bushing as the OE mount; however, the OE mount does not utilize all the available space. This means that in addition to the stiffer polyurethane material, there is simply more material to resist the engine’s movement.
The CorkSport TMM utilizes billet aluminum for the main body of the mount with stainless steel plates for the washers and the angled section of the mount. This provides a more attractive and lighter mount than the OE offering while retaining the same strength and fitment of OE. Check out the picture down below for a look at one of our 3D printed prototype test fits.
We just received our first functional prototypes for further fitment and testing since 3D printed plastic parts don’t support an engine & transmission very well. With these samples, we can determine exactly how stiff to make the polyurethane and finalize the best possible design for you. During our test fit, we even noticed some deterioration of the OE mount.
This OE mount came off of the CorkSport Mazda 3 racecar. While it does not have many miles, they have all been racing miles that are very hard on all vehicle components. Check out the image down below to see a comparison between the used mount (left), a new mount (center), and the CorkSport prototype TMM (right). It’s interesting that Mazda has made some changes to their OE mount in the last few years. What you can’t see very well is that the racecar’s mount has areas where the rubber is starting to separate from the metal center section of the mount. There are even a few small tears forming on some of the inner bushing surfaces.
These signs of wear are encouraging to us at CS since this means we are helping to solve a potential problem facing 2014+ Mazda3 owners. As such we could not wait to get the TMM on a car for testing. Fitment is great so far, and we were even able to overcome some minor manufacturing errors. The first test for the mount was with the CorkSport Mazda 3 racecar at the 25 hours of Thunderhill. This event is an endurance race that runs for 25 hours straight.
The Mazda3 completed 613 laps during this time covering over 1800 hard miles. This is a torture test for any part, and I’m happy to report that the CorkSport TMM passed with flying colors. The drivers liked the mount and Derrick (who owns the car) reported greatly reduced slop in the transmission when shifting. Here is what the mount looked like after the 25-hour long race:
Aside from being very dirty and having a few scratches where it was bolted down, the mount had no issues and was still in good working condition. It already has a new home in a daily driven Mazda 3 to get even more testing done. Initial impressions are good, but we will look to decrease NVH as much as possible before any of you get your hands on it. Look for the CorkSport 2014+ Mazda 3 Transmission Motor Mount in the next few months.
Sneak Peek at an Upcoming Transmission Motor Mount January 25th, 2018CorkSport
For many people across the USA, the days after Thanksgiving means one thing. To them, it’s the start of the Christmas season. The beginning of holiday shopping, pumpkin spice lattes, and the best home cooked meals you can’t wait to dive into.
However, for a small select few group of individuals and teams, it’s a time for something completely different. It’s a time to see what you are made of, a time to put it all out on the table. A time where you know if the past year of planning, testing, and preparation are about to reward you greatly or tear you down completely. It’s the time where you hope to be able to stand up on a Sunday at noon and can say proudly “I survived the 25.”
For those lucky few (some call them crazy or stupid) the weekend after the Thanksgiving Holiday is what you might call a different type of holiday.
For the past 15 years, the 1st weekend of December is when some of the worlds best pro and amateur drivers descend upon a small city in Northern California known as Willows. Just on the outskirts of this quaint little city lies a little well-known road course titled merely “Thunderhill.” Now what makes Thunderhill so unique, well it’s probably the fact that this venue host the longest and most extreme endurance race in all of North America. For 25 hours straight; teams, coaches, drivers, and fans endure the rain, cold, dark, lack of sleep and more to try and make a name for themselves, and this year CorkSport did just that. Made History…
While attending the 25 Hours of Thunderhill is nothing new for CorkSport as we have spent the past several years supporting Mazda North America and their racing efforts with logistics, crew, and parts. This year was the first year where we entered a new team ourselves and brought our car, crew, trailer, and everything else you need to try and survive 25 hours of racing.
Sadly MNAO did not attend this year so it was up to us to make sure that the brand and name would make a forceful showing at the event and that is precisely what we did.
To start this whole thing off, we brought out our 2016 Mazda 3 GT. You guys are more than familiar with this car as Co-owner, and founder of CS Derrick Ambrose has been piloting this ride for two race seasons now in SCCA racing. We spent several weeks leading up to the event preparing the CorkSport Mazda3 for this daunting task.
We got extra safety equipment installed, upgraded our data acquisition package, optimized and engine tune for the 2.5L engine, and even installed some upgrade prototype pieces to have the car suited for the race.
Some of the CS goodies that were on the car during the run where our SRI, Cat-back exhaust, RMM, sway bar, and some prototype pieces like our aluminum skid tray and upgraded transmission engine mount. We needed the best parts we could get in there if we wanted to be competitive and make history.
No one has ever raced the 3rd generation Mazda 3 for this long in any endurance race. This car started off just like any other Mazda 3 and still retained a full OEM chassis, transmission, and engine. The engine internals where untouched and the transmission received a CorkSport LSD.
The team showed up on a brisk and cold Thursday morning, and we went to work. We immediately set up and got the drivers briefed. We got some practice in on Thursday followed with some qualifying on Friday all to be prepared to push this car to the limit for 25 hours. The team grabbed the pole position, and we were 1.5 seconds ahead of the next car which was fantastic. It showed we had the pace and ultimately the faster car. Fast forward to Saturday, and the flag drops green.
We had a great start and excellent drivers in the car. We struggled a bit through the night with consuming tires at a rate faster than we had anticipated and also had a few issues with how quickly we could get fuel into the car, despite the problems the team and the car pushed through the night. With just a brake change and tweak to the exhaust through the night, we maintained a good pace that ultimately got unwound due to the fuel issue mentioned above.
There was a Miata in our class that could get better fuel economy and tire consumption and slowly crawled there way up to lead during the night.
As the sunlight begins to break through, we are in a healthy 2nd place but a bit far off the leader, however, it does not worry us too much as we still have a shot at a win. Things were looking good till right about hour 22. One of our driver’s radio’s in and let us know he lost 4th gear (that’s not good). None the less we keep pushing knowing we have a spare transmission should we need to swap.
Now at hour 23 we get another message. “I lost 2nd gear” The transmission has now lost two gears, and we get a bit nervous. The car is still going and driving strong but our lap times do suffer from not being able to use all of the gears. After a quick powwow with the team, the decision is made to leave the car out on track and finish the race between 3rd and 5th gear.
With only 2.5 hours to go swapping out the transmission did not make sense as we were very secured in 2nd place. So we did just that and pushed on through, and you know what happened? We did it. While we didn’t get the P1 spot like we had wanted we did what no other SKYACTIV-G Mazda3 had done before.
We survived the 25. We proved the chassis and the platform, we pushed harder, longer, and further than absolutely anyone else has. The car was relatively unscathed, and minus the transmission, the vehicle performed excellently. All of the CorkSport parts did precisely what they needed to and outperformed all expectations.
We took the 3rd gen platform and solidified it as a competitive car and chassis that can be used and used well at all levels of motorsports.
So, what happens next?
The Mazda 3 made it back home and now lay dormant inside of HQ. We will be spending the next few weeks going through a ton of data and running through the car with a fine tooth comb.
We’ll take the transmission apart and see what her demise was. We’ll likely strip the SKYACTIV 2.5L down as well to check out what two years of racing looks like on her. The oil is already out of the car and on its way to the lab so be sure to stick around and see what we find out there.
Now one of the great things about this is what our success brings to the community. Everything we learned here can and will be applied to all of our parts and products moving forward. When we win, you guys all win. So, celebrate our accolades with us and wish us luck as we begin to prepare for the 2018 race season.
Do we tackle the 25 hours again next year? Do we show up with a turbocharger and more aero? And do we fight our ways to a P1 finish? You better believe I am going to try.
25 hours of Thunderhill February 21st, 2018CorkSport
We are working on our blog, We will get you the best Mazda content back up shortly