LED Light Kit for 2014+ Mazda 3

CorkSport's LED light kit replaces the incandescent bulbs for the front and rear dome lights, vanity visor lights, license plate, and trunk lights. The lights are simple to install, with no custom adapters or wiring required.

The CorkSport Advantage:

Blue-White Color: 7000k color temperature enhances interior colors compared with the yellow light emitted by incandescent bulbs.
Retains the interior dimming: Dimmer light switch is still usable in the Mazda 3.
Longer lifespan: LED lights resist shock and vibration better than standard bulbs.
Less is more: LED lights generate less heat and have a lower power draw.
Simple Install: The kit includes 8 LED bulbs and includes vehicle specific installation instructions. Installation of the LED lights takes 30 minutes and requires only a small screwdriver.
CorkSport Service and Support:Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support.

The lights arrived quickly and look great on my 2015 3HB! There was one tiny light in the front/center of the kit with nothing noted in the instructions for it. Any idea what that is for? It looks like it is marked T5-1P.

Chris M03/15/2015, 04:29 PM

Love the look of the lights and easy to install. Map lights flicker ever so slightly when dimming.

Tini01/23/2015, 06:43 AM

Add a very clean and bright light to the interior cabin and the LEDs for the license plate are great. My only complaint is that the light for trunk interior is not brighter.

Tyler Merrick01/12/2015, 01:41 PM

Love this product. Nice white lighting throughout car, not to over done. Rear license plate bulbs were slightly tight to fit on my 2014 Mazda 3 Astina Sedan.

Andrew Morris11/27/2014, 02:21 AM

These lights are very good, except for the rear trunk light. That one is really dim and I'd probably recommend buying an LED bar for that one instead.

Daniel Chen11/06/2014, 10:48 PM

Love the lights, they look great! I agree with Si Wong, the instructions need to include the sedan, as its not immediately obvious that you have to remove most of the trunk lid liner.

I am disappointed to say it appears CorkSport removed my previous comment where I had noted that the kit did not include the correct led for the trunk light. They told me to contact them for the correct led and then never responded to my email...

Dustin H05/17/2014, 07:58 PM

Love this Corksport LED light kit. I just received and have almost all of it installed but I am having some trouble with the installation/directions for my license plate lights. Can you help me? I have the 2014 S GT Sedan and can't quite figure how to get the light covers off without breaking them. Any help would be greatly appreciated. Otherwise, everything is awesome! Thanks Corksport!

Matt W04/03/2014, 08:31 PM

Great lighting! Wish there were instructions for the sedan license plate lights though. Took me a bit longer to figure out how to access them through the trunk lid liner.

Si Wong03/12/2014, 09:53 AM

Any word on the kits being updated for the Sedans? Just got a 2014 Mazda3 sedan for the fiance and want to upgrade the lights.

Mike02/10/2014, 12:15 AM

Interior lights look great! Only thing is, the trunk light on my 2014 mazda3 sGT sedan is different than the bulb that the kit came with, and the license plate light covers aren't the same as in the instructions.

CorkSport Reply:DH give us a call, we will get you setup. We are changing the kit to have the correct lighting for sedans.

DH01/21/2014, 08:21 PM

← Prev

12

Next →

Write a review

It is fully compatible with Mazda 3 2016 Sedan?

Asked by Rolando | 08/17/2021, 04:24 PM | 1 answer(s)

Does this kit fit the 2018 Mazda 3 Hatchback?

Asked by Tim | 05/19/2018, 09:24 AM | 1 answer(s)

I bought PrecisionLED kit for around $90, last year, and have to keep replacing them cause they tend to start flickering, and not very long after installation. Is this a specific issue with Mazda that I can be sure these bulbs are resistant to?

Asked by Jason Johnston | 04/02/2019, 02:13 AM | 1 answer(s)

Will these work in the 2018 models?

Asked by Justin | 06/26/2018, 08:43 PM | 1 answer(s)

Would these fit a 2018 3 hatchback?

Asked by Josh boettcher | 07/28/2018, 09:57 AM | 1 answer(s)

Do these fit a 2018 3 hatchback

Asked by Josh boettcher | 08/05/2018, 04:17 PM | 0 answer(s)

It is fully compatible with Mazda 3 2017 SportSedan?

Asked by David | 11/29/2016, 05:06 AM | 1 answer(s)

I used an inexpensive led set and the dome light would still glow when they should be off. Would these have the same issue? What makes these different from different sets out there?

Asked by Danny | 08/11/2016, 12:49 PM | 1 answer(s)

I purchased and installed this product in my 2014 Mazda 3. I am getting a lot of flickering from the map lights and vanity mirrors, is this normal? Can it be corrected?

Asked by Vaughn Macfarlane | 07/22/2016, 03:00 PM | 0 answer(s)

I purchased and installed this kit in my 2014 Mazda 3 but I am experiencing flickering from the map and vanity bulbs? Is this a common issue? Can it be fixed?

Asked by Vaughn Macfarlane | 07/21/2016, 08:29 PM | 0 answer(s)

How bright are the LEDs (lumen rating)?

Asked by Justin | 10/04/2015, 02:35 PM | 1 answer(s)

The lights arrived quickly and look great on my 2015 3HB! There was one tiny light in the front/center of the kit with nothing noted in the instructions for it. Any idea what that is for? It looks like it is marked T5-1P.

Asked by Chris M | 03/16/2015, 09:44 AM | 1 answer(s)