Save An Additional $15

Part Orders Over $199.99!

Use Code: CSBonus15

360-260-2675

Vancouver, WA

HRS

M-TH 9A-11:30/12:30-5P | F-SU CLOSED

Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Home/Mazdaspeed 6/Mazdaspeed 6 All Parts

Mazdaspeed 6 All Parts

All of the 2006-2007 Mazdaspeed 6 performance parts and accessories are here listed with no filters in order from new to old for easy browsing. Fitment of the parts includes the overseas MPS 6 as well.

Mazdaspeed 4.5 Bar Map Sensor Laser Etched Specs

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Perfect Seal with High Quality O-ring

Save $5.00

Mazdaspeed 4.5 Bar MAP Sensor

$99.99 $94.99

The CS vacuum block helps clean up your Mazda engine bay.

Easily connect a boost gauge or methanol system without the need for tees

Precision machined billet aluminum is anodized for a long lasting finish that looks great

Seven 1/8" NPT threaded ports offer use with a variety of fittings

Simplify your vacuum and boost sources into one location

Small size and end mounting location gives tons of freedom for install location

Simplify your vacuum and boost sources into one location

Save $2.50

Vacuum/Boost Distribution Block

$49.99 $47.49

The CorkSport Intake Manifold for Mazdaspeed is the complete solution for the very poor flowing OE intake manifold.

34mm injector fitment keep the fuel low in the engine bay

Manufactured from 6061-T6 aluminum and post machined for -6AN fuel lines

Add enough fueling to support 800whp

Save $6.50

2007-2013 Mazdaspeed 3 & 6 Fuel Rail Kit ...

$129.99 $123.49

The COBB Accessport works with the Mazdaspeed 3 and Mazdaspeed 6

The COBB AP includes everything shown here, two faces, cables and a case.

Log all of the parameters in your Mazdaspeed

The only fuel pump kit with the upgraded spring

You can customize your AP with faces or paint one and make it unique

Save $52.50

MAZDASPEED COBB Access Port / CorkSport F...

$1,024.99 $972.49

Switch to an external wastegate on your CST4 and CST5 using the CorkSport EWG housing. Designed for Mazdaspeed Turbo

0.82 A/R turbine housing offers large swallowing capacity for greater peak exhaust flow.

Specially designed turbine housing and supplied EWG elbow give flexibility for EWG fitment.

Optimum boost control, easy wastegate spring swaps, and quick servicing with an EWG setup.

Optional dump tube eliminates the need for fabrication during your EWG install.

Save $20.00

EWG Upgrade Kit - CST4 & CST5 Turbo

$399.99 $379.99

Mazdaspeed CST6 Turbo Upgrade - 2006-2013 DISI MZR

Dynogrpah for the CST6 Turbo Upgrade - 2006-2013 DISI MZR

CST6 Turbo upgrade design

CST6 piping for the Mazdaspeed CST6 Turbo Upgrade

Save $100.00

CST6 Turbo Upgrade - 2006-2013 DISI MZR

$1,499.99 $1,399.99

Make your Mazda & Mazdaspeed Intake cleaning kit.

Make your intake valve cleaning much easier with the CorkSport Valve Cleaning Tool.

Reinforced silicone ensures a good seal to easily remove carbon, blasting media, or cleaning chemical from your intake ports.

Cone shaped design & included clamp ensures snug fitment on almost any vacuum.

Ergonomic and compact design allows for easy use in an engine bay

This complete valve cleaning kits provides you with the unique tools needs to clean the intake valves in your Mazdaspeed

Save $3.00

Valve Cleaning Kit for Mazdaspeed and Mazda

$59.99 $56.99

Mazdaspeed 3 Throttle Body Spacer. Billet aluminum is CNC machined and then anodized for great fitment and a clean look.

Mazdaspeed Throttle Body SPace comes with an O-ring is supplied with each spacer for an easy install.

Three pre-tapped methanol ports can be used with most nozzles on the market.

Each methanol port is in a usable location, even with the stock intake manifold.

Save $4.00

72mm Throttle Body Spacer for Mazdaspeed ...

$79.99 $75.99

A complete Big Brake Kit for the Mazdaspeed 6 and 1st gen Mazda 6

Bolt on Mazdaspeed 6 BBK performance, just add brake fluid

Big Brake Kit in purple for Mazdaspeed 6

2 piece rotor with aluminum hats to minimize weight increase to your speed 6

A wide selection of brake pads are available from manufacturers to tailer the braking to your driving style

All of the needed hardware including brake lines and installation instructions are included for the installation

Get some cred for the Mazdaspeed 6 with brakes the Mazdaspeed 6 should have come with from Mazda

Titanium calipers add a level of class with your performance BBK

Classic Red, Black and Blue

Clean & bright silver with a red inlay

Optional Purple Calipers for the Mazdaspeed 6 Big Brake kit

Option Yellow color big brakes for Mazdaspeed 6

Save $100.00

13 inch Big Brake Kit for 2006-2007 Mazda...

$1,599.99 $1,499.99

Mazdaspeed Coolant Temperature Gauage

Quick readouts at a glance

Red display color for mazdaspeed coolant gauage

Red and blue color gauge for Mazdaspeed coolant

Mazdaspeed coolant gauge complete kit

Audio and visual warnings can be programmed for limit values.

Save $6.00

Mazdaspeed Coolant Temperature Gauge

$119.99 $113.99

A fluoroelastomer O-ring provides optimum temperature and chemical resistance.

Removing the OE balance shaft allows your engine to rev easier and provides about 18lbs of weight reduction.

The oil pan baffle ensures a good oil level is retained throughout the pan to prevent oil starvation during aggressive driving.

Tested and verified on a 450+WHP Mazdapeed3.

Save $5.50

Balance Shaft Delete Kit for 2006-2013 DI...

$109.99 $104.49

The increased opening size has been maximized within the OE bolt pattern to optimize flow.

Image 1: Choose for FMIC Setups

Flat face throttle plate improves flow and retains all the strength of OE.

OE Fit and Finish helps the CS Throttle Blend In

The CorkSport Intake Manifold works great in tandem with the CS Throttle Body.

Flowbench Testing shows a 33% improvement in peak flow capacity

GT3582R Testing show improved spool and is to high range power increases

Save $16.50

Performance Throttle Body for 2006-2013 D...

$329.99 $313.49

Mazdaspeed Fuel Injector Puller for 2006-2013 DISI MZR

The tool head was designed specifically for DISI MZR injectors and slides on for a precise removal that won’t damage the injectors.

By utilizing a slide hammer design, the Mazdaspeed injectors can be easily removed.

Using the CorkSport Injector Puller is a snap once you access the injectors.

Save $2.00

Fuel Injector Puller for 2006-2013 DISI M...

$39.99 $37.99

VersaTuner License & Versalink Cable

Save $12.50

VersaTuner Mazda and Mazdaspeed ECU Tunin...

$249.99 $237.49

Cad designed for excellent fitment for your Mazdaspeed 6

The skid tray utilizes the exsting Mazdaspeed 6 mounting points

We scanned the front end of a Mazdaspeed 6 to ensure the perfect fitment of the skid tray

Save $14.50

2006-2007 Mazdaspeed 6 Skid Tray

$289.99 $275.49

Give your Mazda a durable and reliable high pressure fuel line.

CorkSport High Pressure Fuel Line comes with all the necessary hardware.

Manufactured from 314L Stainless Steel for long lasting durability and strength.

Modular design makes vehicle maintenance easy without worry of cracking the OE design.

Easy installation and flexible design to perfectly fit your Mazda MZR DISI engine.

Save $11.00

High Pressure Fuel Line for Mazdaspeed 3/...

$219.99 $208.99

2010-2013 Mazdaspeed 3 and 2006-2007 Mazdaspeed 6 camshafts set.

CorkSport Mazdaspeed camshafts retain factory idle quality while delivering max horsepower and torque.

Developed with the latest design, manufacturing, and casting technologies.

CorkSport Mazdaspeed camshafts were tested on a fully bolted 2013 Mazdaspeed 3.

CorkSport Camshaft have a more agressive grind for longer duration

Save $30.00

Mazdaspeed Camshafts for DISI MZR Motor

$599.99 $569.99

Top view of the CorkSport Dual VTA BPV for Mazdaspeed 3, Mazdaspeed 6, and CX-7.

O-rings are used for all critical sealing interfaces.

The CorkSport VTA BPV is only 2.5” tall which compliments compact engine bays and custom intercooler piping.

VTA ports will then be utilized for medium to high boost and abrupt throttle lift-offs.

The CorkSport VTA BPV has been tested to 50psi.

Save $14.00

Mazdaspeed Dual VTA Bypass Valve

$279.99 $265.99

Mazdaspeed 3 Boost Gauge for Mazda with two color light

The CorkSport Mazdaspeed boost gauge has a 270 degree sweep stepper motor needle.

CorkSport Mazdaspeed boost gauge.

Mazdaspeed motor electronic boost gauge.

Mazdaspeed Mazda Gauges Installed

Save $6.00

Mazdaspeed Boost Gauge

$119.99 $113.99

White face Mazdaspeed oil pressure gauge.

White face Mazdaspeed oil pressure gauge with warning.

Orange face Mazdaspeed oil pressure gauge.

Orange face Mazdaspeed oil pressure gauge with warning.

CorkSport Mazdaspeed Oil Pressure Gauge parts and components.

CorkSport Mazdaspeed oil pressure gauge transducer.

Save $6.00

Mazda and Mazdaspeed Oil Pressure Gauge

$119.99 $113.99

White face Mazdaspeed oil temperature gauge.

Orange face Mazdaspeed oil temperature gauge.

CorkSport Mazdaspeed Oil Temperature Gauge parts and components.

CorkSport Mazdaspeed oil temperature gauge transducer.

Save $6.00

Mazda and Mazdaspeed Oil Temperature Gauge

$119.99 $113.99

Mazdaspeed 3 HPFP pump Internals

Mazdaspeed 3 HPFP Internals Packaging

Mazdaspeed HPFP Internals Packaging Closeup

Speed3 High Performance Fuel Pump Internals

Mazdaspeed Fuel Pump Internals

Save $17.50

Mazdaspeed High Pressure Fuel Pump Internals

$349.99 $332.49

Mazdaspeed 3.5 Bar MAP Sensor

Mazdaspeed Map Seonsor OEM Replacement

Best 3.5 Mazdaspeed 3 OEM map sesnsor upgrade

Save $5.00

Mazdaspeed 3.5 Bar MAP Sensor

$99.99 $94.99

← Prev

1 2 3 4 5

Next →