Catalysts for All!

Now I know what you may be thinking – WHAT? We don’t need any stinking catalysts. But ya see, that’s the rub – those track days at the ‘ring are lots of fun, but you’re not fooling anyone when the people in the lunch line at Laguna Seca can smell your exhaust. I’ll be the first to say that catalysts serve a great purpose and beyond the evils of over-restrictive cats on stock vehicles, can be a great addition to any performance vehicle.

At CorkSport we have been listening to you, our customers, and there seems to be an interest to have the performance of a racepipe without the foul, eye-scorching smell of fuel every time you cold start the vehicle. Well, you’re in luck – we’ve recently found a source for high quality metallic substrate catalysts in a compact yet high flowing 410 stainless steel package and we plan on offering a range of products that provide these catalysts as a configurable option with our current line of racepipes.

Catalysts: How they work and their failure modes.

A catalytic converter is a device resembles a muffler or resonator – basically an enlarged section of your exhaust system that has a honeycomb structure held inside of it. The honeycomb is then coated with a substrate that creates a chemical reaction based on heat and any unburnt fuel in your exhaust system. Anyone who has used a propane space heater – the kind that glow and don’t really give off any tangible flame – has seen a catalyst at work. Substrate and brick/insert design is relatively straightforward – the more surface area you have, the more efficient the catalyst is at burning unburnt fuel. In the search for more surface area, the density of the honeycomb increases – as does restriction of the system.

This honeycomb comes in two forms – a metallic stainless foil version and a ceramic version. Based on the manufacturing process, the ceramic version must be retained in the canister with a fiberglass or vermiculite packing material around the circumference of the ceramic ‘brick’. In rotary and turbocharged applications, this material often deteriorates from excess heat and pressure allowing the ceramic substrate to rotate and/or crack.

Our catalysts

Our catalysts utilize a 200 cell metallic substrate design and have the honeycomb material all the way to the wall of the canister without any additional packing material that may deteriorate. The metallic spiral is held in place mechanically from either end to prevent movement. The canisters and tubing are made of 410 Stainless Steel and all carry a 5 year manufacturers warranty.

New products

To start with we will be offering the RX-8 Power Series Racepipe in a single resonator/single 65mm catalyst configuration (as well as a single or dual resonator configuration). We’re in the process of doing the first production run on these and hope to have them out in the next two or three weeks.

The next product we will be working with is the Mazdaspeed3 Racepipe with 80mm high flow catalyst, this should be available in the next month in production quantities.

Finally, we are also working on Mazdaspeed6 Racepipe with 80mm high flow catalyst.

Drop me an email if you’re interested in getting in on these products hot off the mandrel – we’ll have a handful of pre-tested prototypes and then full production runs of all of these products within the coming months.

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

Introducing the Corksport 2010 MazdaSpeed 3

I have to admit at first glance the Mazdaspeed 3 looked a little “off” with the smile in the front bumper.  After spending quite a few hours with the car I can tell you with a straight face, you don’t even notice it. This may be different on a Mazdaspeed 3 that is not Black Mica like ours, where there is a bigger contrast in color between the car body and the bumper insert.

What I can tell you for sure is that cleaning the front bumper is not a lot of fun.  Bugs get wedged in the strakes inside the insert quite easily and at weird angles. You have to get down low to get them all out of there. The wheels are not bad to clean nor is the rest of the body. The Mazaspeed rear wing is an interesting design, it is basically a smaller wing with another wing over it.

CorkSport 2010-2013 Mazdaspeed 3 black

Driving the car is great. The car seems to be planted better on the road compared to the older Mazdaspeed 3. I had a chance to go through some decent corners and get on the throttle a bit.  You can feel the differential really pushing the outside tire to get you through the corner.  It is quite a rewarding feeling having the car urging you to go faster. The car almost begs you to take a corner as fast as you can.  The only two initial changes I would make to the handling are to make the Mazdaspeed 3 a little flatter in corners with some larger sway bars, and lower it around an inch or so to close up the wheel gap. The Dunlop SP 2050 tires seem decent but I have not had a chance to really push them to the limit to see what happens.

The exhaust note is very subtle and is quieter than the older Mazdaspeed 3 stock exhaust.  You get a a small hint of the flat exhaust note but not a lot. The dual tips are also much nicer than what the pre-release pictures showed. The angle of the tips matching the bumper contour was a nice design touch as well.

CorkSport Mazdaspeed 3 2013-2013

There are a few items I wish Mazda would have given the North American market. Being that the sport model is the only version available we were not able to get the HID headlights and LED tail lights with the car. We’ll have to wait and see what kinds of options become available and see about changing the lights out with something better.  On the plus side this is the first car I have had to actually “speak” with the car to setup the Bluetooth, and for making phone calls.  The navigation works well from the limited places I have driven so far. I really love the boost gauge. It is a nice throwback to the old style of the turbine boost light from the 323 turbo.

So now that we have the car what are we going to do with it? Maybe a better question is what we are not going to do with it. We have quite a few projects planned for the new car.  If you want to follow along with updates to this project and other CorkSport products be sure to sign up and follow us on Twitter at https://www.twitter.com/corksport or click the “Twitter” buttons above and below.

Derrick

Stay up-to-date on the latest news and product updates from CorkSport.

* indicates required

First Look: RX8 – Power Series Dual-Resonated Racepipe

RX8 Racepipe

The last week has been a lot of fun here at Corksport. We have been working on developing a cure for High Decibel Situational Tourettes Syndrome, which effects a certain percentage of enthusiasts who run a non resonated racepipe in their RX-8.

Our latest solution is a dual resonated Power Series Racepipe for the ’04-’10 RX-8. Incorporating a 140mm primary resonator and a 100mm secondary resonator with 61mm exhaust tubing, the resonated racepipe improves exhaust flow dramatically while keeping the decibels at a level reasonable enough to avoid spontaneous profanity from drivers and spectators alike. Think your racepipe is too loud? Check out this video clip of the Power Series Dual Resonated Racepipe and with Power Series Cat-Back Exhaust on our ’04 RX-8 and let us know what you think:

Like all of our Power Series exhaust products, the Dual Resonated Racepipe for the RX-8 incorporates only the highest quality materials and manufacturing methods.  Featuring T304 stainless mandrel bent tubing, stainless oxygen sensor fittings (one for the stock oxygen sensor and a secondary unit for the use of a Wideband O2 monitoring & datalogging system), T304 resonators and flanges. All connections are TIG welded with 308 stainless rod to ensure good weld penetration and attractive finish on the weld bead.
We’re hoping to get a handful of these systems out on the street in the next month and we’ll keep you posted as soon as they’re available to the public.

We’re also entertaining the possibility of incorporating a high flow catalyst into the system to keep emissions to a minimum.  This will be a 108mm spun metallic substrate catalyst replacing the secondary resonator.  If this is something that would interest you, let me know by dropping me an email.

Next week: Short Ram Intake Cold Air Box Performance Results & Analysis for the Mazdaspeed 3 and 6.

Jason

Derrick’s Mazda Odyssey – How it All Began – Part 1

So when did you know you first wanted a Mazda?  I had my high school years skewered a bit by friends and other influences down the trail of Mazda ownership.  The first Mazda I really wanted was a 323 GTX.  Getting a ride to school in rain, snow, or any weather made me realize how unique the car was.  It didn’t help that the dual rear hatch wings and the decals down the side listing off the traits of a performance car “Full Time 4wd 16 Valve DOHC Turbo”.  I do remember seeing the 88 anniversary edition RX7s in white thinking they were cool but it didn’t have the pull the 323 GTX did.

It took 6 years before I got a chance to purchase a 323 GTX.  I found one in the back of an auto week magazine located in New Mexico.  The car was a 1988 model with no rust and had 132,000 miles on it.  After several phone calls and a generous loan from a friend I flew to New Mexico with a cashiers check for $3750 in my hand. I met the owner the airport in Albuquerque after spending a day in airports with short trips in the air at 3pm.  I drove the car to a nearby restaurant and took a look over the car.  It was a relatively stock car with the rear muffler removed for a bit more power and noise.  The interior was in good shape with no damage.  So we made the deal and I headed on my way back home to Washington State.

This being my first turbo car I did do some reading up on it.  I knew to let the car idle after driving hard for a period of time and to not stand on the gas until the car warmed up.  I had heard term turbo lag but never experienced it before.  About 3 minutes into driving the car to the freeway in Albuquerque I pulled out in between some cars to get onto the freeway.  Standing on the throttle at 1300 rpm and the car didn’t move to fast.  This whole experience stuck with me because of the large truck I had pulled out in front of that had to slow down because some fruit loop in a Mazda pulled out in front of him.  Thankfully my first run in with turbo lag ended with the car or the driver being unhurt.

The drive back to Washington was un-eventful.  The car was solid as could be and I averaged 24 miles per gallon driving through the night in Arizona and So cal to my first stop to rest.  After a night sleep I drove home the rest of the way and arrived in time for work on Monday morning.

My co-workers were pretty amused at the purchase I made.  I heard “you flew to New Mexico to get that?”  Apparently they did not have a good appreciation for fine automobiles that I did (ha-ha).

Skip ahead 4 years and the car had needs some love.   New turbocharger was installed on the car along with a refreshed cylinder head.  That was too much for the poor bottom end of the motor.  At 187,000 miles the piston rings had enough and I looked like the car James Bond with the smokescreen going full blast behind the car.  So at a crossroads of sorts I found myself wondering where to go with the car.  I had read up and seen the 90-94 323 turbo models from Japan and other markets.  Spending some time looking around I located an engine supplier who had a BPT turbo engine in stock.  After a week I had an engine sitting at home.  It took a few weeks to get the installation sorted out with the changes between the engines but I was back on the road with the BPT running on the B6T hardware.

One thing that was nice was the BPT made a lot more torque than the B6T engine.  It only took a year until the transmission let me know it did not care for the extra torque.  I had to get across the street quickly between the flows of cars in downtown Portland.  Going across the rutted street cost me the transmission.  One of the tires left the ground for a second. When it came down BANG went the planetary assembly.  I limped the car home knowing there probably wasn’t much hope for the transmission at that point.  I decided then to use the transmission that arrived with the BPT engine.

The story does continue from here and you can read all about it in Part 2.

Derrick

America Needs More Rally Racing

Watching the Polish round of WRC (World Rally Championship) racing I realized how out of touch United States is with the rest of the planet in regards to auto racing. Look at the crowds that show up at the events in all of the countries that the WRC stops at. Oh wait that’s right Speed channel no longer shows the events so it forces us to download the event via torrents of the TV shows after they happen from Eurosport.

Back to my commentary, the world (except the US) supports the WRC events.  On all of the stages you see crowds lining the roads. The spectators hike to the events just to get a chance to watch the cars blast by at a distance of 10 feet from the action. That’s right, no fences or guard rails, nothing. Stand on the outside of a corner and you can get showered with rocks or other debris (and possibly a car as if they blow a corner). You don’t hear of NASCAR shutting down an event because of too many spectators.

You also can’t match the surprises the events have. For example in an earlier event this year there were wild horses running across the roads, you don’t get that in an Indy car event. About the biggest critter you have showing up at a racetrack in the US is a rabbit. Weather doesn’t stop the events either. They will race a WRC in the worst weather including snow, mud, freezing rain, you name it.

Monte Carlo WRC round on ice covered roads shown above.

Rally racing has been in the US for years but it always seems to be out of the public eye.  The WRC did visit Washington State once in the 80s but that was before the events were really televised.  US rallying has shown up in the X Games, which has brought awareness of rally racing to the masses but it really has never caught on. I believe it is coverage of the events by racing press here in the US that is to blame for this.

You can find references about the events at the fringe. Grass Roots Motorsports (GRM) prints rally racing information from club and national US events but you never hear about anything outside of North America. Don’t get me wrong I am happy they do publish information but GRM is not exactly mainstream media. Speed channel showed the WRC for a few seasons then dropped it when they became NASCAR-vision.

You don’t get views like this at NASCAR tracks.

So if you are reading this blog post take a look out there at what the rest of the planet is up to for racing. You may be surprised at how exciting the racing can be on a gravel road at 125mph.

Derrick