Home/Mazdaspeed 3/2010-2013 Mazdaspeed 3/Mazdaspeed 3 Power/Other Engine

Other Engine

The CST6 includes a free MAP sensor for your Mazdaspeed 3, 6, or Cx7

Stock flange Mazdaspeed 3 power record holder

Billet compressor wheel with the latest tech for quick response and airflow for your Mazdaspeed

Balanced rotating assembly for durability

Stock Mazdaspeed 3 and 6 downpipe bolt pattern

The stock flange Mazdaspeed power dyno pull

CST6 Turbo Upgrade - 2006-2013 DISI MZR

$1,499.99

Quick view

Our Mazdaspeed turbo upgrade includes a free 3.5 bar map sensor

Featuring a performance CHRA with a forged billet compressor wheel and nine-blade turbine wheel.

We include a complete hardware kit for the installation of the turbo, the other options out there only include a few gaskets

Made from aluminum alloy for increased heat tolerance, the castings are just plain beautiful.

Take in a closeup view of the forged billet performance wheel. Hear it in our video below!

400+ WHP Mazdaspeed 3 turbo is waiting for you

Smartly engineered, our team is eager to send you the power upgrade you need.

Includes an ceramic coated heat shield for a stealth look and OEM operation.

CST4 Turbo Upgrade - 2006-2013 DISI MZR

$1,099.99

Quick view

The COBB Accessport works with the Mazdaspeed 3 and Mazdaspeed 6

The COBB AP includes everything shown here, two faces, cables and a case.

Log all of the parameters in your Mazdaspeed

The only fuel pump kit with the upgraded spring

You can customize your AP with faces or paint one and make it unique

Save $35.00

MAZDASPEED COBB Access Port / CorkSport F...

$999.99 $964.99

Quick view

The COBB Accessport works with the Mazdaspeed 3 and Mazdaspeed 6

The COBB AP includes everything shown here, two faces, cables and a case.

You can customize your AP with faces or paint one and make it unique

The Accessport fits most phone mounting solutions to install in your Speed3

Log all of the parameters in your Mazdaspeed

MAZDASPEED 3 / MAZDASPEED 6 COBB AccessPort

$650.00

Quick view

2010-2013 Mazdaspeed 3 and 2006-2007 Mazdaspeed 6 camshafts set.

CorkSport camshafts replace the OEM Mazdaspeed camshafts for the 2007 - 2013 Mazdaspeed 3 and the 2006 - 2007 Mazdaspeed 6.

CorkSport Mazdaspeed camshafts retain factory idle quality while delivering max horsepower and torque.

Developed with the latest design, manufacturing, and casting technologies.

CorkSport Mazdaspeed camshafts were tested on a fully bolted 2013 Mazdaspeed 3.

Mazdaspeed Camshafts for DISI MZR Motor

$599.99

Quick view

Transmission Mount

Save $29.77

2007-2013 Mazdaspeed 3 Full Motor Mount 3...

$575.99 $546.22

Quick view

VersaTuner License & Versalink Cable

VersaTuner Mazda and Mazdaspeed ECU Tunin...

$549.99

Quick view

Cast end tanks and a high flow intercooler core ensure solid power gains for the Mazdaspeed 3

Following our instructions you can fit the OEM Mazda cover with our upgraded TMIC

Bolt on performance intercooler allows your DIS powered Mazda to perform at a higher level

Mazdaspeed 3 TMIC Top Mount Intercooler

$399.99

Quick view

Switch to an external wastegate on your CST4 and CST5 using the CorkSport EWG housing.

0.82 A/R turbine housing offers large swallowing capacity for greater peak exhaust flow.

Specially designed turbine housing and supplied EWG elbow give flexibility for EWG fitment.

Optimum boost control, easy wastegate spring swaps, and quick servicing with an EWG setup.

Optional dump tube eliminates the need for fabrication during your EWG install.

EWG Upgrade Kit - CST4 & CST5 Turbo

$399.99

Quick view

CorkSport HPFP Internals

CorkSport HPFP Internals Packaging

CorkSport HPFP Internals Packaging Closeup

CorkSport High Performance Fuel Pump Internals

Mazdaspeed Fuel Pump Internals

Mazdaspeed High Pressure Fuel Pump Internals

$349.99

Quick view

Throttle Body, Silicone and all the Installation Hardware is included

The CorkSport Throttle Body offers increased flow and performance without compromising OE fitment and drivability.

The increased opening size has been maximized within the OE bolt pattern to optimize flow.

Flat face throttle plate improves flow and retains all the strength of OE.

OE Fit and Finish helps the CS Throttle Blend In

The CorkSport Intake Manifold works great in tandem with the CS Throttle Body.

Flowbench Testing shows a 33% improvement in peak flow capacity

GT3582R Testing show improved spool and is to high range power increases

Performance Throttle Body for 2006-2013 D...

$329.99

Quick view

Top view of the CorkSport Dual VTA BPV for Mazdaspeed 3, Mazdaspeed 6, and CX-7.

O-rings are used for all critical sealing interfaces.

The CorkSport VTA BPV is only 2.5” tall which compliments compact engine bays and custom intercooler piping.

VTA ports will then be utilized for medium to high boost and abrupt throttle lift-offs.

The CorkSport VTA BPV has been tested to 50psi.

Mazdaspeed Dual VTA Bypass Valve

$279.99

Quick view

← Prev

1 2 3

Next →