Mazdaspeed 3 Turbo Back Exhaust 2010-2013

	CODE	Resonated Back Section	Availability	Price
	CODE:AXL-6-116-12	Non Resonated (Loud)	Availability:In stock	$1,599.98
	CODE:AXL-6-116-10	Resonated	Availability:In stock	$1,599.98

The best looking, sounding, and performing exhaust for the Mazdaspeed 3. You have come to the right place if you want the best. Using the best materials in construction, providing the best dyno performance, including the best step-by-step instructions, and the best customer service, it's easy to see that we are not exaggerating.

Read The BlogProduct Release! CorkSport 2010+ Mazdaspeed 3 Axle Back Exhaust

New Options! You can choose the optional non-resonated rear version of our cat back to take the sound level up a notch. We made this option available due to customer feedback from those wanting a turbo back that captures the Mazdaspeed 3's flat exhaust note.

The CorkSport exhaust features mandrel bent 80mm piping, a straight through high flow resonator for a smooth flow, increased power, and faster spool up. Corrosion-resistant T304 polished Stainless Steel construction with 100mm stainless steel tips ensures long life; stainless steel resonator packing means no worrying about burning out and rattling. As with all of our CorkSport exhausts, the Turbo Back exhaust is precision TIG welded, making for a solid connection, cleaner look, and powerful presence.

Thoroughly tested, this exhaust has peak power gains on the dyno with increases up to 50 wheel horsepower over stock with the needed supporting parts (Max Flow Fuel Pump, Intake and Accessport.)

For off-road & race use only
HPFP upgrade and tuning required for proper and safe operation.
A check engine light (CEL) will be illuminated on catless and some catted setups as a result of installation.
Only fits on turbochargers with OEM downpipe flange shape.
If you have a CS turbo and are running an EWG off the turbine housing, the wastegate will need to be moved to the turbine housing directly and a new dump tube used. CS part number GEN-6-575-17 is needed and it is available for purchase HERE.

Additional Information

Options allow you to get the exhaust you want, loud or over the top loud.
Stainless Steel T304 construction with 100mm stainless tips for corrosion resistance and clean stylish look.
Mandrel bent, true 80mm piping for increased flow and more power from your engine.
Metallic Catalyst: High-flowing 4" diameter 300cel metallic catalytic converter.
Stainless steel resonator packing for a deep tone and long life.
CorkSport service and support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.

How To Install the Turbo Back Exhaust

It will take you Approx. 6+ hour to install.

6 hour Install Time

4/5 Difficulty

2-Year Warranty

Yes CEL

Cat Back Install Instructions

Downpipe Install Instructions

Finally got around to getting the turbo-back installed. The DP is a pain to get in as you've probably read elsewhere or other reviews here. Purchased the resonated version for my '13 MS3.

Regarding the sound, it is noticeable when light accelerating however not overpowering at all. Nice deep throaty tone and don't have to kick up the radio any higher when I'm driving normally. Does however show up when at WOT though. When cruising, there is almost no difference in stock. Barely hear it which is nice being my daily driver. Also no drone which I can detect.

In the end I can easily say that this system is excellent. Has a great sound and noticed the increased HP with a much quicker spool in the turbo, still running the stock one. Would recommend this for those who want a top notch system and want to drive without making sacrifices to daily drivability. Of course if you want crazy loud then CS has you covered with the non-resonated version.

Ryan Feeley07/08/2018, 02:44 PM

Purchased the non-resonated version, really happy with this system. Great sound, easy install, top-notch quality.

Isaac Delamater04/04/2018, 10:08 PM

Just picked up the Speed and WOW! You want REFINED? Buy this exhaust system. Others have written the reviews that convinced me to save for this whole system, and I concur: This system is awesome! The word that keeps coming back to me is REFINED! No, this system is not cheap, but I, who have never bet a nickel, would bet you that this is the best tuned exhaust system made for the Gen2 MS 3! The deep and throaty sound is so amazing and it sounds to CLASSY. This is not your “coffee can” 4 cylinder exhaust that I hear so much in Arizona. It’s an appropriately loud sound on acceleration, but in 6th gear I can talk, hear the Bose system, and be aware of traffic.

This is one of the best mods I have done....and I have done quite a few since buying this wonderful car!

Rev David Poedel09/29/2017, 12:37 PM

Easy five star, welds are perfect fitment takes a little work no fabricating though. Just letting you know the fifth nut on the turbo for the downpipe has to go first or you wont be able to get it on. The sound is amazing loud when you want it to be quiet when you don't "cops" (high-flow cat, resonated 80mm). Important note: DO NOT RUN COBB MAPS FOR CORKSPORT PARTS there will be considerably more predetonation knock for example I recorded 8.09 with cobb and only 1.52 with corksport which very well could have been a bump in the road.

Ethan Grimes08/06/2017, 08:18 AM

The exhaust is breath taking, but I do suggest to get the resonated exhaust it's still loud but I bought the non resonated and it is really loud. And when I say loud it's excessive. I'll have my radio up 75% and can barely hear it over the exhaust. The videos online that you find dont give justice to how loud they actually are. Over all though the exhaust sounds amazing and the power gains are more then noticable and I am very happy with my purchase.

Be prepared when you purchase and install the the most lower forward nut that attaches the dp to the turbo is extremely difficult to put on, seems like it won't fit but it will this nut has to go on before all the others on the do.

IAN06/04/2017, 09:37 AM

2013 Speed3

I ordered the Turbo-back exhaust with high flow cat and resonated. I have had this for almost a year now, it sounds amazing. Cold starts are pretty loud. When it warms up the idle is quiet. Low RPMs can be quiet if you want them to be. Can be loud and have a great tone if you want it to. Sounds best at high RMPs and WOT. I got resonated for just that reason. I didn't want to be cruising the streets of my neighborhood with an obnoxious exhaust. Can be quiet and can be loud. The exhaust doesn't necessarily backfire, but if you cruise in 2nd or 3rd gear without acceleration makes cool gurgle sound.

DP install was kind of a pain. It does not come with a rubber for the DP, you have to buy a new one or reuse the old one. Other than that the CBE was very easy to install. I do recommend getting the urethane exhaust hangers.

Joe04/04/2016, 09:46 AM

Just installed the 2010-2013 Mazdaspeed 3 Cat Back Exhaust & Downpipe.

Just a few things:

The sound clip on the website or wherever else you might find, do not do these things justice. Yes, they sound good online, but when I first fired this thing up in person, it gave me chills in the best way possible. Loud, but not overbearing. A truly beautiful deep sound register.

The restrictive feeling you get from the stock system in the upper RPM's is gone. It pulls through with full power all the way into the higher RMP's.

Also I notice a considerable gain in how hard my car pulls already, with just these two items installed.

Have been modifying my vehicles for years, but this is without a doubt the best Exhaust/Downpipe combo I have ever seen.

Great Price on top of all of this... These two items combined are a must in my opinion!

Sylver01/07/2016, 09:20 AM

I went Turbo Back with the High Flow Cat.

almost 14 months later....one of the best upgrades I made

Joe Furtney07/06/2015, 04:09 PM

I installed this 2 months ago and it is amazing!!! I love how loud it is; just perfect not to loud not to soft. You cant beat the price either. Great Job Corksport!

Charles Ming05/22/2015, 02:38 PM

I just installed both the DP and CBE and when I first turned it on, it felt like when I was a kid unwrapping my present to see that I got a NES console. The deep tone of the exhaust rumbling gave chills to my soul and when I gave it a little gas, sh*t just got real. An unknown Corksport entity whisper in my ears saying "welcome to the dark side". Anyway the installation wasn't a breeze, but i got it done. The power gain is insane. Thank you CS for making this masterpiece!

Naga04/09/2015, 08:44 AM

← Prev

Write a review

Does it fit with BNR S4 V4?

Asked by Diego Granados | 07/19/2023, 11:18 PM | 1 answer(s)

I'm not quite sure whats the difference between your 3.5" turbo back exhaust at 1,299$ and this one? Which is the better option and what would be the difference?

Asked by Matthew | 03/22/2023, 08:57 AM | 1 answer(s)

What’s the pipe diameter?

Asked by Dan | 04/04/2022, 09:04 PM | 1 answer(s)

Can I run this without a tune?

Asked by Nelson A Day | 10/12/2021, 01:00 PM | 1 answer(s)

So is it bad to run this setup with an off the shelf Cobb tune then?

Asked by Trey | 06/08/2021, 06:26 PM | 1 answer(s)

does this come with all hardware needed? ie bolts/hangers/etc or do we have to re use them

Asked by mike | 08/28/2018, 09:02 AM | 1 answer(s)

Does anyone have video in the sound difference between the resonated exhaust and non-resonated exhaust. I want to see how I would prefer to buy this exhaust.

Asked by IAN | 09/18/2016, 03:41 AM | 0 answer(s)

I know it's possible to instal the Mazda 3 2.5 exhaust onto a Mazda 3 skyactiv, but is it possible to put this exact exhaust onto the skyactiv?

Asked by Lisa | 08/06/2016, 08:23 PM | 1 answer(s)

Any drone?

Asked by Joe O | 08/24/2016, 07:34 AM | 1 answer(s)

If i purchase the full turboback exhaust can i swap the 80mm for the stock 65mm?

Asked by Julio Tejada | 06/21/2016, 09:59 AM | 1 answer(s)

I'm thinking about ordering the Turbo fatback exhaust. But was wondering if that included the race pipe as well?

Asked by Mike | 02/13/2016, 09:40 AM | 1 answer(s)

If I purchase the midsection w/o axle back, will the piping bolt right up the the stock gen 2 axle back?

Asked by Avery Benitez | 12/29/2015, 07:07 PM | 1 answer(s)

If I ordered the kit with only the midpipe section (no axle-back) would you guys offer the single-exit piece to finish the exhaust? I'm a fan of the lightweight aspect but didn't saw it wasn't an option.

Asked by Matt | 12/20/2015, 01:41 PM | 1 answer(s)

I just ordered the full turbo back exhaust. Can I run this with out the high flow full pump for a while until I can save up and install it, or do I need to do that before the install of the exhaust?

Asked by Brett Barnhill | 11/29/2015, 10:42 PM | 1 answer(s)

Hi, could you tell me if this turbo back exhaust is emissions legal in Ontario, Canada? Also, will I need to order a donut ring for this install or does this include everything needed?

Asked by bill mah | 11/04/2015, 08:44 AM | 1 answer(s)