Mazda 3 | CorkSport Mazda Performance Blog

March 8, 2011December 18, 2017

Flo-Rida!

The SFLA Mazda Crew hosted their second Epic Florida Meet at Lou Bachrodt Mazda on Feb 21st and CorkSport was invited to attend. Agreeing to attend and getting to the event which was 3230 miles away made for some tough choices for us. We decided to forego bringing a booth and parts show up with a backpack full of t-shirts, can koozies, and the new CorkSport license plate frames to hand out.

Lou Bachrodt Mazda is located in Coconut Creek which is about 45 minutes north of Miami Florida. The weather for the event was beautiful, 80 degrees with a light breeze all day. Compared to Vancouver, WA which was 45 degrees and cloudy, it was a huge difference for winter weather.

RX-7s

160 Mazdas showed up to the event and they ranged from a beautiful 1971 RX-2 to a 3 Rotor 1000+ Hp RX-8. The RX-8 was a beast with a turbo the size of my head.

RX-2

RX-8

There was a portable dyno on hand for the day but it suffered a failure which kept anyone from getting pulls completed. The failure occurred when the first car was on the first power run.

There was a great turnout of Mazdaspeed 3s, both 1st and 2nd gens. There were several standouts I saw at the show for both generations.

A visit from the Red Bull girls kept everyone going all day long. The aftermath at one of the garbage cans shows the carnage of drinks consumed.

I would like to give a big thanks to the SFLA Mazda Crew for organizing the Epic Meet and Lou Bachrodt Mazda for hosting the event. For more pictures of the event check out our CorkSport Facebook Page.

Hosting a Mazda enthusiast event this year? Contact us and we might just show up.

– Derrick

January 24, 2011February 11, 2011

PRESS RELEASE: CorkSport Rear Chassis Brace Set 2004 – 2011 MazdaSpeed3 & Mazda 3

CorkSport’s Rear Chassis Brace Set for the 2004-2011 MazdaSpeed 3 & Mazda 3 is a direct direct bolt-on one inch diameter four bar kit that stiffens up the rear-end of your vehicle’s chassis. The bar set requires you to trim a small amount of carpet out of your cargo area and utilizes stock mounting locations.

The four bar kit installs in about an hour and a half and includes all the necessary hardware to complete the installation. It fits with all existing (three bar set available if you already have our Quick-Release Rear Chassis Brace) and future CorkSport brand parts and offers a design that will set your 3 apart from the crowd.

Features:
The CorkSport Rear Chassis Brace Set utilizes powdercoated 0.25” steel brackets that mount to factory locations on the side of your cargo area and are completely hidden behind the trunk carpet except for the bar mounting holes. The bottom mounts are small and stay close to the corner of your hatch to minimize taking up precious cargo space. The bars feature a black anodized aluminum design with our CorkSport Logo etched into the bars (the two shorter bars do not have the logo). The top bar is attached to the brackets by aircraft grade quick-release pins that allow the bar to be removed quickly and effortlessly in an event that you need to fold down your rear seats and haul a large object in your 3. The end links are threaded for full stiffness adjustablility. Turn the bar one way to stiffen the rear end, turn the bar the other way to lessen the stiffness.

Testing:
The CorkSport Rear Chassis Brace Set has been tested on our own vehicles to ensure fit, form and function. The bar set increases stiffness in the rear end by tying load points together. This results in reduced chassis flex that is a common issue with the hatch-back’s open cargo area design. We have tested the design and with the bars installed, you can expect to see a 12% decrease in rear end deflection.

Available Now:
As with all our CorkSport Brand Mazda Products, the Rear Chassis Brace Set ships with all the hardware you need for installation. Full color step by step installation instructions and telephone technical support are also included with your purchase.

January 20, 2011September 13, 2018

Aftermarket Parts and your Warranty

Now that our CorkSport Power Series Short Ram Intakes for the 2.3L DISI turbo-charged engines are 50-state legal (Press Release), I would like to revisit a past blog post as I think it is important for every car owner to understand.

A little over a year ago, we put a blog post on our webpage that outlined some of the laws and tips regarding your vehicle’s factory warranty and aftermarket parts you put on your vehicle. The Magnuson-Moss Warranty Act (US code – Title 15, Chapter 50, Section 2301-2312) was put in place to make it illegal for your dealer to void your warranty just because you put a non-OEM part on your vehicle (see SEMA Article). However, if you bring in your vehicle for a warranty claim, and it was obvious that the aftermarket part caused the issue, then you are out of luck.

The best way to avoid an issue is to have a good relationship with your dealer and to know in advance how accepting they are of vehicle modifications. Even though you have the law on your side, if they are not accepting of your vehicle modifications, you may want to find another dealer. No one wants to spend time dealing with a lawsuit or fighting over something that you can just as easily avoid in the first place. However, if you do run in to the unfortunate event where you believe that your dealer has wrongfully voided your warranty, you can contact the BBB Auto Line at 1-800-955-5100.

Please note that improper installation of any factory or non-factory parts that cause damage to your vehicle, are not covered under your warranty. Also, driving through water deep enough to cause water to be ingested into the engine will not be covered even with the factory intake installed.

If you have a specific question or concern about a CorkSport product, feel free to call us at 360-260-2675 or email and we will be happy to answer your questions.

– Jake

December 31, 2010

I’m a Mazda Girl

To all the Mazda’s I’ve loved:

It started with a toss-up between an MX-3 and a Millennia. The MX-3 was amazing and built with all the fast and furious stuff a girl could even need. The MX-3 was a beautiful car, and it has the magazine article to prove it. However, I have a lead foot and the driving record to prove it, so I opted for the float-a-cality of the Millenia. Good thing too, not to long after I purchased it my commute got very long and full of traffic hell.

The Millenia began to have issues, so off it went to the shop and I spent the summer in my 1st gen RX7, a super rare convertible no less. I love convertibles! The sun, the wind, it was the best! But like any older car with rotors and a history of drama, I knew it would be a short-lived love affair. Plus, convertibles in the Northwest during the rainy season are zero fun; cold and leaky.

Next up was a MX-5 Miata ‘M’ edition. I loved the car. It was fun to drive, took corners like a dream and was super sporty, really the perfect fit for me. But like all good things, it too came to an end.

Then came the CX7, wow, I could haul my skis up a mountain AND it had a turbocharger! What more could I want? Better long-term leasing options, could have solved that problem. Good by CX7 I’ll miss you…

Next up was the Tribute – purely functional, good for camping and that’s about it. No love lost when this one went to a new owner. It drove like an old, slow, tired, beast, but it got me to my next Mazda.

Wee, this is a great car, sporty, fun and I can get my kayak partially in the wagon (though with most of its 13ft hang out the back-end). I refuse to put a rack on the roof, in my opinion it would wreck the look of the car. It has been the only car that I have actually installed parts on. Even without a turbocharger it has proven to be a fun car to drive with great handling and plenty of gitty-up on the freeway.

I have two other affairs, a second gen RX-7 convertible and an RX-8. Both out of this world and not even remotely daily drivers. Their beauty and engine tenacity make my day when I have the opportunity to drive or ride in either. My grumpier half won’t give up the keys to the RX-7 since it’s big engine swap. Apparently it has so much power that my husband fears I will either kill myself while I whip the crap out of some poor Honda dork or there will be a high-speed police chase. My vote it would be some combination of the above, while on the way to Mexico.

I’m a Mazda girl now.

– Kelly

December 7, 2010September 13, 2018

Traveling the Northwest, For Show

Today we’ve got a guest blog from good friend of CorkSport and owner of a gorgeous (CorkSport sponsored) MazdaSpeed 3, CJ!

Before the show season started, I was doubtful that there would be shows left that would keep the import car show scene in the Northwest alive. Two major show events canceled out due to economic reasons and show websites were not being updated. Fortunately for people like me, the scene did not die and the Northwest managed to put together a list of fun car events.

Import Face Off was the first show of the season and featured both a car show and drag racing. I learned a few things that day like what car owners do before the show begins (clean, shine and clean their cars some more). What they do during the show to pass the time better (bring chairs, camera, snacks, water,
canopy, and sunblock <– very important).

The next show was the Fatlace One of One Showcase at Formula D in Monroe, WA at Evergreen Speedway. This was the first big event of the year with tons of booth vendors giving away a lot of free swag, an open to the public pit area, and tons of drift action from both amateurs and pros.

On July 18, NOS Forum Fest was held at PGP Motorsports Park in Kent, WA. This was a popular event that gathered a large number of enthusiasts through the power of the internet and forums. It featured both drag racing and drifting so there was plenty of stuff to keep you entertained. With the help of Derrick and
Chris from CorkSport making the trek north and bringing 2 cars, MazdasNW managed to win the Best Forum Representation award. My 2008 Mazdaspeed 3 managed to win Best Mazda, which was my first award ever.

The farthest event I went to this year is the Excelerator Car Meet at Silverwood Theme Park in Athol, Idaho. Registered attendees were treated with admission for 2 into both the theme park and water park, which made for one of the funnest events I’ve attended.

On August 29, I decided to go north of the border into Richmond, B.C. Canada to check out the import scene there at Revscene.net’s Sausage Fest Summer Car Meet. This was the biggest event I went to this year – it had the most Hondas, the most Evos, the most Mazda 3s, and the most BMWs out of any other show or meet.

Battle of the Imports in Woodburn, Oregon was originally scheduled for September 19th but was postponed to October 2nd due to unpredictable weather conditions in the Northwest , which had clear sunny skies in the afternoon. Just like Import Face Off, this event featured a show and drag racing. 2 CorkSport Sponsored vehicles won awards that day. Best of Class Mazda for the skull themed RX8 and 2nd place Best Mazda for my MS3.

– CJ