Search results - Search Results

MazdaEdit - Lite

$174.99

Quick view

Complete turnkey turbo kit for your 2014-2018 Mazda 3

Turbo, manifold, and downpipe fit nicely behind the engine and connect to any stock location performance exhaust

Cast stainless steel is used for its strength and durability

A pre-tapped oil pan for the turbo oil drain is included

Performance t-bolt clamps are used for all boosting connections

Proven Mazdaspeed BPV is included with the kit

A 73mm billet aluminum MAF hosing is used for precise operation.

4-ply reinforce silicone couplers are used to keep the boost in your Mazda 3's engine

Thick walled aluminum piping is used for the charge air plumbing

Included AGM battery and SS mounting plate and ECU relocation.

A clean and simple engine bay with the turbo kit installed

Street test mule with thousands of miles driven.

Track tested across America in the TC America Racing Series Hosted by SRO

Save $500.00

2014-2018 Mazda 3 2.5L Manual Turbo Kit

$5,999.99 $5,499.99

Quick view

Save $65.72

2014-2018 Mazda 3 2.5 & 2013-2017 Mazda 6...

$1,160.71 $1,094.99

Quick view

Complete performance clutch kit for you boosted Mazda 3 3rd Gen

Performance organic facing clutch kit for Mazda 6

Engineered to perform under the harshest conditions

Complete kit includes new pressure plate, organic disc, steel single mass flywheel and hardware

Save $65.72

2014-2018 Mazda 3 2.5 & 2013-2017 Mazda 6...

$1,160.71 $1,094.99

Quick view

Braiding reinforced hose included for you Mazda 6 and Mazda 3 application.

Custom installation setups are easy with the multi-position bracket design.

All necessary hardware is included for you Mazda 3 OCC installation.

The driver front fender is used for quick draining and close proximity to the PCV valve and intake manifold on your 2014+ Mazda3/6

Easy to use drain kit included with every OCC kit.

2014-2018 Mazda 3 & 2013-2017 Mazda 6 TUR...

$239.99

Quick view

Lower your intake air temps with the quick installation of the 3 Turbo SRI Heat Shield.

Utilizes the factory air ducting to feed the air filter with cool outside air.

The CS Heat Shield is laser cut and precision formed to ensure great fitment.

Powder coated wrinkle black to provide a durable and great looking finish.

Help the intercooler lower intake temps even more with the CS Heat Shield.

CAD designed to fit snug in the engine bay without permanent modifications needed.

Save $10.00

2021+ Mazda 3 & CX30 Turbo 2.5L - SRI Hea...

$149.99 $139.99

Quick view

The two piece design allows for an easy, OEM like installation

The CorkSport Skid Tray retains a similar air duct to the OEM splash shield to provide cooling to the front differential for cars with AWD.

Provide more protection to the underside of your engine so you have peace of mind whether you like to go off road or are lowered.

The CS skid plate features a quick access cover for the oil filter and drain so that oil changes are quick and easy.

Skidplate for 2019+ Mazda 3 & CX30

$269.99

Quick view

Improve the front end appearance of your Mazda by replacing the factory license plate bracket.

Relocate the license plate with ease using the included tow hook screw and license plate bracket.

In as little as 15 minutes you can improve the look of your CX-30.

Maintain proper functionality of parking sensors with the CS License Plate Relocation Kit.

Save $10.00

2020+ Mazda CX-30 License Plate Bracket R...

$99.99 $89.99

Quick view

Change the factory license plate location to improve the front end appearance of your Mazda3 and Cx-30

Enhance the look of your Mazda 3 in as little as 15 minutes.

The CS License Plate Relocation Kit works with parking sensors to maintain proper functionality.

Save $10.00

2019+ Mazda 3 License Plate Bracket Reloc...

$99.99 $89.99

Quick view

Easy to install the LED reflectors for the 2010-2013 Mazda 3 and Mazdaspeed 3 are available in factory looking red and a smoked lense.

Easy to follow installation instructions make the addition of the rear bumper LEDS easy on your 2nd Gen Mazda 2

Available in either OEM red or smoked which gives you options for personalizing your Mazdaspeed 3

10-13 Mazdaspeed 3/Mazda 3 LED Rear Bumpe...

$59.99

Quick view

Lower your MS3 for a better look and better handling with the CorkSport Lowering Springs.

A ~1.1” drop in the front and ~1.2” drop in the rear gives your Speed a great new look.

3.5K front springs and 4.5K rear springs improve handling and reduce understeer.

Natural frequency analysis ensures a comfortable ride, even with the stiffer spring rates.

Blue powdercoated finish for corrosion resistance and a great look.

Mazdaspeed 3 Lowering Spring Set

$279.99

Quick view

Increase visibility when backing up with the CorkSport T20 LEDs.

The LEDs are rated at 6500K for a cool white appearance.

Replace the old factory incandescent light bulb with the CS T20 LEDs to give your MS3 a modern look.

Install is a breeze and can be done in as little as 5 minutes

Save $5.00

2007 - 2013 Mazdaspeed 3/Mazda 3 LED Reve...

$49.99 $44.99

Quick view

Let your turbo breathe better with the CorkSport downpipe for the Mazda 6 Turbo.

80mm mandrel bent piping provided smooth flow to support 500+whp.

2-piece design offers an easy install that fits just like OEM.

Cast 304 stainless steel bellmouth offers a smooth transition from turbo to piping.

Gain bonus power potential, with room to grow with tuning.

Option to choose catless or a high flow cat to suit your build & preferences.

Mazda 6 Turbo Downpipe

$499.99

Quick view

Racing inspired swan neck style brackets

Give your speed3 the aggressive look it needs to stand out!

No tape required with stainless brackets and aluminum flap construction

Satin black finish blends with every style build

Seven hard-mounting points ensure no flex or movement

all metal construction holds up to the elements

Save $20.00

2010 - 2013 Mazdaspeed 3 Gurney Flap Wing...

$219.99 $199.99

Quick view

Replace your Speed 3 full exhaust system with the CorkSport 3.5” Turbo Back Exhaust.

A cast stainless steel bellmouth ensures a smooth transition out of your Mazdaspeed3 turbo.

3.5 inch OD mandrel bent piping provides a great sound and efficient flow for 850+WHP.

Custom v-band flanges & clamps offer leak free and high flowing connections.

Straight through resonators cut out drone without impacting horsepower potential.

Supplied polyurethane exhaust hangers keep the CS 3.5” TBE in position.

A polished 4.4” (112mm) diameter exhaust tip fills the bumper cutout for a clean look.

Save $120.00

2007-2009 Mazdaspeed 3 - 3.5" Turbo Back ...

$1,199.98 $1,079.98

Quick view

Replace your Mazdaspeed 3 full exhaust system with the CorkSport 3.5” Turbo Back Exhaust.

A cast stainless steel bellmouth ensures a smooth transition out of your turbo.

304 SS cast bellmouth is durable and easy to install with the modular v-band connection.

Polished 4.4” (112mm) diameter exhaust tips fill the bumper cutouts for a clean look.

Huge 4.4inch (112mm) tips fill the bumper cutouts.

Save $120.00

2010-2013 Mazdaspeed 3 - Turbo-Back 3.5" ...

$1,399.98 $1,279.98

Quick view

Let your turbo breathe freely with the CorkSport 3.5” Downpipe connect right to your current 3” CBE.

Option for a catted setup utilizing a 300cel density metallic foil CAT for the Speed3.

A cast 304 stainless steel bellmouth provides a smooth and high flowing transition from your turbo to your Mazdaspeed downpipe.

Mandrel bent & TIG welded 304 stainless piping offers smooth flow and long lasting durability.

Gain quicker spool times and bonus power potential with the large pipe diameter.

CST turbos with the EWG on the turbocharger will need a new dumptube designed to fit the 3.5” downpipe.

Mazdaspeed 3 3.5" to 3.0" Downpipe Only -...

$499.99

Quick view

Dumptube specific for CST Turbos and 3.5" exhaust

Custom fabbed dumptube for the Tial 44mm EWG

With a 3.5" exhaust this is the dumptube you need

Dumptube need for 3.5" downpipe and CST EWG Turbine Setup

The external wastegate housing is available seperately.

Dumptube for 3.5 Inch Exhaust with EWG Tu...

$69.99

Quick view

Dress up your Mazda 3engine bay with the CorkSport Carbon Fiber Engine Cover.

Anodized billet CS badge available in four colors to match your Mazda build.

Both the woven carbon and forged carbon offer a great look for your Skyactiv engine

Designed for SkyActiv 2.0L and 2.5L engines from 2014-2018

OEM engine cover replicated for direct fitment.

OEM style mounts ensure great fitment and a secure cover.

Save $30.00

2019+ Mazda 3 Carbon Fiber Engine Cover W...

$329.99 $299.99

Quick view

Supply your big turbo Speed6 with plenty of air with a 4 Inch Intake.

Mandrel bent aluminum pipe & custom silicone ensures smooth airflow.

Designed for the CorkSport FMIC piping and core kit

Fitment for stock size, 3.5 inch, and 4 inch turbos

Complete 4 inch intake system for the mazdaspeed 6

4 inch Intake System for the 2006-2007 Ma...

$389.99

Quick view

New OEM components complete corksport VVT timing k

Mazda revised VVT actuator is stronger and more durable

A solid machined piece of 1/4” 304 Stainless Steel will make sure your cams are accurately synced.

Save $30.00

Mazdaspeed VVT and Timing Tool Combo

$529.98 $499.98

Quick view

Performance Mazdaspeed camshafts for the street and strip

Save $110.00

Mazdaspeed VVT Kit and Camshafts Combo

$1,059.98 $949.98

Quick view

Save $140.00

Mazdaspeed VVT Camshafts and Timing Tool ...

$1,129.97 $989.97

Quick view

Mazda 3 ECU Tuning Solution, VersaTuner

$549.99

Quick view

Improved drop front and rear (1.75in, 2.00in)

What your Mazda6 needs to stand out from the crowd

Stiffer rear springs reduce understeer and body roll at the limit

Save $20.00

2018-2021 Mazda 6 Turbo 2.5L - Sport Lowe...

$279.99 $259.99

Quick view

Purposefully designed to make more power for the Mazda 3 2.5L SkyActiv Turbo

The best performing and sounding intake system for the 2021 Mazda 3 Turbo

Without tuning see a 9-13whp improvement.

Assured no air leaks or CELs with the precision machined billet aluminum MAF housing.

T-Bolt clamps can be selected in either polished or black zinc coat finishes.

The all black kit is sleek in the Mazda 3 engine bay

Clean and simple install for power and turbo noises

If you want sound, then the CorkSport intake is the right choice for you

2021+ Mazda 3 & CX-30 Turbo - Short Ram I...

$229.99

Quick view

Customize your Mazdaspeed DISI engine with the anodized valve cover hardware with a new Gen 2 MS3 valve cover.

The best Mazdaspeed valve cover hardware kit on the market

Mazdaspeed valve cover hardware kit red with raw stainless bolts

Mazdaspeed valve cover hardware kit red with black stainless bolts

Mazdaspeed valve cover hardware kit purple with raw stainless bolt

Mazdaspeed valve cover hardware kit purple with black stainless bolts

Mazdaspeed valve cover hardware kit raw aluminum with raw stainless bolts

Mazdaspeed valve cover hardware kit raw aluminum with black stainless bolts

Mazdaspeed valve cover hardware kit gold with raw stainless bolts

Mazdaspeed valve cover hardware kit gold with black stainless bolts

Mazdaspeed valve cover hardware kit blue with raw stainless bolts

Mazdaspeed valve cover hardware kit black with raw stainless bolts

Mazdaspeed valve cover hardware kit black with black stainless bolts

OEM fitment with your choice of custom color

Choose between raw stainless bolts or black stainless bolt

OEM gasket retention for easy install a leak free use

Save $60.00

GEN2 Valve Cover & Valve Cover Hardware D...

$484.98 $424.98

Quick view

Time your 2.3L Mazdaspeed DISI engine with confidence.

Precision machined cam alignment pockets secure the camshafts on the Mazdaspeed engine

Two TDC pins are provide incase one is lost or broken. Bright red so you don’t forget it in your speed engine bay.

DISI MZR Timing Tool Kit for Mazdaspeed

$69.99

Quick view

Save $70.00

DISI MZR Timing Tool Kit and Camshafts Combo

$669.98 $599.98

Quick view

CNC machined from 6061-T6 aluminum to fit your Mazdaspeed

Removes a couple pounds to lighten your Mazdaspeed 3

Subtle and simple Mazdaspeed 3 appearance upgrade

2007-2009 Mazdaspeed 3 Rear Wiper Delete

$39.99

Quick view

The Mazdaspeed 3 carbon hood scoops uses the forged type of fiber material to give a unique look.

Allows increased airflow into the TMIC location for the Speed 3

Hand crafted forged carbon ensures your speed 3 has a unique product.

Increase the airflow into your speed 3 engine bay with the larger hood scoop opening.

This is a great upgrade for the Mazdaspeed 3 looks and function

2010-2013 Mazdaspeed 3 Hood Scoop - Forge...

$329.99

Quick view

Drastically upgrade your stopping capabilities with the Mazda 3 Big Brake Kit

4-piston forged calipers ensure consistent performance on the street & track.

Two-piece 13”stotted rotors provide added stopping power to your Mazda 3 turbo.

Just add brake fluid for a big upgrade in brake performance and feel.

Offered in four powdercoated colors for a great looking & long lasting finish.

Spice up the look of your 4th GEN with some big brakes behind your wheels

Included stainless steel brake lines for a consistent and great feeling brake pedal.

Save $100.00

Big Brake Kit for 2019+ Mazda 3 Turbo, No...

$1,599.99 $1,499.99

Quick view

The mazdaspeed coolant temperature sensor housing is a great addition to the Corksport coolant temperature gauge.

Clean appearance with an anodized black finish

Coolant gauge installation is straightforward with all needed components included.

Mazda 32mm Coolant Temperature Adapter Port

$39.99

Quick view

The Mazda 3 specific fit CorkSport BBK offers a substantial increase in braking performance.

Improve braking capabilities of the Mazda 3 with the slotted two-piece 13” rotors.

Elevate your Mada and and Mazda 6 caliper look and performance with the forged 4-piston CS calipers.

The billet caliper bracket holds the 4-piston calipers stable under hard braking conditions.

The included street performance brake pads provide additional stopping power of your Mazda during spirited driving.

Replace the flexible factory brake lines with the included braided stainless steel lines to firm up the brake pedal feel under hard braking.

Multiple powder coat color options are available for the calipers to achieve the look you want.

Save $100.00

2014-2018 Mazda 3 and 2014-2021 Mazda 6 B...

$1,599.99 $1,499.99

Quick view

Lower your Mazda 3 Turbo for better handling and a great new look.

Powdercoated springs for long lasting corrosion protection.

Stiffer than stock spring rates were carefully chosen to reduce understeer.

Reduce body roll and corner faster with a relatively simple & short install.

• Still comfortable for the daily commute.

Save $20.00

2021+ Mazda 3 Turbo Lowering Springs - Ha...

$279.99 $259.99

Quick view

Mazda Performance Leader since 1998, now in keychain form!

Save $1.40

CorkSport Key Chain

$6.99 $5.59

Quick view

Keep your hand warm and your drink cold at any Mazda meets

Works with 12 ounce and up cans and most drink bottles

Save $0.60

CorkSport Can Koozie

$2.99 $2.39

Quick view

Approximately 52% stiffer in the front and 77% stiffer in the rear gives great handling without sacrificing ride quality.

Extra stiffness in the rear reduces understeer and body roll.
Mazda-3-lowering-kit

Natural frequency analysis of the suspension ensures a comfortable, yet sporty ride.

Wake up your new Mazda's handling with the CorkSport Performance Lowering Springs

2014-2018 Mazda 3 Lowering Spring Set

$279.99

Quick view

Better than OEM durability with the upgraded Speed3 injector seals

The upgraded injector seal compared to the stock seal

Save $140.00

Mazdaspeed 3/6 Fuel Injector Seals and In...

$1,265.59 $1,125.59

Quick view

Add some much needed sound to your 4th GEN Mazda 3.

Larger piping helps your Mazda 3 breathe better

Performance pass through resonator provides flow and great sound.

63.5mm diameter mandrel bent piping ensures smooth flow for great performance.

Different midpipes for AWD and FWD vehicles ensure great fitment no matter your trim level.

Included hardware and gaskets ensure an easy install and long lasting quality.

Model specific & adjustable exhaust tips ensure a fantastic & personalizable look.

Whatever you make and model, CorkSport has the option for you.
2020-mazda-3-exhaust-kit-for-aero

tand out at the next car show with the CorkSport Performance Cat Back Exhaust

2019+ Mazda 3 2.5L/2.0LCat Back Exhaust S...

$849.99

Quick view

2019+ Mazda 3 2.5L/2.0L Exhaust Mid Pipe ...

$349.99

Quick view

Save $5.00

CorkSport Mazda Performance Hat

$24.99 $19.99

Quick view

This complete COBB access port, HPFP internals and pump rebuild kit for the Mazdaspeed 3 and Mazdaspeed6

The COBB AP includes everything shown here, two faces, cables and a case.

The only fuel pump kit with the upgraded spring

Speed3 and Speed6 complete high pressure fuel pump seal and filter kit

Save $79.99

MAZDASPEED COBB Access Port / CorkSport F...

$1,059.98 $979.99

Quick view

Simple and proven, this controller will control up to 4 extra injectors for port injection kits

Included is the completed wiring harness, wiring connections, R4 Software and uses EV6 style injector connections

Split Second Injector Controller AIC1-V4H...

$329.99

Quick view

Injector Dynamics port injectors for up to 750whp

Port Injector size 34mm tall with 14mm O-rings

Injector Dynamics 1050x Port Injectors

$537.60

Quick view

The CorkSport Port Injection Fuel Kit provides just about everything you need to setup port injection on your Mazdaspeed 3.

Each kit includes the CorkSport Aux Fuel Tank for 2.6 gallons of capacity for your fuel of choice

Supply your own PI-ready manifold, fuel rail, injector controller, and wiring and you’re ready to install the CS aux fuel kit!

Return style fuel system increases fuel pressure with boost pressure to maintain a consistent fuel supply.

Stainless steel 0.125” thick brackets hold the tank in place.

E85 safe braided stainless steel lines ensure no fuel smell and offer a clean look.

Save $30.00

Mazdaspeed 3 8th Port Auxiliary Fuel Kit

$1,299.99 $1,269.99

Quick view

The CorkSport Mazdaspeed 3 Auxiliary Fuel Tank is the perfect first step to aux fuel on your MS3

Included level sensor and LED warns when aux fuel is getting low.

0.19” thick rotomolded HDPE offers good strength while staying safe with just about any fuel.

2.6 gallons of auxiliary fuel fits snugly in front of your driver’s side front tire.

Included pump mounting locations to help make the rest of your fuel system setup easier.

Maximized capacity keeps you making power longer.

Save $30.00

Mazdaspeed 3 Fender Mounted Auxiliary Fue...

$339.99 $309.99

Quick view

Refresh your OEM HPFP with the CorkSport HPFP Rebuild Kit

See what's included in the exploded view

Months of material testing ensures correct functionality for both gasoline and E85 mixes.

Custom manufactured X-ring exactly matches OEM specifications for correct sealing.

Included hardware replaces the annoying Torx screws. We even include a security Torx bit for easy OEM screw removal!

Save $15.00

Mazdaspeed E85 Fuel Pump O-Ring Kit and N...

$89.98 $74.98

Quick view

Everything needed to upgrade the Speed3/Speed6 HPFP with the internals and the seal/filter kit

High Performance Fuel Pump Internals, HPFP Upgrade

CorkSport HPFP Internals Packaging Closeup

Save $39.99

Mazdaspeed High Pressure Fuel Pump Intern...

$409.98 $369.99

Quick view

CNC machined from 6061-T6 aluminum to fit your Mazda 3

Removes a couple pounds to lighten your Mazda 3

A simple modification to increase the appearance of your Mazda 3

Available for your 2014+ Mazda 3 hatchback

2014-2018 Mazda 3 Rear Wiper Delete

$39.99

Quick view

Removes a couple pounds to lighten your 4th Gen Mazda 3

Complete Rear Wiper Delete Kit for a sleek look

2019+ Mazda 3 Rear Wiper Delete

$39.99

Quick view

Save $4.00

CorkSport Performance Shirt

$19.99 $15.99

Quick view

Fleece lined hoodie which is comfortable and warm until your significant other steals it...

The best in Mazda performance also gives you the best in styling

Save $12.00

Mazda Performance Grid Hoodie

$59.99 $47.99

Quick view

Choose from full leather or optional Alcantara inserts

All OEM buttons and trim fit perfectly in the CorkSport Steering Wheel.

High quality genuine Alcantara and leather gives the CS steering wheel a great feel.

Thicker wheel grip and pronounced thumb grooves give you the upmost in control.

Classic style red stitching adds a touch of sportiness to the wheel and your interior.

Save $20.00

2017-18 Mazda 3, 2017+ CX-5, 2018+ CX-3 L...

$399.99 $379.99

Quick view

Give your Mazdaspeed 6 and Mazda 6 a wider range of adjustability with the rear camber arms

Spherical bearings are used instead of rubber or polyurethane for their superior strength.

We're critical of the products we produce for the Speed 6. The CorkSport rear camber arms are no exception.

Our camber arms offer 4.5 degrees of adjustability so you can fine tune your driving experience.

Mazdaspeed 6/Mazda 6 Adjustable Rear Camb...

$199.99

Quick view

Mazdaspeed6 Adjustable Front Upper Control Arms offer camber adjustment with long lasting strength.

Replace your entire front upper control arm for added adjustability and suspension rigidity.

Spherical bushings replace the OEM rubber bushings for better handling feel.

Dial in your front camber to maximize grip, correct for your lower ride height, or fit those new wheels.

Save $10.00

2006-2007 Mazdaspeed 6 & 2003-2008 Mazda ...

$329.99 $319.99

Quick view

Improve power and sound in as little as 30 minutes.

Laser cut and formed bracket supports the CS SRI in the engine bay

Purchase heat shield for better thermal protection

All black silicone option for the 2.5T engine

Option red silicone and filter to let you personalize your Skyactiv Turbo Engine Bay

Skyactiv Turbo optional blue silicone and filter intake color

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9, 20...

$229.99

Quick view

Save $10.00

Mazdaspeed E85 Safe HPFP O-Ring Rebuild Kit

$59.99 $49.99

Quick view

Save $30.00

2014-2018 Mazda 3 Carbon Fiber Engine Cover

$329.99 $299.99

Quick view

Get great sealing for your upgraded or OEM Speed 3 throttle body with the CS Throttle Body Gasket

Design for OEM and CorkSport 72mm throttle body

An enlarged center opening for no flow restriction with the upgraded CorkSport Throttle Body.

Pair with the CS Intake Manifold Gasket for the best sealing.

Mazdaspeed Throttle Body Gasket

$19.99

Quick view

Set of four spark plugs pre-gapped to 0.026inches

NGK part # LTR7IX-11 1-step colder spark plugs

pre-gapped to 0.026” for stock to 450whp build

Save $10.00

Mazdaspeed NGK 1-Step Colder Spark Plugs ...

$39.99 $29.99

Quick view

Block off an unneeded EWG port with the CorkSport EWG Cap

Designed to fit a Tial MV-R 44mm wastegate flange

Save $5.00

44mm EWG Block Off Plate & Clamp Kit

$39.99 $34.99

Quick view

Supply your big turbo MS3 with plenty of air with the CorkSport 4 Inch Intake.

Billet MAF housing with air straighteners ensures accurate airflow readings.

Wrinkle black powdercoat looks good in any engine bay

Easy installation using the OEM mounting points and OEM ports for PCV, BPV, and boost vent.

2007-2013 Mazdaspeed 3 4 inch Intake System

$389.99

Quick view

Laser cut 11 gauge aluminum adds some much needed protection without adding unnecessary weight.

Add some protection to the underside of your CX-5 with the CorkSport Aluminum Skid Tray.

A direct replacement for the flimsy plastic OEM CX5 skid tray

The two piece design offers easy installation and added adjustability.

Easily change your Cx5s oil with the removable oil cover

Skidplate for 2017+ Mazda CX-5

$269.99

Quick view

Speed up your EWG Mazdaspeed 3 exhaust manifold installation

Save time on your installation, fits with tial 44mm WG

Used in our half mile racing Mazdaspeed 3

Works with any configuration of turbo installed with the CorkSport Cast Mazdaspeed manifold

Dumptube Kit for Exhaust Manifold

$129.99

Quick view

Designed specifically for the 2019+ Mazda 3, in any configuration.

Larger dual wall tips complement the body lines of the Mazda 3

The CorkSport axle-back exhaust system looks great and sounds even better.

63.5mm (2.5inch) piping and a flow through resonator helps your engine breathe better.

90mm dual wall tips fill out the bumper cutouts and have length adjustment so you can personalize your look.

2019+ Mazda 3 & CX-30 Axle Back Exhaust -...

$549.99

Quick view

Add chassis rigidity and improve driver feedback in as little as 15
minutes.

Polished aluminum bar and black powdercoated steel brackets for a simple & stylish look.

Hardware and step-by-step instructions included for an easy install

Retain easy access to the brake reservoir and battery cables.

Designed for the best balance of strength and weight

2019+ Mazda 3 - Front Strut Tower Bar

$179.99

Quick view

Get great performance on the street and track with the Mazda 3 CorkSport Coilovers.

Approximately 2 inches of height adjustability to get the look you
want

Dial in your ride and handling with 15-way adjustable damping.

Provided hardware for Mazda 3 and Mazda 6 fitment

Spring rates of 7K front, 8K rear offer great handling without being too stiff on the street.

Adjustable front camber plates included to dial in wheel fitment & handling.

Completely change how your Mazda looks and handles with an easy install that can be done in an afternoon.

best wheel size for the 3 rd GEN Mazda 3 is the 18x9.5 +40

Fitting 255/40 tires with aggressive camber

Save $100.00

2014-2018 Mazda 3 & 2013-2017 & 2018+ Maz...

$1,599.99 $1,499.99

Quick view

Help your GEN4 Mazda 3 breathe with a CorkSport SRI.

Performance AEM dry-flow filter to improve flow and retain reliability.

Billet aluminum MAF housing to ensure no CELs.

Stainless steel t-bolt clamps provide a secure and great looking clamping system.

Improve horsepower, torque, and sound in as little as 30 minutes for your Mazda 3.

Stainless steel T-bolt clamps for a leak free install and a great look.

Your choice of silicone, filter, and clamp color to personalize your engine bay.

**New Filter Element Type is now included with the intake **

2019+ Mazda 3 2.0 - Short Ram Intake System

$199.99

Quick view

A functional drop of 2.1 inches lower in the front and rear.

Ride height has a slight forward rake with a driver in the vehicle

With more weight in the rear the CX-5 ride height will flatten out

2017+ Mazda CX-5 Lowering Springs - FWD &...

$279.99

Quick view

The first modular cast exhaust manifold for the Mazdaspeed platform

Shallow angle exhaust manifold for high power and great sound

Front and center EWG placement for all the Mazdaspeed engine bay bling

Included firewall heat shield for an easy and safe installation

Optional dumptube makes install and simple weekend project, no fabrication needed

Stainless steel loves to turn a gold then blue color with heat from your Mazda

Modular turbo flange options allow you to choose stock flange, T3 or Precision V-Band

Cast from 304SS with 5mm thick wall tubing

With the Mazdaspeed manifold and the CorkSport CST4 turbo we gained 25 peak HP over the stock manifold.

You can have an extra 25 wheel horsepower in your Mazdaspeed 3 with our turbo manifold over the XS power and other variants of the same exhaust manifold.

Mazdaspeed Exhaust Manifold

$899.99

Quick view

2019+ Mazda 3 - CX-30 - Short Ram Intake ...

$199.99

Quick view

Improve handling and appearance of your 2019-2020-2021 Mazda 3.

Custom stiffer spring rates ensure great handling without ruining
your ride.

We stiffened the rear springs more than the front for reduced
understeer.

The CorkSport lowering springs are about as low as you can go
without needing coilovers.

Rear spring silencers ensure a quiet ride.

Blue powder coating for corrosion resistance and a great look.

Save $20.00

2019+ Mazda 3 Lowering Springs - Hatchbac...

$279.99 $259.99

Quick view

Reduce the stress of hot days on your turbo system.

Laser cut and precision formed steel ensures a great fit.

Retain the OEM air ducting to better feed outside air to your filter.

Wrinkle black powdercoating for a clean look

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9, 20...

$149.99

Quick view

Eliminate the heatsoak of a TMIC with the CorkSport Speed6 FMIC kit

A 21”x10”x3” intercooler ensures your Speed6 boost temps stay cool.

2.25” hot side piping and 2.5” to 3” cold side piping offers the best balance of spool time and high horsepower capabilities

Custom wire-reinforced silicone ensures minimal expansion under boost.

The CS FMIC kit comes with everything you need to install on your MS6.

Stainless T-bolt clamps are included to minimize the chance for boost leaks.

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

Quick view

The CorkSport Aluminum Coolant Reservoir is a direct OEM replacement.

Aluminum construction gives the CS coolant res optimum functionality and reliability.

An internal baffling system ensures no air bubbles enter the cooling system under hard driving.

Sight tube for easy coolant level monitoring. e. Mazdaspeed-Aluminum-Coolant-Tank

Black textured powdercoat finish for a great looks and durability. f. Coolant-Reservoir-Mazda-3

Replace the ugly yellow plastic OEM tank with the CorkSport Coolant Tank.

Coolant Tank for 2010-2013 Mazdaspeed 3 /...

$239.99

Quick view

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

Quick view

Get great sealing for your upgraded intake manifold with the CS Single Runner gasket

Large single ports eliminate the divider in the OEM gasket while also allowing for enlarged ports on the engine and intake manifold

Aluminum Foamette Material offers superior sealing characteristics and reusability

Lower IM mount spacer included to prevent warpage to intake manifold or cylinder head

Pair with your Mazdaspeed port injection system

Mazdaspeed Intake Manifold Gasket

$39.99

Quick view

Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo for your Mazdaspeed

Internal wastegate setup makes install straightforward and simple.

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing

400whp+ Mazdaspeed 6 and all the power on under the curve

The easiest Mazdaspeed 3 400whp option today with functional IWG setup.

Included with all IWG turbos, a ceramic coated heatshield.

Mazdaspeed 3/6 CST4 Turbocharger

$1,199.99

Quick view

Tial is the best EWG option for the Mazdaspeed 3 and 6 and the CorkSport go to for our cast exhaust manifold.

304 stainless steel cosntruction ensures a long life of use on your Mazdaspeed.

The tial MVR EWG includes everything shown above, fitting, clamps and more to make installation a breeze with your Mazdaspeed turbo

Each Tial 44mm Wastegate includes an assortment of springs to allow you to tailor the EWG for your Speed

The compact design allows for extra clearance and easy installation in the Mazdaspeed platform.

Save $11.00

Tial Mazdaspeed 3 and Mazdaspeed 6 MV-R W...

$435.99 $424.99

Quick view

X Clutch offers a performance clutch upgrade for the Mazdaspeed 6, Mazdaspeed 3, MPS 6 and MPS 3.

The X Clutch kit includes all of the needed installation parts and alignment tool for your Speed3 and Speed 6.

The complete high horsepower twin disc clutch for the Mazdaspeed DISI platform

Save $160.72

XClutch Mazdaspeed 3 and Mazdaspeed 6 Per...

$1,160.71 $999.99

Quick view

Open up your Mazda 6 Turbo with the CorkSport Axle Back Exhaust.

High flowing resonators remove drone and other unwanted noise without affecting the Skyactiv 2.5T performance.

Retain the OEM oxygen sensor for no CELs and no tuning required for your Mazda 6 Turbo.

Polished 80mm piping looks great and livens up your Mazda 6.

Description: Gain some power and much needed noise from your SkyActiv Turbo.

2018+ Mazda 6 2.5L & 2.5L Turbo Axle Back...

$599.99

Quick view

Designed specifically for the 2017+ Mazda CX5 with SkyActiv 2.5L turbocharged engine

This axle-back exhaust system looks just as good as it sounds b. Exhaust-Upgrade-Mazda-CX5

Using the OEM mounting points, the beautiful stainless steel 80mm piping, resonators and exhaust tips fit just as good as the stock exhaust system

Liven up your 2.5T CX-5 with some volume without compromising the daily driving comfort.

Full stainless steel, TIG welded construction ensures strength and good looks for your Mazda Cx5

2017+ Mazda Cx5 Axle Back Exhaust

$599.99

Quick view

The CorkSport Coilovers offer great performance for the street or track.

15-way adjustable damping ensures you get the ride you prefer

Easy to access damper adjusters mean no disassembly needed to tune your ride and handling.

7K front springs and 8.5K rear springs offer supreme handling characteristics without being too stiff for the street.

Up to three degrees of negative camber in the front to perfect handling and wheel fitment.

Approximately 2 inches of height adjustability to dial in your stance

Change how your Mazda feels with an easy install that does not require a spring compressor.

2004-2013 Mazdaspeed 3 & Mazda 3 Coilover...

$1,599.99

Quick view

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Mazdaspeed 4.5 Bar MAP Sensor

$99.99

Quick view

Let your CX-9’s turbo breath better with the CorkSport Axle back Exhaust.

High flow, pass through resonators eliminate drone while retaining good flow characteristics.

Stainless steel construction ensures an exhaust that will last a lifetime.

Exhaust tips were extended and increased in size to fill out the bumper cutouts and give a clean look.

Spice up your grocery-getter with the some added noise and a nice visual boost.

2016+ Mazda CX-9 Axle Back Exhaust

$599.99

Quick view

Search resultsProducts found: 314