360-260-2675

Vancouver, WA

HRS

M-TH 9A-11:30/12:30-5P | F-SU CLOSED

Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Home/Mazdaspeed 6/Mazdaspeed 6 Power/Intake

Intake

Mazdaspeed 3 & Mazda 4-inch dry flow air intake filter

Dry Flow Air Filter prodcut side view dark gray/black filter

4-inch filter replacement top view for CorkSport Intake Systems

4 inch sizing for dry flow air filter for CorkSport intakes

Dry Flow Air Filter 4.0-inch Filter Inlet...

$64.99

4.5 inch Mazdaspeed Dry Flow Air Filter for CorkSport 4-inch intake system

Black 4.5 Inch Mazdaspeed Dry Flow Air InIntake Filter for CorkSport Intake Systems

Intake filter bottom opening view for 4.5 inch air filter for CS Mazdaspeed Intake System

Top vide of dry flow air filter with CS CorkSport

Dry Flow Air Filter 4.5-inch Filter Inlet...

$69.99

Mazda Air Filter Sock for 3.0-4.5 Short Ram Intake Filters

CorkSport Mazda Air Filter Cover

Air Filter Cover for Mazda Intakes

Mazda Air Filter Sock Cover Installed

Short Ram Intake with Air Filter Cover Installed

Fitment for the Air Sock Water Repellent Cover

Protect Your SRI and Engine with a Sock Cover for Mazda Air Intake filters

Black SRI with Sock Filter Cover

Air Filter Cover - Water Repellant

$19.99

Mazdaspeed 3 & Mazdaspeed 6 Turbo Blanket. Spool faster with the simple installation of the CorkSport Turbo Blanket.

Reduce boost air temps by keeping the heat within the exhaust housing and away from the compressor and top mount intercooler.

The CS Turbo Blanket keeps surrounding components in your engine bay protected from excessive temperatures.

Made from volcanic lava rock and insulating calcium magnesium silicate wool, the CS Turbo Blanket is made for the most demanding conditions.

Installation is straightforward with the included stainless steel springs that hold the CS Turbo Blanket securely in place.

Designed to handle the heat keeping the heat in the turbo and away from heat sensitive components.

Designed specifically for your CorkSport turbo, choose between IWG and EWG fitment.

2006-2013 Mazdaspeed 3 & 6 PTP Turbo Blanket

$219.99

CorkSport Mazdaspeed Exhaust Manifold Blanket Increases turbo efficiency

Reduce boost air temps by keeping the heat within the exhaust manifold and away from the compressor and top mount intercooler.

Made from volcanic lava rock and insulating calcium magnesium silicate wool, the CS Exhaust Manifold Blanket is made for the most demanding conditions.

Installation is straightforward with the included stainless steel springs that hold the CS Exhaust Manifold Blanket securely in place.

The CS Exhaust Manifold Blanket keeps surrounding components in your engine bay protected from excessive temperatures.

2006-2013 Mazdaspeed 3 & 6 PTP Exhaust Ma...

$419.99

Supply your big turbo Speed6 with plenty of air with a 4 Inch Intake.

Mandrel bent aluminum pipe & custom silicone ensures smooth airflow.

Complete 4 inch intake system for the mazdaspeed 6

Designed for the CorkSport FMIC piping and core kit

Fitment for stock size, 3.5 inch, and 4 inch turbos

4 inch Intake System for the 2006-2007 Ma...

$389.99

CorkSport Mazdaspeed 6 Front Mount Intercooler Kit.

The CS FMIC kit comes with everything you need to install on your MS6.

2.25” hot side piping and 2.5” to 3” cold side piping offers the best balance of spool time and high horsepower capabilities for your Mazdaspeed 6

A 21”x10”x3” intercooler ensures your Speed6 boost temps stay cool.

Custom wire-reinforced silicone ensures minimal expansion under boost.

Stainless T-bolt clamps are included to minimize the chance for boost leaks.

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

The increased opening size has been maximized within the OE bolt pattern to optimize flow.

Image 1: Choose for FMIC Setups

Flat face throttle plate improves flow and retains all the strength of OE.

OE Fit and Finish helps the CS Throttle Blend In

The CorkSport Intake Manifold works great in tandem with the CS Throttle Body.

Flowbench Testing shows a 33% improvement in peak flow capacity

GT3582R Testing show improved spool and is to high range power increases

Performance Throttle Body for 2006-2013 D...

$329.99

Top view of the CorkSport Dual VTA BPV for Mazdaspeed 3, Mazdaspeed 6, and CX-7.

O-rings are used for all critical sealing interfaces.

The CorkSport VTA BPV is only 2.5” tall which compliments compact engine bays and custom intercooler piping.

VTA ports will then be utilized for medium to high boost and abrupt throttle lift-offs.

The CorkSport VTA BPV has been tested to 50psi.

Mazdaspeed Dual VTA Bypass Valve

$279.99

Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo for your Mazdaspeed

Included with all IWG turbos, a ceramic coated heatshield.

Internal wastegate setup makes install straightforward and simple.

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing

The easiest Mazdaspeed 3 400whp option today with functional IWG setup.

400whp+ Mazdaspeed 6 and all the power on under the curve

Mazdaspeed 3/6 CST4 Turbo Upgrade

$1,199.99

Dyno proven performance for your Mazdaspeed 6

Blue silicone and filter shown with the black powder coated turbo inlet pipe and polished clamps installed on a Mazdaspeed6

The must have Mazdaspeed 6 Cold Air Intake

Completely configurable to make the intake suit your Mazdaspeed

OEM fit and finish for your Speed6

We use a billet aluminum CNC machined MAF housing with all our Mazdaspeed performance intakes

**New Filter Element is now included with the intake **

2006-2007 Mazdaspeed 6 Stage II Power Ser...

$279.99

Increase the air flow of your system and hence the power of your Mazdaspeed3 when you upgrade to CorkSport??s Power Series 3.5? intake system.

CorkSport's MAF housing protects and connects your system.

Choose from three optimal colors to personalize your intake system: brilliant blue, classic black or revving red.

CorkSport's 2010-2013 Mazdaspeed 3 Power Series 3.5” Intake System includes a turbo inlet pipe, clamps, MAF housing, a water resistant air filter, colorful silicone reducers, and vents.

There's no way you won't notice an improvement in engine performance with the 3.5" intake system.

A close up view of the 3.5" intake system in the engine bay of a 2010-2013 Mazdaspeed 3.

3.5 inch Mazdaspeed 3 Power Series Intake...

$339.99

Mazdaspeed DISI Silicone Bypass Valve HOse

Installed Mazdaspeed DISI Silicone Bypass Valve Hose

Black, red, blue DISI silicone bypass valve hose

clamps for the Mazdaspeed DISI silicone byass valve hose

Mazdaspeed DISI Silicone Bypass Valve Hose

$39.99

Speed 3 Polished pipe with blue silicone and stock turbo fitment setup

A real 3 inch ID MAF for your Mazdaspeed

The Mazdaspeed 3 inch intake offers 3 silicone colors, two pipe finishes and two clamps colors.

Parts breakdown of the Speed3 3inch intake

**New Filter Element Type is now included with the intake **

Mazdaspeed 3, 3 inch Power Series Intake

$299.99

Mazdaspeed 3/6 MZR Bypass Valve BPV

Increase Turbo lifespan with the Mazdaspeed 3/6 bypass valve

Bypass valve fitment for Mazdaspeed

Bypass Valve product video backside

Valve size of the Mazdaspeed BPV

Mazdaspeed MZR Bypass Valve

$199.99

Get ready for the spool up sound in your Mazdaspeed6

We supply everything but the tools to install your Speed6 SRI

**New Filter Element is now included with the intake **

Short Ram Performance Air Intake for Mazd...

$199.99

The filter media is the K&N Hybrid type using the latest material.

The 3-inch short ram intake filter comes in red, blue, and blck

Out screen mesh helps ensure a long air filter life

Check bottom of your filter to confirm needed size

Dry Flow Air Filter 3.0-inch Filter Inlet...

$59.99

Black CorkSport Dry Flow Air Filter for 3.5-inch short ram intakes

Dry flow SRI filters shred dirt for long life

Check bottom of your filter to confirm needed size

Cone shaped Mazda short ram intake filter

SRI Mazda filters come in Red, Blue, and Black

Mazda Short ram intake filters

Dry Flow Air Filter 3.5-inch Filter Inlet...

$59.99