Save $10 On Orders Over $100. Use Code: CORKSPORT10
Plus Save $40 On Orders Over $999. Use Code: CORKSPORT40
Vancouver, WA


M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Mazdaspeed Turbo Inlet Pipe

Price: $139.99
Price in points: What are Points?140 points
The go to turbo inlet pipe for the Mazdaspeed 3/6 for over 10 years, made from aluminum.
Add to wish list

Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

Constructed from 60mm mandrel-bent aluminum with smooth sweeping curves for optimal flow, the CorkSport Mazdaspeed turbo inlet pipe provides a 14% improvement in flow over the restrictive stock turbo inlet pipe.

The CorkSport Advantage:

  • 60mm Mandrel bent aluminum piping: A true high-performance turbocharger inlet pipe that is made from aluminum piping unlike other silicone turbo inlet pipes on the market
  • Avoid unwanted check engine lights: Designed with a downstream recirculation valve fitting to prevent turbulence backwash around the MAF sensor and avoid unnecessary check engine lights and stumbling
  • Customize your engine bay:Offered in polished aluminum or powder-coated black with blue, red or black silicone to enhance the look of your engine bay.
  • 14% improvement in flow: Replace the restrictive shape of the OEM inlet pipe to improve and smooth airflow resulting in improved boost levels.
  • Compatible: Has been re-designed to fit seamlessly with the OEM intake as well as most aftermarket intakes.
  • Offered With or Without Breather Hose: Optional crankcase breather hose available for turbo vehicles affected by Mazda Service Bulletin #01-002/11 that received a factory fix for turbo smoking due to insufficient crankcase ventilation. This only applies to 2007-2009 Mazdaspeed 3 and CX7 built before July 2008. Click Here to see the whole TSB from Mazda. Page 3 shows a diagram on what to look for to see if your vehicle has had the TSB.
  • CorkSport Service and Support: Receive a two-year limited warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone support

WARNING:The TIP does not work well with the Injen CAI. Requires custom bracket work to fit properly.

Flow Test Results

How To Install the Mazdaspeed Turbo Inlet Pipe

It will take you 1-2 hours to install the Mazdaspeed Turbo Inlet Pipe.

2 hour Install Time

2 hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty



Installation Mazdaspeed Turbo Inlet Pipe

Definitely worth it. Provides much more flow over the restrictive stock pipe. Boost builds much quicker and it provides better response throughout the rev range.

I am running this in conjunction with a K&N CAI and fitment is great. The quality of the pipe is also very good. The welds are beautiful and the polished version is nice and shiny.

I chose this over the alternatives such as cobb as this pipe is made out of aluminum instead of silicone, and this pipe is also slightly more affordable than the cobb unit.
huge improvement over the OEM TIP, building more boost and it sounds nicer!
My '08 average mpg went from 27.5ish to 29 after putting on the CS tip (with a CS intake; and with easy driving). So I'd say this thing is way more efficient than the convoluted stock intake pipe, if you can call it that.
A mod worth doing. Very good product.
Really durable, you hear a good hiss from the turbocharger when ever you're on boost. Very easy install and in my opinion better than a silicone turbo inlet pipe. Boost air temp is incredibly low with my cold air intake from cp-e. There is no other company that makes aluminum inlet pipes other than htp(hi-tuned performance) and corksport. The price was just right for the performance and drivers experience.
I have a 2010 with a SURE SRI. Will this for?
Product quality is a solid 5. Well machined and everything fits perfectly. Powder-coated black looks great and still maintains a stealth approach. Install was easy. Took about 2 hours from start to finish. Taking my time and not rushing anything. Ran this TIP for 2 days with stock intake. I noticed a more linear power band as far as boost pressure, and I can now hold boost at higher RPM levels (6500 RPM). Great product.
All I can say is DAMN!!! This helped my Air Flow so much!!! It is so awesome and made very well! Good Job Corksport.
Hey Derek. If install a turbo inlet in my speed do I need to get a tune up

I am trying to get some information regarding this TIP...I have a 2013 Mazdaspeed3 and would like to upgrade from the stock inlet pipe to let my turbo really breath...However, I have heard that you need to up-grade your fuel pump before? Is there any truth to this....Or will I be safe to install corksports TIP

Thanks for any help

CorkSport:Check out the FAQ on this product listing.
just getting in the grove of my mazdaspeed 6. I have a long tube DC cai. would this be a problem on fitting?.and will it go with a stock ecu without trippin off censors?. since I live in a emission and inspection state I gotta be extra careful.
Write a review

Is this compatible with the corksport 3 inch short ram intake.

Asked by Chayson | 11/07/2022, 03:22 PM | 1 answer(s)

I have a bone stock 2007 MS3, apart from the ventilation update from Mazda. If I swapped my stock TIP with this one, would I require a tune? Would this constitute as an OEM replacement? Thanks!

Asked by Mike | 07/27/2022, 12:41 PM | 1 answer(s)

I may have missed it somewhere, but how many inches is this?

Asked by Charles | 07/16/2021, 07:58 AM | 1 answer(s)

If I have a 07 speed3 with a CSt4 turbo, will I need the valve concerning the recall?

Asked by Dallas Kennedy | 11/12/2020, 07:23 AM | 1 answer(s)

Will this inlet fit a bnrs2 turbo upgrade?

Asked by Telly | 10/02/2020, 12:49 PM | 1 answer(s)

Will this fit if I have a stage 2 short ram intake?

Asked by David Urquiza | 04/01/2020, 07:34 PM | 1 answer(s)

Will this TIP work with the Fujita CAI Part Number: CA-2508 from Street Unit? Thanks.

Asked by David | 10/21/2019, 08:31 PM | 1 answer(s)

I have cs cat back and sri do i need tune or hpfp to add this tip?

Asked by Mark | 07/15/2019, 09:59 PM | 1 answer(s)

Hola Mi Mazda 6 mps es del año 2007, no tiene ninguna modificación. Esta pieza es compatible para mí coche? Gracias

Asked by Juan | 12/10/2018, 10:59 AM | 1 answer(s)

Does this piece work with the HPS SRI?

Asked by Mike | 08/05/2018, 08:36 AM | 1 answer(s)

I want to run stock k04 with the 3.5" corksport power series ms3 intake - should I also install the corksport TIP or does the 3.5" intake not require a stock/aftermarket TIP?

Asked by Justin Bowen | 06/08/2018, 01:52 PM | 1 answer(s)

I have the head of the cork sport 76mm with filter someone stole my TIP out of my garage. Is this the same TIP I need to have everything again?

Asked by Jose | 08/17/2017, 06:33 PM | 1 answer(s)

Will it fit a DC sports cai?

Asked by Dave | 09/06/2017, 10:33 PM | 1 answer(s)

Planning on installing the bnr s4 turbo in my gen2 will this TIP work with the bnr s4

Asked by Moises  | 01/19/2017, 10:15 PM | 1 answer(s)

I have a Cobb CAI, I really want your turbo inlet pipe because of the fact it is aluminum(Better quality), Cheaper Will this fit up with their Intake. I know your parts aren't made to fit there's, Just curious..

Asked by Josh | 04/14/2016, 03:58 PM | 1 answer(s)

I have a 2010 with a SURE SRI. Will this for?

Asked by Nick | 05/31/2016, 06:35 AM | 1 answer(s)

Really want this TIP, Will it Match up will Cobb SRI? This product is much better quality.

Asked by Josh | 04/14/2016, 04:32 PM | 0 answer(s)

If I install the TIP and sylicon elbo, would I pass Ca. Emissions test?

Asked by Neil Brosious | 03/03/2016, 09:04 AM | 1 answer(s)

Back in 12/2014 someone asked if this TIP was compatible with a K&N SRI, you responded by noting that you had not tried it yet. I was wondering if you had any new info.

Asked by Tyson Williams | 01/29/2016, 06:51 AM | 1 answer(s)

I have a 2006 Mazdaspeed 6 with upgraded hpfp, bov. catback exhaust, cobb ap, and CP-E cai. Will this tip be compatible with my CP-E cai?

Asked by Cody | 11/14/2015, 09:23 PM | 1 answer(s)

I was considering between this and the Cobb tuning TIP as I have a Cobb accessport. The accessport only notes "approved" intakes but it really doesn't say anything about TIP/TIH , TMIC, Exhausts etc. The Cobb tuning TIP is significantly more expensive than your product. That being said, is there a difference in air flow or do your products perform the same? Also is there any additional installation needed if I currently have the mazdaspeed CAI installed on my vehicle?

Asked by Jimmy | 11/10/2015, 09:12 PM | 1 answer(s)

So I want to use this TIP with the stock air box on the speed3. Does this TIP come with the silicone intake elbow to connect it to the air box, or would I have to purchase that part separately?

Asked by Dave | 09/30/2015, 02:38 AM | 1 answer(s)

I just bought a BOV and a SRI from you guys. I wanted to know do I have to upgrade my fuel pump before I get this inlet pipe? Thanks

Asked by Lee Louisville | 09/08/2015, 05:38 AM | 1 answer(s)

I want to purchase this inlet pipe but I want to make sure there will be no issues or ad ons I need. Can I install the inlet pipe even with a cp-e cold air intake. Just bolt on and done?

Asked by Jjabaj  | 09/08/2015, 05:36 AM | 1 answer(s)

Will this fit a gen1 and a gen2 MS3 without issues?

Asked by Jeff | 07/29/2015, 09:51 AM | 1 answer(s)

Will this fit an AEM Cold air intake?

Asked by Angelo Cotoni | 07/16/2015, 10:52 AM | 1 answer(s)

Will the turbo spool sound be more prominent if I install this tip with the stock air filter box?

Asked by Dave | 06/20/2015, 10:34 PM | 1 answer(s)

Would i need a tune for this and the stage 1 short ram intake?

Asked by Stephen Duran | 06/18/2015, 06:14 AM | 1 answer(s)

So I currently have the injen CAI installed and I need to upgrade my TIP. How much work am I looking at with having to mod the mounting plate for proper installation? Do you have any tips or pictures of how it can be modded?

Asked by Jeffrey  | 03/31/2015, 02:45 PM | 1 answer(s)

I have a long ram cool air intake,will your TIP,fit without any problemscscart_) thanxx

Asked by ihave a long ram intake,will urTIP fit without any problem? | 03/29/2015, 02:13 PM | 1 answer(s)

I've the SRI and just installed the TIP, but i have the impression that the intake sits a little lower than the stock TIP... Or i just installed wrong?

Asked by Edgar | 02/22/2015, 09:25 AM | 1 answer(s)

I have the stage 1 corksport SRI. Will the TIP work well without any other upgrades, including the stage 2 intake?

Asked by Chris | 02/05/2015, 07:25 AM | 1 answer(s)

Will the cs tip work with a CPe SRI ?

Asked by PJ Wallington | 02/01/2015, 06:14 PM | 1 answer(s)

I have installed the TIP and my car is now idling roughly and vibrates the car... I assume there is a vacuum leak somewhere, any insight? Scares me that my turbo is getting damaged from an air leak.

Asked by Dustin  | 01/02/2015, 08:18 PM | 1 answer(s)

I saw the cai could add a tip for $70 but I believe that's silicone. How good is this power series compared to the silicone? What's the major differences

Asked by Derrick | 01/01/2015, 09:12 AM | 1 answer(s)

I will have to upgrade fuel internals?

Asked by Edgar | 12/13/2014, 10:42 AM | 1 answer(s)

I bought the stage 1 sri for my`10 speed3 a few months ago. If i get a tip, will the carb exemption apply to me?

Asked by Dave | 12/10/2014, 02:49 AM | 1 answer(s)

Do i need a tune for this and will it fit the k&N sri?

Asked by Haden | 12/03/2014, 12:03 AM | 1 answer(s)
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.