New Product – Mazda 3 Hatchback Rear Spoiler 2019+

Enjoying your 4th GEN Mazda 3 but wanting to change up the look? Introducing the CorkSport Performance Spoiler for 2019+ Mazda 3 Hatchback. We went for an OEM+ design that incorporates the great fitment and lines of the OEM aero kit spoiler but in a much more aggressive package. Taller, longer, and with an upturned rear edge, the CS spoiler add some much needed sportiness to the look of your 3. Available in multiple finishes to suit your budget and build, the CS spoiler is a great next mod for your build! Read on for more details and check out the product listing here to purchase.

2019 Mazda 3 Carbon Fiber hatch wing

We like the OEM spoiler but were disappointed at how insignificant it looks when installed, especially when paired with the fairly aggressive OEM front lip & rest of the aero kit. The CorkSport Spoiler takes design cues from the OEM aero kit spoiler however, the design is unique to CorkSport. We started from scratch and polled the community for design opinions before settling on a final design that is both higher off of the rear hatch than OEM and extends further rearward than OEM. The design is finished off with an upturned rear edge for a great “duckbill” style look which is aggressive without being too much. You’ll be turning heads, especially when paired with CorkSport Lowering Springs and a nice set of wheels!

Forged Carbon Mazda 3 hatch wing

Fitment was equally important as aesthetics when we designed the CS spoiler. We 3D scanned an OEM aero kit wing to get the exact mounting surfaces and edge profiles so that the CS version fits just as good as OEM. We use the same mounting locations as OEM as well. This means no drilling if you’re switching from OEM aero kit to CorkSport spoiler. If you do not have the OEM spoiler you do have to do some drilling, however, Mazda pre-marks the holes for a relatively easy install! By using the same mounting locations and more adhesive mounting tape than OEM, you can be sure your CorkSport spoiler won’t be going anywhere!

2021 Mazda 3 Turbo Duckbill spoiler

The CorkSport Mazda 3 spoiler is offered in three finishes so you can choose what is best for your build. Each option uses a fiberglass base with different top layers. Regular woven carbon fiber, forged carbon fiber, and basic black fiberglass are each available. The carbon fiber options feature a UV resistant epoxy top coat for great protection from the elements and a mirror like finish. The full fiberglass option comes in a satin black coat with some light scratches and will require some finishing. We recommend some finish sanding and a final layer of paint or wrap. The shape is the same for each unit however the purchase price varies so you can really choose the best option for your build & budget.

3 options of Mazda 3 rear wing finish

Finally, each CorkSport spoiler comes with all the hardware and accessories needed for installation. This includes mounting bolts, washers, mounting tape, and rubber washers for waterproofing. We even include new replacement OEM Mazda clips that almost always break with removing the upper trim panel on the hatch! All of this comes with full color install instructions and great customer service & support!

2021 Turbo Mazda 3 spoiler fits with the body style well

So if you’re ready to take your GEN4 build to the next level, check out the CorkSport Performance Spoiler for 2019+ Mazda3. We think it’s what the OEM spoiler should’ve been and you will not be disappointed! Don’t be shy to contact us with any questions!

Connect with us:

Get the Mazda 3 Hatchback Rear Spoiler 2019+

Continue reading “New Product – Mazda 3 Hatchback Rear Spoiler 2019+”

2021-up Mazda 3 Turbo and CX30 Turbo Intake Heat Shield

Cold air vibes for your Mazda 3 turbo

Have you been waiting for the CorkSport Heat Shield to go along with a CS SRI to snag one? Well you don’t have to wait any longer because the CS heat shield is here! Whether you have the CS SRI already or want to get both at the same time, the CorkSport Heat Shield for both the Mazda 3 and CX-30 with the SkyActiv 2.5T is a great mod to include in your build. Keep on reading to see how the CS Heat Shield is able to achieve lower intake air temps that allow your motor to make power easier.

Mazda 3 turbo engine bay intake heat shield

For the Mazda 3 Turbo Heat Shield our main focus was keeping cool air supplied to the filter. The shield was designed to seal off the intake from as much heat produced from the radiator, engine and transmission as possible. This lead to a multiple piece design that is riveted together which allows us to utilize the OEM air ducting which supplies cooler outside air to the filter. The shield does not fully surround the filter because we have also found that there is cool air that also comes from the area in front of the tire and underneath the headlight while driving, helping to ensure that your intake sees as much cool fresh air as possible.

Mazda Cx30 Performance Intake Heat Shield

Now with all of this cooler air being supplied, how does it help performance? The basic concept is that since cold air is denser than warm air, your engine gets more air per cycle, and thus allows more fuel to be added to make more power. However, when a car is turbocharged, the process is a little more complicated. A turbo compresses and heats up your intake air and then sends it to an intercooler that cools the air back down. What that means is that the “colder air will make more power” generalization may not be as significant, especially with the advancements in modern turbocharged vehicles. Colder intake air does offer a benefit in the form of less stress on your turbo system. This means that your turbo does not have to work as hard to flow the same amount of air at the same boost pressure. Also a reduction in intake air temps can translate to slightly cooler air exiting your turbo compressor, which helps take some stress off the intercooler as well.

Mazda 3 turbo cold air intake heat shield installed

With all of the theory covered, let’s get to the real world results! In daily driving testing we found decreased intake air temps with the CorkSport Heatshield installed. When cruising or when it’s cold outside, we were actually surprised at the low intake temps of the CS SRI alone—there’s actually a surprising amount of fresh air that gets into the engine bay. Where the heatshield really comes into its own is when sitting stationary or driving on a very hot day. That’s when we saw our biggest improvements in intake air temp.

3 cold air intake heat shield test data

Lastly about the manufacturing, the CorkSport Heat Shield is made out of carbon steel that is laser cut and precision formed. Carbon steel was selected for its strength and lower heat transfer over aluminum. To fight off corrosion, the heatshield is powder coated wrinkle black and gives the heat shield a great look that helps it blend in with the other parts in the engine bay. Both sections of the shield are attached together using stainless steel rivets for corrosion resistance and a nice look. Lastly, we include rubber seals along the top edge of the CS Heat Shield to keep as much heat out as possible, and to prevent any unwanted vibrations or noise.

Mazda 3 turbo cold air box

If you’re looking to complement your CS SRI with some added heat protection or want to pick them up together, check out the product listing for the CorkSport Heat Shield for additional photos and video! Also, feel free to contact us with any questions you might have.