Mazdaspeed 6/Mazda 6 Rear Adjustable Camber Arms

CorkSport is pleased to reintroduce the the 1st Gen Mazda 6 and Mazdaspeed 6 Adjustable Rear Camber Arms to complement the return of the CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6!

By replacing the stock camber arms with the CorkSport Adjustable Camber Arms, you can adjust your suspension to accommodate for lowering springs or coilovers and fine tune your Mazda 6 or Mazdaspeed 6 to the appropriate camber setting needed to balance uneven tire wear and improve cornering performance.

Mazda 6 and Mazdaspeed 6 Adjustable Rear Camber Arms

Our design offers +OEM to – 4.5 degrees of adjustability along with cross camber adjustment allowing drivers the ability to align their suspension to match their enthusiastic driving style on and off the track.

Unlike other adjustable camber arm options on the market, our unique design includes spherical bearings that replace the soft rubber bushings on the OEM camber arms, providing a true attachment to the suspension of the vehicle for improved handling and road feel.

Mazda 6 and Mazdaspeed 6 Adjustable Rear Camber Arms

The ease of adjustability on the vehicle and the unique nature of the spherical bearings will provide you with improved cornering control that can’t be matched by any other options on the market today.

The CorkSport Adjustable Rear Camber Arms are also available for all Mazdaspeed 3 and Mazda 3 vehicles and back for Mazdaspeed 6 and 2004-2008 Mazda 6 vehicles. They come as a set for just $199.00.

Mazda 6 and Mazdaspeed 6 Adjustable Rear Camber Arms

The CorkSport Advantage:

  • Superior Design: Spherical bearings replace the soft rubber bushings used in OEM and other aftermarket camber arms. This will truly attach the camber arm to the suspension of the vehicle for more control and added road feel
  • Made from reinforced high strength extruded bent steel tubing: Stronger less brittle and more durable than aluminum
  • Fine Tuned Adjustability: +OEM to – 4.5 degrees of camber adjustment and cross camber adjustability for fine tuning of your suspension
  • Full Adjustment: Can be adjusted on-car with a wrench while still installed in the vehicle
  • Sold as a Set: We know you need two so we simplified the math for you by selling them as a set
Mazda 6 and Mazdaspeed 6 Adjustable Rear Camber Arms

For more information about the CorkSport Adjustable Rear Camber Arms, check the listing here!

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

Mazdaspeed 6/Mazda 6 Front Adjustable Camber Arms

We are happy to announce the return of the CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and GEN1 Mazda 6 to complement the return of the CorkSport Adjustable Rear Camber Arms. Back and better than ever, the CS control arms provide improved handling and easier wheel fitment through front camber adjustability. An impressive 4.5 degree adjustment range ensures you are able to get the camber you want. Whether you are dialing in your handling for the track, correcting your added camber from lowering, or even just adding in more camber for that new wheel and tire setup, the CS adjustable control arms are a good fit for your build.

CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and Mazda 6

The focus of the CorkSport Adjustable Control Arms is an easy modification of the OEM camber setting. You only need to jack up your car to easily access the four bolts on top of the control arm. Once loosened you can adjust as needed before tightening everything back up and lowering your car, without even removing a wheel! It’s a great setup for correcting camber from pothole damage or lowering, optimizing your alignment for the track, or adding negative camber to get the stance you want to fit that new wide wheel setup.

Stay Up-to-date with CorkSport   


Modify your Camber setting without needing to remove your wheel!

At CorkSport lowering spring height (1.5” lower than OEM), our local race alignment shop measured an adjustment range of approximately +0.5° to -4.0°. During the measurements they even complimented how easy the CS arms are to adjust! If you’re lower than CS spring height, you are able to go even more negative due to the natural camber gain of the MS6 double wishbone front suspension. While if you are higher than CS springs, you won’t be able to go as negative.

CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and Mazda 6

Truly an easy bolt-in installation with no strange handling geometry changes

Because the CorkSport upper control arms replace the entire OEM upper control arms, we knew that fitment was vital to ensure correct handling characteristics, and an easy installation. These arms were designed directly from the OEM control arms so they are truly an easy bolt-in installation with no strange handling geometry changes. With the added camber adjustment, we also verified clearance throughout the suspension travel and at all camber settings to prevent any strange noises or damage to your vehicle.

CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and Mazda 6

Long lasting strength for your Mazdaspeed6

We have put the CS adjustable front camber arms through extensive real-world testing to ensure long lasting strength for your car. We have been testing an early production unit on a MS6 for around 6 months at the time of writing. This car has been used in everything from daily driving, to aggressive driving in the twisties, to even hauling heavy loads around. Throughout all of this, the car has been setup with -3° of camber with a 255/40-18 summer tire on a 9.5” wide wheel.  We have seen consistent performance out of the CS control arms with no issues whatsoever, so you can be sure they can take whatever you can throw at them!

CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and Mazda 6

Each set of CorkSport Adjustable Control Arms is made from A513 steel for long lasting strength and durability. The camber adjustment box on the arms are gusseted for added strength and rigidity. The arms are then finished off with a black powdercoated finish for long lasting corrosion protection and a great look. Each kit also comes with brand new ball joints, castle nuts, and cotter pins to keep everything operating correctly. Plus, we upgraded the rubber bushings where the arms mount to the chassis to spherical bearings. This change ensures good consistent handling feel and reduces slop that can result from old worn out rubber.

CorkSport Adjustable Front Upper Control Arms for Mazdaspeed 6 and Mazda 6

That about sums up the CorkSport Adjustable Control Arms for Mazdaspeed 6 and GEN1 Mazda 6! Be sure to check out the product listing for more images, as well as our product video to see these arms in action. If you have any questions, shoot us an email or give us a call, we’re always happy to help!

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required