Posts

Posted on

Product Sneak Peek – CorkSport Fall Line-Up

I attended my first research and development meeting at CorkSport a couple weeks ago and spent the morning and well into the afternoon reviewing product submissions and discussing the viability and potential demand for each of the ideas that were submitted to us.

We reviewed over forty-five product submissions and ranked them on feasibility, development time, demand, and the value it would provide to our customers. Coming out of that meeting, I think customers will be pleased with some of the fantastic products coming to market over the next six months and though we are keeping our cards close to our chest on some of the exciting products we have in store for all you Mazda performance enthusiasts, I will divulge some the new products you can expect to see released in the coming weeks.

Lug Nuts – As early as next week, you can expect to see new CorkSport Extended Lightweight Lug Nuts added to our list of performance accessories. Thanks to the feedback from our Facebook Fans, we will be offering them in black as the overwhelming color of choice. More to come on this product soon!

Shifter Bushings – Coming up before months end will be the CorkSport Shifter Bushings. Removing unwanted play in your car’s shifter mechanism, our bushing kit will greatly improve the feel of shifting in your vehicle.

Gen 1 Mazdaspeed 3 FMIC kit for SRI – Expanding on the success of our recent Gen 2 Mazdaspeed 3 release of a FMIC kit for SRI, CorkSport will be releasing a version for Gen 1 Mazdaspeed 3 drivers by the end of the month! Like our Gen 2 version, the FMIC kit for SRI will provide solid power gains without the lag commonly seen in larger FMIC kit’s that require removal of the crash bar.

Mazdaspeed 6 Rear Sway Bar – Currently on a fall release schedule, the CorkSport Mazdaspeed 6 Rear Sway Bar will greatly improve handling by tightening up the rear suspension. The Rear Sway bar can be purchased stand alone or can be used to compliment the CorkSport Mazdaspeed 6 Front Strut Bar.

CorkSport LED Under Hood Lights – Also on the fall release schedule is a kit that will illuminate your entire engine compartment. The CorkSport LED Under Hood Lights are a low power draw kit that will attach to your battery, includes an automatic on/off switch and will cast a cool blue/white luminescence on your engine bay.

These represent just some of the products you can expect to see in CorkSport’s fall line-up. More will be introduced as the development and testing process winds-up.

Interested in submitting a product idea? Fill out a product idea form for consideration at our next development meeting, https://www.corksport.com/product-ideas.html

Gwynne-

Posted on

Featured Car of the Month September 2011 – Domii’s Mazda 2

It’s not often that you come across women that take the modified car scene seriously, but if you’re a female and know your way around your car, from installing a performance exhaust system to spending your weekend’s auto-crossing, there’s a place for you in the performance world too.

Domenique first became interested in Mazda performance when she went to the NEPOC meet in 2009 with her boyfriend Jordan in his RX8. She was immediately attracted to the great cars at the Spring Clean Meet and met some great people that turned her on to a whole new world of modding and performance. By June of 2009 she was hooked and knew that she needed a Mazda of her own to mod.

Initially Domenique wanted a Mazdaspeed 3, but when she saw the 2011 Mazda 2 Sport, she fell in love. “The car was the perfect size. I loved how light and small it was and how well it handled” said Domenique, “This was my first manual, but the Mazda 2 was so easy drive, it was cake to learn.”

Wheels and lowering springs were the first priorities on Domenique’s list when she began her new project car. After talking with one of our CorkSport experts, she settled on the H&R springs and also decided to purchase a CorkSport Rear Torsion Bar to add much needed roll resistance to the rear of the Mazda 2.

“What an improvement in handling!” said Domenique, “The car not only looked much better, but the handling got much tighter and the turn response improved greatly.”

She decided to go with 15’s on the wheels to keep the weight of the car down and went with powder coated Kosei K1’s 15×7 with a +27 offset.

As her first power upgrade, Domenique installed a CorkSport Short Ram Intake which gave the car a noticeable gain in power and a nice grunt to the engine and has since added a Power Pulse Muffler Exhaust.

Future projects include a CorkSport Lightweight Crankshaft Pulley, CorkSport Front Strut Bar, CorkSport Rear Chassis Brace, tint, and a sound system.

Domenique’s new love for car modding has translated into another new love for autocrossing. On August 20th, she took the MZ2 out for the first time Auto-crossing at Renegade Miata and learned just what the car was capable of.

“I never really thought I would have been so interested in customizing a car. I guess I can blame it on my boyfriend, in a good way of course,” says Domenique, when asked about becoming a car enthusiast, “I love to go to shows and now my goal is to get better at Auto-Crossing.”

If you want to keep up with Domenique’s new and upcoming Mazda 2 projects, you can follow her progress on her blog, https://piinkdem.blogspot.com

Gwynne-

Posted on

Customer Collaboration Designs Excellence

We say it a lot here at CorkSport, but it’s true, we really enjoy getting our customers involved with the development process and as an engineer at CorkSport, I get to interact with customers on new product ideas and collaborate on their development regularly.

Many of our new product ideas actually come from customer submissions which have been collected and reviewed during our development meetings. Once we have established whether the idea submission has merits and we feel it is a project worth pursuing, it gets added to our project plan and we begin the process of product development.

It’s important for us to keep our customers close to the development process to make sure we don’t lose sight of the original intention of the product or miss an important feature during development that was desired, so once an idea is approved, we reach out to the customers that submitted the idea and determine their interest level in helping CorkSport test the product and discuss getting involved in the development process by providing additional ideas or expressing concerns about the design.

We stay connected with the customer advocate and make sure things are progressing how they feel is best for the product. Once we have a prototype we will find customers who want to help with the testing and validation process to determine if anything needs to be adjusted prior to proceeding to production.

We also make sure to share our new products with the Mazda community through forum interaction. This gives us exposure to a larger audience of customers who may be interested in the product, and because forums can sometimes be brutally honest it really helps us see what may be lacking or needing change.

A good example of this would be our newly redesigned mud flaps for the Mazdaspeed6. We had originally released these using the same mud flaps that we developed for the Mazdaspeed3 but some customers felt they were too hard to install. We then went back and completely redesigned the front mud flaps specifically for the Mazdaspeed6.

I posted pictures of our prototypes on the Mazdaspeed Forum and Mazda6 Club to see if anything needed to be changed before we got ready to release them. During the discussion thread, some comments were made on the length of the front mud flaps and fitment issues that may occur depending in your ride height, so we incorporated a template into the installation instructions that allows customers to trim the mud flaps to their desired length.

Customer collaboration does not end once the part is released either. We like to follow up with customers who purchased our new product releases and get their feedback and have an active knowledgebase that customers can go to for questions and can contribute to with comments and feedback.

It is important for us to make sure that customers are happy with the product and that the installation instructions are clear, concise and easy to follow. If a step is identified that requires additional clarification or could use additional product pictures, we incorporate that feedback into the new version of the instruction sets that go out. This collaboration helps us improve our products and makes us aware of things that may need to be addressed on other projects.

We welcome questions and comments from our customers at any time. If are installing a CorkSport product and have any questions we encourage you to contact us so we can help and if you ever have any suggestions on ways we can improve any of our products please let us know. It is important to us to remain close to the Mazda enthusiasts that have made our company the success it is today.

Andrew-

Posted on

CorkSport Product Release – MazdaSpeed 6 Mud Flaps!

Adding to the success of our Mazdaspeed 3 and Mazda 3 Mud Flaps, CorkSport would like to announce an extension of the CorkSport Mazdaspeed Styling product line with the launch of the all new CorkSport Mazdaspeed 6 urethane mud flaps.

Designed specifically for the Mazdaspeed 6, the CorkSport Mud Flaps offer superior protection against the elements, road debris and high impact rocks that are kicked-up by your tires while also providing your vehicle a streamlined sport look.

The popular CorkSport Mud Flap line is constructed from 80A durometer 1/8” thick urethane and includes a CorkSport logo laser-etched directly into the mud-flap that will never fade or wear off in even the most extreme elements. The adjustable design allows customers to install the rears to match the height of the vehicle and includes a template giving you the option to trim them to your liking.

Unlike rally style mud flaps, these mud flaps are a sleek 10” at the widest point on the backs and 8 ½” on the fronts providing your vehicle the optimum level of protection while maintaining a sport style design.

Demonstrating CorkSport’s mission to offer unparalleled service to the Mazda enthusiasts and support every make and model of the Mazda line, this is yet another product offering CorkSport has designed with the Mazdaspeed 6 in mind. The CorkSport Mud Flaps represent just one of the many products that are set to release in the coming months to support the Mazdaspeed 6.

The CorkSport Mazdaspeed 6 Mud Flaps will be offered competitively at $119.00 and include full color installation instructions, all of the needed installation hardware, and a template for customized trimming of the rear’s to accommodate the ride height of each individual vehicle.

For more information about these products, please visit CorkSport’s online catalog at https://www.corksport.com/corksport-mazda-mud-flap-set-mazdaspeed-6.html

Posted on

Compete and Win!

The Oregon Region SCCA Solo Director stopped by CorkSport this week and during our discussion, he brought up the topic of the national event and contingency awards that he and the other driver for his car had won. I missed the national tour event this year from other obligations, but it got me thinking, “what if I had competed and won my class.”

So I hopped on the computer and took a look at the SCCA national webpage to see what contingencies are offered to the winners of the National Solo tour.

#1 Mazdaspeed. Mazda pays out $200 for first and $100 for second for any Mazda who is registered with their program.

#2 Kumho. I am currently running #2 Kumho EXS tires on the CorkSport Mazda 2 and Kuhmo pays out big time if you win especially in the street tire classes. First place pays out $600 in product credit, second place is $400 in product credit and third place is $300. The tire size I use is 205/50/15 which goes for around $90 a tire. Even third place would almost pay for a set of new tires.

If you wanted to give it a shot in the Pro-Solo event (the Pro Solo event was the weekend after the national solo tour) there is even more available if you can get a class win.

#1 Mazdaspeed. Mazda pays out $200 for first and $100 for second for any Mazda who is registered with their program for a class win. If you go on the challenge they bump it up to $400 for a win and $200 for second place.

#2 Kumho. Kumho pays out the same for the street tire classes as the national solo win. For the challenge first place pays out $300 in product credit, second place is $200 in product credit and third place is $150.

#3 Hawk Performance. Hawk gives out $100 per class win and $100 for the challenge win.

So hypothetically if I could pull off a class win for two weekends of racing it would add up to a total of $2500 in products. Not too shabby for having a great time driving around cones. I am fortunate that the events are only 2 hours away for me. Some of the competitors I saw in the entry list came from as far as Texas.

Remember, even if you think you might try to attend a national event, make sure you register with the contingency sponsor before the event. Some require registering at the beginning of the year so read the fine print.

-Derrick