Mazdaspeed 3 Adjustable Short Shifter

The CorkSport Mazdaspeed 3 Adjustable Short Shifter designed as a direct OEM replacement, maintains OEM fitment offering you to independently adjust shift throw distance and shift knob height.

The CorkSport Adjustable Short Shifter is designed using CAD technology, a lightweight and stronger anodized shifter body and machined from 6061-T6 aluminum.

2 Way Adjustable
CorkSport's CAD design will allow you to precisely adjust your shift throw to your driving style. Designed to let you drive your Mazdaspeed 3 the way you want to.

Shifter Height
The CorkSport engineers created a simple way for you to adjust the shift knob height a range of 4 inches. With a height of 12" and a low of 8"

Shift Throw
Adjust your shift throw up to 35% shorter than OEM for faster and efficient shifting.

Easy OEM Replacement
Designed to easily replace the OEM plastic design with a durable machined aluminum body to handle a variety of shifting styles from the casual to aggressive driver.

Designed: Specifically for the 2010-2013 Mazdaspeed 3.

Shift Throw: Up to a 35% shorter shift throw over OEM.

Shift Knob Height: Up to 4 inches of shift knob height range with high of 12" and a low of 8"

Versatile: Compatible with the OEM system and easy to use the OEM or aftermarket shift knob options.

Ease of Use: Easy to install, you will be ready to short shift within an hour.

CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.

How To Install Mazdaspeed 3 Adjustable Short Shifter. It will take you 1-hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

I'm glad I waited for this! This thing is just beautiful. Install was about 30-40 mins. Only problem I had was adjustment otherwise install would have been about 30 mins. I made a special tool to take out that brittle self locking plastic cap. Awesome and a MUST HAVE product. Shifting is amazing, I didn't really know how long of a throw I had until the install. Exceptional job guys!

Rory Chung04/30/2014, 09:26 PM

What about in combination with the short shift plate? 75% reduced throw if both set to max reduction, hmm? I like the idea, if not in conjunction with the plate then what different effect is there vs the plate? The plate reduces the throw to 2, 4, 6. Where is the reduction most evident on this? How much lower vs stock height does this adjust to?

Thanks!

Reza Bahador04/29/2014, 04:14 PM

Will this be coming out for the speed6

Chris04/22/2014, 07:02 AM

Will there be a 5 speed version of this in the near future? If you need someone to test it, I don't live close but I am more than willing to help out.

Corey Haury04/16/2014, 05:52 AM

Put it in last night!! Although I had a problem with getting the Shift Cables off of the base and getting the Shifter Cup out of the base installation was a breeze! Shifting this morning on my way to work was amazing! so smooth! Very Precise! Short Throws! Highly Recommended!!! Thanks Corksport!

Michael Dang04/11/2014, 07:58 AM

Is there a skyactiv shirt shifter available?

Danny Herrera04/10/2014, 10:04 PM

Can this be used with the short shift plate or do you have to put the original one back on. Thanks

Carlos Rivera04/10/2014, 12:04 AM

Ordered the shifter Thursday, received and installed today (Tuesday), and so far I love it. The throws are a lot shorter (customizable) than even my short shift plate I had installed, and the ability to adjust the height is also a great feature as well. The shifts felt more precise and overall really smooth. Install wasn't bad at all, an hour give or take a few minutes sounds about right (you're probably going to spend a few extra minutes adjusting the shifter's height and throw to your liking). Really pleased with the product, it's definitely a must-have, even for every day non-spirited driving. Thanks again for an A+ product.

Enrique Capeluto04/09/2014, 05:58 PM

Will this work well with your shifter plate already installed?

David Ferron04/07/2014, 10:23 PM

I was the beta tester for this shifter. My overall impression of this is that its probably one of the best mods we can have, for the price. This removed all of the sloppiness the oem shifter has. Throws are definitely more precise, and on point. Having driven speeds, both gen1 and gen2, that had the TWM full replacements, there is a difference, not only price wise, but the fact that i was able to adjust the height, and throw, saved my pinky from being smashed into the ashtray lid.

Installation is very easy, the instructions are spot on. I had it installed in under 45 mins, and 15 mins to adjust the cables.

Shifter has handled all the beatings I've thrown at it on the street, and i look forward to using this next week at the Epic Meet at the track.

Voltron Loco04/04/2014, 10:26 AM

← Prev

1 234

Next →

Write a review

What is the thread pattern of the shifter? I bought a new shift knob but none of the adapters seem to fit so I want to make sure I have the right size in mind before buying more

Asked by Jarom | 04/11/2022, 09:51 AM | 1 answer(s)

Just curious if there has been any adjustments or modifications to the shifter recently. I have seen a lot of post talking about the alignment and how it’s off to the left or how it’s doesn’t sit in the same neutral spot as OE. Thanks, Tyler

Asked by Tyler Sopo | 09/26/2020, 08:30 PM | 1 answer(s)

Again, a question from Japan. I'm sorry if it's a strange text because it will be translated and written. 2010-2013 Does a malfunction occur when the Mazdaspeed 3 Adjustable Short Shifter and Mazdaspeed 3 Short Shift Plate are installed together? Please answer as international calls are difficult.

Asked by KEIJI SHIRAKATA | 01/19/2020, 07:40 PM | 1 answer(s)

This is a question from Japan. I'm sorry if it's a strange text because it will be translated and written. 2010-2013 Can the Mazdaspeed 3 Adjustable Short Shifter and Mazdaspeed 3 Short Shift Plate be installed together? Also, is it possible to attach it to mazdaspeed3 in Japan? Please answer as international calls are difficult.

Asked by KEIJI SHIRAKATA | 01/13/2020, 04:11 PM | 1 answer(s)

Does it work with short shifter plate ?

Asked by Josue | 01/12/2020, 07:45 PM | 1 answer(s)

What’s the difference between the one offered for 10-11 and the one for 12-13?

Asked by Ryan | 05/22/2019, 08:33 PM | 1 answer(s)

Will this fit on gen 3 Mazda 3?

Asked by Jack | 06/02/2018, 03:17 PM | 1 answer(s)

Does this retain the OEM reverse lockout feature (required push-down of knob)? thanks,

Asked by Timothy Sattler | 10/06/2017, 10:59 AM | 1 answer(s)

Will this fit on a 5-speed mazda3 2010?

Asked by Patrick | 07/20/2016, 05:05 PM | 1 answer(s)

Silver spring from OEM shifter won't fit corksport short shifter after so much usage. Can I buy one of these from you guys?

Asked by James | 09/23/2016, 05:22 PM | 1 answer(s)

Will gen 2 fit on gen 1?

Asked by Don | 06/25/2016, 07:00 AM | 1 answer(s)

I'm hesitating between getting "Short Shift Plate and Shifter Bushings" set or this "Adjustable Short Shifter". What are pros/cons between the two? Can or should I get both? Thank you

Asked by Nick Korolkov | 08/20/2015, 05:21 PM | 1 answer(s)