360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Mazda 3 2010-2013 Performance Exhaust System, 2.0 Liter Standard and SkyActiv Engine

Ā 
Price: $949.99
Price in points: What are Points?950 points
304 construction for a lasting exhaust for your 2010-2013 Mazda 3
Axl-6-119-14
Add to wish list

2010-2013 Mazda 3 Performance Single Exit Exhaust for the 2.0 liter standard and SkyActiv Mazda engines.

Featuring dual resonators, a slip fit compression connection to the aft end of the catalytic converter and a single tailpipe design, the CorkSport Mazda 3 exhaust eliminates the factory tailpipe muffler and features a non-resonated dual wall 90mm exhaust tip.

During testing, the Mazda3 Cat Back Exhaust went from a baseline of 118hp/110lb ft. of torque to a respectable 135hp and 123lb ft. of torque at the wheels when tested with the Performance Power Series Short Ram Intake. The 2.0L results are moderate at the bottom end (with around a 4-5hp/tq gain) below 4000rpm with the majority of the power coming on rapidly at around 4500rpm and held steadily to the 7000rpm redline. This really shows how constrained the stock system was for the smaller 2.0L engine.


The CorkSport Advantage:

  • Features dual resonators, a slip fit compression connection and single tailpipe design.
  • Mandrel bent Stainless Steel T304 construction for corrosion resistance and clean stylish look.
  • Optional 60mm racepipe with or without high flow catalytic converter* attaches between the factory header downpipe flange and the front compression fitting of the cat-back portion of the exhaust system
  • Distinctive performance sound mild but noticable at cruise and idle and a distinctive growl at wide open throttle and free rev.
  • Picks up all of the stock hanger locations.
  • Power Series exhaust AND racepipe will not cause a CEL (Check Engine Light).
  • Corksport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.

    * HIGH FLOW CATALYSTS ARE NOT AVAILABLE IN CALIFORNIA.

    **Installation of the cat back system requires cutting your factory exhaust system after the second catalyst. The race pipe versions of the exhaust are bolt on with no cutting required. See CorkSport FAQ and Instructions for detailed instructions.

2 Hour Install Time

2 Hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

Mazda 3 2.0 engine how to installation instructions for the Cat back exhaust

love the exhaust. has a really nice deep tone to it while not being too loud, and it's nice and quiet cruising on the highway. literally perfect for a daily driver. super easy install as well, lined up perfectly.
My stock exhaust sprung a leak at the weld on one of the exhaust hangers and was getting worse and worse, bad gas mileage, down on power the whole shebangabang. I did a lot of research and looked at every single exhaust option on the market, over and over again. I was really considering factory exhaust, or I've seen that people have put either the 2.5L or the speed 3 exhaust on their Skyactiv but that seemed like a bit of extra work, and I'd have to get a dual exhaust rear bumper cover, plus I couldn't quite figure out how well it would fit, if it would need to be modified all that, and all the other aftermarket options seemed pretty loud. I just wanted more power without a lot of noise, did not want it to be ricey. I already had the Corksport intake on my car, and the exhaust seemed to add a nice sound without a lot of noise, and corksport makes good stuff so that's what I went with. I put it on yesterday morning and love it. I immediately noticed a difference in power, everywhere, it sounds great, it's loud enough to enjoy it but it's not crazy loud, not droney, and not raspy. It's perfect. And it has a beautiful exhaust tip that just peeks out. I'm super glad I went with the Corksport option, it's great stuff and highly recommended. I just wish there were more power upgrades for the Skyactiv. I saw on YouTube the Skyactiv 2.5L throttle body is direct bolt on and plug and play but is a bigger diameter, dude said he noticed a difference, maybe I'll go to the junkyard and try to find one next.
I LOVE THE EXHAUST! Sounds amazing and made my car have such a nice sound and tone! Very easy to do as well!
Awesome product! The sound is amazing, nice and deep. Hardest part of the install is removing the old exhaust, but you can make quick work of welded nuts with a sawzall and a good blade. Definitely would recommend this product to anyone looking for a throatier, deeper sound
Super easy install with the provided instructions! Love the new sound my mazda3 has combined with the cs intake.
bought this exhaust and I have nothing but incredible things to say about it! corksport delivered quick, the product looked flawless, and the sound I cannot even elaborate on how deep and loud this makes my Mazda 3. it sounds like a Subaru WRX STI. overall I would give the product 100% and I can't wipe the smile off my face ! thank you corksport
Write a review
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.