Home/Mazdaspeed 6/2006-2007 Mazdaspeed 6/Mazdaspeed 6 All Parts

Mazdaspeed 6 All Parts

All of the 2006-2007 Mazdaspeed 6 performance parts and accessories are here listed with no filters in order from new to old for easy browsing. Fitment of the parts includes the overseas MPS 6 as well.

Top view of the CorkSport Dual VTA BPV for Mazdaspeed 3, Mazdaspeed 6, and CX-7.

O-rings are used for all critical sealing interfaces.

The CorkSport VTA BPV is only 2.5” tall which compliments compact engine bays and custom intercooler piping.

VTA ports will then be utilized for medium to high boost and abrupt throttle lift-offs.

The CorkSport VTA BPV has been tested to 50psi.

Save $20.00

Mazdaspeed Dual VTA Bypass Valve [Blemished]

$279.99 $259.99

Quick view

Eliminate the heatsoak of a TMIC with the CorkSport Speed6 FMIC kit

The CS FMIC kit comes with everything you need to install on your MS6.

2.25” hot side piping and 2.5” to 3” cold side piping offers the best balance of spool time and high horsepower capabilities

A 21”x10”x3” intercooler ensures your Speed6 boost temps stay cool.

Custom wire-reinforced silicone ensures minimal expansion under boost.

Stainless T-bolt clamps are included to minimize the chance for boost leaks.

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

Quick view

Get great sealing for your upgraded intake manifold with the CS Single Runner gasket

Large single ports eliminate the divider in the OEM gasket while also allowing for enlarged ports on the engine and intake manifold

Aluminum Foamette Material offers superior sealing characteristics and reusability

Lower IM mount spacer included to prevent warpage to intake manifold or cylinder head

Pair with your Mazdaspeed port injection system

Mazdaspeed Intake Manifold Gasket

$39.99

Quick view

Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo for your Mazdaspeed

Internal wastegate setup makes install straightforward and simple.

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing

400whp+ Mazdaspeed 6 and all the power on under the curve

The easiest Mazdaspeed 3 400whp option today with functional IWG setup.

Included with all IWG turbos, a ceramic coated heatshield.

Mazdaspeed 3/6 CST4 Turbocharger

$1,099.99

Quick view

Tial is the best EWG option for the Mazdaspeed 3 and 6 and the CorkSport go to for our cast exhaust manifold.

304 stainless steel cosntruction ensures a long life of use on your Mazdaspeed.

The tial MVR EWG includes everything shown above, fitting, clamps and more to make installation a breeze with your Mazdaspeed turbo

Each Tial 44mm Wastegate includes an assortment of springs to allow you to tailor the EWG for your Speed

The compact design allows for extra clearance and easy installation in the Mazdaspeed platform.

Save $43.00

Tial Mazdaspeed 3 and Mazdaspeed 6 MV-R W...

$435.99 $392.99

Quick view

X Clutch offers a performance clutch upgrade for the Mazdaspeed 6, Mazdaspeed 3, MPS 6 and MPS 3.

The X Clutch kit includes all of the needed installation parts and alignment tool for your Speed3 and Speed 6.

The complete high horsepower twin disc clutch for the Mazdaspeed DISI platform

Save $155.01

XClutch Mazdaspeed 3 and Mazdaspeed 6 Per...

$1,095.00 $939.99

Quick view

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Mazdaspeed 4.5 Bar MAP Sensor

$99.99

Quick view

The CS vacuum block helps clean up your Mazda engine bay.

Easily connect a boost gauge or methanol system without the need for tees

Precision machined billet aluminum is anodized for a long lasting finish that looks great

Seven 1/8" NPT threaded ports offer use with a variety of fittings

Simplify your vacuum and boost sources into one location

Small size and end mounting location gives tons of freedom for install location

Vacuum/Boost Distribution Block

$49.99

Quick view

The CST6 includes a free MAP sensor for your Mazdaspeed 3, 6, or Cx7

Stock flange Mazdaspeed 3 power record holder

Billet compressor wheel with the latest tech for quick response and airflow for your Mazdaspeed

Balanced rotating assembly for durability

Stock Mazdaspeed 3 and 6 downpipe bolt pattern

The stock flange Mazdaspeed power dyno pull

CST6 Turbo Upgrade - 2006-2013 Mazdaspeed

$1,499.99

Quick view

The CorkSport Intake Manifold is the complete solution for the very poor flowing OE intake manifold.

34mm injector fitment keep the fuel low in the engine bay

Manufactured from 6061-T6 aluminum and post machined for -6AN fuel lines

2007-2013 Mazdaspeed 3 & 6 Fuel Rail Kit ...

$129.99

Quick view

Manufactured from A356-T6 aluminum and post machined for OE fitment.

All the necessary hardware is installed on the DISI-MZR intake manifold

Integrated methanol ports are machined into each runner of the CorkSport Intake Manifold

Runner inlets are post-machined to remove any excessive slag from casting.

Optional auxiliary fuel rail allows you to add four Injector Dynamics Port Injectors for additional fueling and power.

2007-2013 Mazdaspeed 3 & 6 Intake Manifold

$699.99

Quick view

Make the installation easy with the CorkSport turbo on your Mazdaspeed

Mazda from 304 stainless steel and TIG welded

The external wastegate housing is available seperately.

Dumptube for EWG Turbine

$69.99

Quick view

← Prev

1 2 3 4 5 6

Mazdaspeed 6 All Parts

About CorkSport

Shopping

Connect

Social links