The 33% Faster, 50% Smaller, 100% More Innovative CorkSport Bypass Valve

The CorkSport Mazdaspeed MZR Bypass Valve (Patent Pending)

Mazdaspeed 3 BPV Upgrade

With the new Patent Pending CorkSport Mazdaspeed MZR Bypass Valve you can have all the goodies of an aftermarket Bypass Valve, in a smaller size. By using a unique patent pending wave spring design, CorkSport was able to shrink the body of our bypass valve to almost half the size of stock. Along with this, the wave spring was tested to respond 33% faster than a stock valve. Since the blow off valve is a safety feature to protect the turbo from premature wear, this increase in acceleration can help increase the longevity of the turbo and the system as a whole. For more about all the innovations in the CorkSport bypass valve, click here.

Lightweight components ensure quick response for the BOV for your Speed3

So why do you need to upgrade? Well, the stock Bypass Valve is pretty good, but it falls short in two areas. When it comes to holding boost the stock Bypass Valve often will start leaking at anywhere upwards of 17psi. If you plan on having your boost much higher than stock you could have issues with leaks. Of course, you also upgrade a bypass valve to get that unique sound.

While the unique patent pending CorkSport Mazdaspeed MZR Bypass Valve will provide both a unique sound and hold more boost, our BPV will also provide some other key benefits that, until now, have been pretty much ignored by others.

The CorkSport MZR Bypass valve utilizes a compact wave style spring which allows the stock valve size to be decreased by half. This patent pending design allows room for other engine upgrades such as Big Intakes, Airboxes, Front Mount Intercooler setups and more. Using a wave style spring that is 20mm in height compared to the stock 40mm not only enabled us to shrink the overall size of the valve, but also shrinks response time to lightning quick speeds. Though both the stock spring and our wave spring provide the same force and move the same distance before coil-bind, a smaller wave style spring can respond up to 33% faster.

A smaller spring allowed us to decrease the overall size of the piston while still pushing the piston area out to ensure a larger venting area. This reduces the time it takes to vent air and allows any turbo, especially larger turbos, to vent more efficiently.

No matter which benefit is more important to you, whether you value long turbo life, unique sound, more engine space, or holding higher boost, the CorkSport Mazdaspeed MZR Bypass Valve should be your first choice.

To Learn More or Purchase the CorkSport Mazdaspeed MZR Bypass Valve here: https://www.corksport.com/corksport-mazdaspeed-mzr-bypass-valve.html

October 15, 2013February 28, 2018

Fuel Pump Comparison Part 4 (Bombs Away!)

We know by now that adding power to your Mazda is fairly straightforward up to a certain point. However, sooner or later, that hunger for power means you’re going to need to step up to a new fuel pump that can flow more fuel. By seeing that most of the fuel pumps on the market were largely the same, we decided to see what kind of innovations we could bring to the table. At this point we had learned volumes about the pumps on the market through our research and decided to engineer a new set of pump internals that focused on everything that we had learned.

We know this is possibly the worst kept secret since Area 51, but we started engineering fuel pump internals over 2 years ago and we aim to show you why ours is worth the wait.

We didn’t just set out to make another pump; the market has plenty of those. We set out to make the best Mazda fuel pump upgrade on the market specifically for Mazdas from a company that ONLY makes parts for Mazdas.

We started by researching many different technologies and engineering ideas in the pressure ranges experienced in these fuel pumps. We purchased every kit on the market and a brand new replacement from Mazda to test. The results from some of those tests can be found here (Link to blogs 1,2, and 3). After agreeing that 9.8mm was the maximum size we could attempt for the piston without making the sleeve wall too thin, we could start engineering the rest of the part.

We then built all the internals available in SolidWorks and tested the efficiency of them all for flow design and volume. This was merely the beginning of our design phase but helped us realize many great ideas (as well as a few not so great ones). We ended up with a design unlike any other on the market that, according to the data, would be more efficient than anything on the market.

With the increase in flow and efficiency we knew that our design could also benefit from a stiffer spring rate for the pump. That would enable higher RPM’s and improved cam wear over the life of the pump. Since we would be flowing more, the pressure on the pump would be greater than ever, the stiffer spring was just good insurance to get the power we needed even past the stock redline.

During our testing we also discovered the keeper assembly used by the factory is no accident. Many of the other pumps on the market use a keeper system similar to an intake or exhaust valve. This style does a fantastic job of locking the piston in place, but creates a few issues of its own. Because of the flow of fuel, the piston rides one side of the sleeve more than the other; over time, this will wear more into the piston which will affect clearances and efficiency. To prevent this, the factory style keeper allows the piston to spin as the spring moves up and down. That led us to choose the factory style retainer. We didn’t want to guess on either design without proof of our theory so we produced samples of both styles to prove wear differences and address installation challenges related to both styles.

Now that the cat is out of the bag, we’ll have just one more fuel pump blog next week with a very exciting limited offer. Stay tuned as CorkSport is about to take Mazda performance one step higher!

October 10, 2013December 18, 2017

CorkSport Races at Road America

Rain America

My first experience at an SCCA national championship run off was exciting and left me impatient for the next season to start. I arrived on Sunday night and unloaded the car from the transporter that Joey Jordan Motorsports graciously allowed us to use.

All of the Mazda 2s were able to pit together under the covered paddock (thanks to Mazdaspeed). We were positioned at corner 14 so we were treated to a great view of the track while we chatted each day.

On Monday I was way off the pace of the other B-Spec cars in practice. The best time I was able to get was a 3:00 flat and the fastest other B-Spec was running in the 2:55-2:57 range. This was my first time out on the track so I knew there would be some learning to do as a simulator can only do so much.

On Tuesday, during the first qualifying session a Mazda 2 was clipped in Canada Corner (turn 14) and flipped. It spun across the track and flipped back over in the gravel. The driver was ok and he hopped out saying something funny about his stunt driving. The car lost its windows and was cosmetically damaged but all of the safety equipment was still in great shape.

It took them only 3 days to get the car back together to pass tech before the race on Sunday, quite an amazing feat.

We continued to make changes on the CorkSport Mazda 2 through the week but there were quite a few black flagged sessions due to people crashing out on cold tires. I saw several cars destroyed by hitting the walls in corner 7 and the kink on the back straight.

On Saturday we decided to make some large scale changes to the car and see how they would help my warm-up STL race on Sunday. My goal was to get into the 2:58s for lap times so I would stand a chance of keeping up with the rest of the cars fighting it out for the lead. The changes worked like magic and I was able to get into the 2:57s. With a good lap time set we left the setup where it was and bolted a new set of tires on the car for the race.

I qualified in 8th place due to being off the pace on Tuesday and not getting a clean run on Wednesday and Thursday. The race was very intense, especially with the first lap cars going off the track. Joel Weinberg who was the pole sitter had his steering wheel come off in his hand and he hit the wall taking him out of the race in the first corner. I was able to pass one of the Honda Fits who missed the corner at turn 5, locked up his brakes and allowed me to move into 6th. There was also a wreck coming out of turn 7 where a few cars made contact and a Fiesta was destroyed when it hit the wall which moved me up to 5th. After a few laps the Mazda 2, which was involved in the wreck earlier, was able to get around me (he also set a new track record playing catch up with a 2:54). We did some bump drafting to try to get past the 4th place Mini but there was some questionable blocking of the 5th place Mazda 2 (including some contact). I made two errors in corner 6 which dropped me back too far to catch up. At the end of 13 laps I was in 6th overall. This meant I was sent to impound with the rest of the front runners to pass tech.

After 4 hours, a few protests, and the tech inspectors not being able to find information on the camshafts in the Minis they cut us loose to load up the cars and hit the road. After quite a few days, the results were final and I was awarded 6th place overall. In the race I was able to get a low lap time of 2:56 which was great to see from the car and myself. I believe I can do better if given more track time.
Want to watch the race? Click on this link and skip to 5:15 for the start of the T-4/B-Spec race.

Overall it was a crazy week of learning at the track. The result is not what I wanted, but to make it through the race with no damage made me happy, and there is always next year which is closer to home at Mazda Raceway Laguna Seca.

-Derrick

October 3, 2013January 6, 2020

Bring your 2014 Mazda 3 to Life with CORKSPORT

The Mazda 3 Parts Domination Starts Now!!!

The 2014 Mazda 3 has only been on our shores for a few weeks and already CorkSport is cranking out parts for it. Today we are proud to announce the release of two new parts that will really bring out the best in your Mazda 3.

If you have a new 2014 Mazda 3 you probably love the interior as much as we do. From the optional heads-up display, the new stereo, info, and navigation system, to the sporty seats, it seems Mazda really listened to those asking for a high class interior. The interior lighting looks just a little old fashioned. Luckily with some easy to install LEDs from the CORKSPORT LED Light Kit for 2014+ Mazda 3 you can replace the incandescent and yellow bulbs with the nice white light of LEDs.

The CorkSport LED Light Kit for 2014+ Mazda 3 is available now for $42.99

To purchase the Kit, or find out more, click the link: https://www.corksport.com/corksport-led-light-kit-for-2014-mazda-3.html

A fancy looking interior isn’t all we care about at CorkSport. We love power! The Mazda 3 is an amazingly fun to drive vehicle. Many say it channels the feel of some of the best handling Mazdas to date. As much as we love the handling and cornering ability, we also want to maximize the power from this high compression engine. With that in mind we have designed our popular Power Series Short Ram Intake for the 2014+ Mazda 3.

One of the easiest and most beneficial performance enhancements you can do for your vehicle, the CorkSport Power Series Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. Engineered with exacting tolerances, the CorkSport SkyActiv Short Ram Intake includes our precision machined MAF housing made from billet aluminum, a durable dry flow air filter and custom reinforced silicone connector. In initial testing with the 2.0 Liter SkyActiv engine, the CorkSport Short Ram Intake netted peak gains of +5 HP and +6 lb torque at the wheels. For all you with the big 2.5L fear not, our intake for that engine will release soon!!!

Available for the 2.0 Liter SkyActiv Engine Here: https://www.corksport.com/corksport-2014-mazda-3-skyactiv-power-series-short-ram-intake.html

September 25, 2013

Are there marshmallows at your work?

Do You Love Your Job?

(We are always on the lookout for awesome people)

People spend a large majority of their time at work. Yet they don’t like to work, don’t like where they work, or simply don’t like who they work with.

Here at CorkSport we make building our company culture an intentional part of our work day. We deal with team building, interpersonal relationships, personal development, and company values on a daily basis. We ask all our people to look into the future, challenge their intellect, and strive to be the best version of themself they can possibly be.

We live by our company values and seek continuous growth in these areas, as a company, and as individuals.

Pursue personal growth and learning
Be honest, ethical, and fair
WOW our customers, friends, and family
Never accept the status quo. Drive change.
Reach for excellence

Time and time again I hear from customers about how great our customer service is, or how wonderful it was to do business with us. That experience is because we live the above stated values. Our team is made up of some of the most amazing people. I am proud to know them. The character, integrity, and overall drive to better who CorkSport is, is nothing short of inspiring.

Sounds great right?! Yeah, I’ll just let you be a little bit jealous for a second, and then let you in on a little secret as to why.

It’s How We Hire

Getting hired on at CorkSport is no easy feat. We have what I will refer to as an extremely extensive and intimidating hiring process which is used to weed out the uninspired, the un-motivated, and the ethically questionable. It allows for the level headed, customer focused, and driven to rise to the top. Our hiring team does a great job of looking through the smokescreen and seeing a person for who they are and what they can be.

Start by turning in an application, if you’re qualified for the position; be prepared for a pretty intense follow up. After many hours of work and interviews of the top candidates, an additional 4 hours is spent with each of the top 5, then, still another hour with the president before the selection is made. You then get introduced to all that is CorkSport.

We realize that by adding someone new to the team, we’re adding them to the dream as well. We all share a vision, a dream, a goal for what CorkSport will be. Those dreams are made possible by our amazing customers. We hire passionate, driven and customer service focused individuals for a reason. That reason is you!

(p.s. the marshmellows question is because we play chubby bunny here!”

All the best,

Kim

The CorkSport Mazdaspeed MZR Bypass Valve (Patent Pending)

The Mazda 3 Parts Domination Starts Now!!!

Do You Love Your Job?

Pursue personal growth and learning

Be honest, ethical, and fair

WOW our customers, friends, and family

Never accept the status quo. Drive change.

Reach for excellence