Mazdaspeed 3 Adjustable Short Shifter

	CODE	Model Type	Availability	Price
	CODE:AXL-6-963-11	Mazdaspeed 3 6speed (2010-2011)	Availability:In stock	$199.99
	CODE:AXL-6-963-12	Mazdaspeed 3 6speed (2012-2013)	Availability:In stock	$199.99

The CorkSport Mazdaspeed 3 Adjustable Short Shifter designed as a direct OEM replacement, maintains OEM fitment offering you to independently adjust shift throw distance and shift knob height.

Materials & Design

Best 2010-2013 Mazdaspeed 3 Adjustable Short Shifter

The CorkSport Adjustable Short Shifter is designed using CAD technology, a lightweight and stronger anodized shifter body and machined from 6061-T6 aluminum.

2 Way Adjustable
CorkSport's CAD design will allow you to precisely adjust your shift throw to your driving style. Designed to let you drive your Mazdaspeed 3 the way you want to.

Shifter Height
The CorkSport engineers created a simple way for you to adjust the shift knob height a range of 4 inches. With a height of 12" and a low of 8"

Shift Throw
Adjust your shift throw up to 35% shorter than OEM for faster and efficient shifting.

Easy OEM Replacement
Designed to easily replace the OEM plastic design with a durable machined aluminum body to handle a variety of shifting styles from the casual to aggressive driver.

Designed: Specifically for the 2010-2013 Mazdaspeed 3.

Shift Throw: Up to a 35% shorter shift throw over OEM.

Shift Knob Height: Up to 4 inches of shift knob height range with high of 12" and a low of 8"

Versatile: Compatible with the OEM system and easy to use the OEM or aftermarket shift knob options.

Ease of Use: Easy to install, you will be ready to short shift within an hour.

CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.

How To Install Mazdaspeed 3 Adjustable Short Shifter. It will take you 1-hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

This is a must have upgrade for your car. I had the short shift plate, and ran into an issue with Ball and nut coming loose. The install was pretty straight forward with the supplied instructions. And really enjoy the short shifts again. Sloppiness is gone when I shift, and feel more comfortable shifting.

Scott05/12/2015, 04:24 PM

So I purchased this short shifter and only heard good things! But have not installed yet because I'm scared I'll break the retainer clip.. I know it says use a pick tool and flat head but still feel as if I'll break it.. anyone have any other suggestions?

Ted04/20/2015, 06:18 PM

great product... install was simple... shifts feel amazing...

Donald Kairewich04/13/2015, 03:38 PM

Does this replace the short shift kit? Do I remove any short shift kit i have under the hood before installing this?

Robert02/28/2015, 10:07 AM

So Far, So Awesome-

I purchased this short shifter shortly after their release in April 2014. And all I have to say is- finally!

Finally there is a reasonable alternative to the $450+ full short shift replacements.

I installed this mid/late-April along with the CS shifter base bushings after receiving my order (Corksport actually called me to inform me my order would be a little late. An actual phone call, go figure. +10 for customer service) and installed the CS base bushings, CS short shifter, and plopped my Razo RA68A (fantastic knob btw) on top. I ended up having the linkage attached to the shifter at the 2nd to shortest setting, and the knob height maybe 1 1/2 - 2cm above the lowest setting.

I gotta say, holy hell. The shifter now feels like what the stock shifter SHOULD have felt like. MUCH shorter and more pleasant to use in both daily and high-throttle circumstances. A long time ago I drove my buddy's Speed MX-5 and was impressed with the shifter, and this model is not too far behind. Slamming through gears is very quick and almost faster than the synchros (or maybe my left foot?) can handle. Do note it really doesn't affect your 2-3 and 4-5 shifts, but the 1-2 and 3-4 shifts are magic.

The only con that I can think of is really that it doesn't have the bend of the original shifter, which leaves it a bit off center and about a cm away from the ebrake during 6th, but I really don't find that to be an issue. I have seen some more OCD forum members complain about that, however about a week or two of use and it hasn't really bothered me.

It's been 8 months now and I have no complaints. Would definitely recommend. Do the shift base bushings and a nice heavy knob at the same time and you won't regret it.

Phil01/04/2015, 08:03 PM

will this fit MS6?

Jordan10/09/2014, 03:00 PM

What a fantastic upgrade! Kills the terrible shifting experience when adjusted to your liking. Install wasn't bad at all except for one stupid clip! Seems this car is stuffed full of annoying clips all over. Kicks the crap out of the CS shift plate too as I uninstalled that shortly after except for the reduced weight. A+

Ryan Feeley06/14/2014, 04:18 PM

Havent bought this yet.... But if i already have the short shift plate will this still make any difference? Will i have ultra short shifts?

Kyle Singleton05/21/2014, 03:14 PM

Can I use this with your short shift plate and brushings?

Randy05/20/2014, 11:09 PM

Will this ever be made for the 5 speed 2nd gen mz3??

Zachary Walter05/20/2014, 09:19 PM

← Prev

123 4

Next →

Write a review

What is the thread pattern of the shifter? I bought a new shift knob but none of the adapters seem to fit so I want to make sure I have the right size in mind before buying more

Asked by Jarom | 04/11/2022, 09:51 AM | 1 answer(s)

Just curious if there has been any adjustments or modifications to the shifter recently. I have seen a lot of post talking about the alignment and how it’s off to the left or how it’s doesn’t sit in the same neutral spot as OE. Thanks, Tyler

Asked by Tyler Sopo | 09/26/2020, 08:30 PM | 1 answer(s)

Again, a question from Japan. I'm sorry if it's a strange text because it will be translated and written. 2010-2013 Does a malfunction occur when the Mazdaspeed 3 Adjustable Short Shifter and Mazdaspeed 3 Short Shift Plate are installed together? Please answer as international calls are difficult.

Asked by KEIJI SHIRAKATA | 01/19/2020, 07:40 PM | 1 answer(s)

This is a question from Japan. I'm sorry if it's a strange text because it will be translated and written. 2010-2013 Can the Mazdaspeed 3 Adjustable Short Shifter and Mazdaspeed 3 Short Shift Plate be installed together? Also, is it possible to attach it to mazdaspeed3 in Japan? Please answer as international calls are difficult.

Asked by KEIJI SHIRAKATA | 01/13/2020, 04:11 PM | 1 answer(s)

Does it work with short shifter plate ?

Asked by Josue | 01/12/2020, 07:45 PM | 1 answer(s)

What’s the difference between the one offered for 10-11 and the one for 12-13?

Asked by Ryan | 05/22/2019, 08:33 PM | 1 answer(s)

Will this fit on gen 3 Mazda 3?

Asked by Jack | 06/02/2018, 03:17 PM | 1 answer(s)

Does this retain the OEM reverse lockout feature (required push-down of knob)? thanks,

Asked by Timothy Sattler | 10/06/2017, 10:59 AM | 1 answer(s)

Will this fit on a 5-speed mazda3 2010?

Asked by Patrick | 07/20/2016, 05:05 PM | 1 answer(s)

Silver spring from OEM shifter won't fit corksport short shifter after so much usage. Can I buy one of these from you guys?

Asked by James | 09/23/2016, 05:22 PM | 1 answer(s)

Will gen 2 fit on gen 1?

Asked by Don | 06/25/2016, 07:00 AM | 1 answer(s)

I'm hesitating between getting "Short Shift Plate and Shifter Bushings" set or this "Adjustable Short Shifter". What are pros/cons between the two? Can or should I get both? Thank you

Asked by Nick Korolkov | 08/20/2015, 05:21 PM | 1 answer(s)